Faster and Louder! Fitting an Arrow Exhaust system to a Suzuki GSXR 1000 with Woolich re flash ECU
Автокөліктер мен көлік құралдары
Dave has an L7 Suzuki GSXR 1000 on the bench for a full Arrow exhaust system to be fitted.
Compared to the stock exhaust it's lighter, prettier and makes more power.
Dave will show you how he fitted the system and then the bike heads to Black and White bikes for a Woolich remap to take full benefit of the extra gas flow available.
If you'd like an Arrow exhaust system, or many other race parts, check out www.obsessionengineering.co.uk
and big thanks to Paul at Black and White bikes
www.blackandwhitebikes.co.uk
Пікірлер: 48
As the children like to say Dave "that was sick" 👌
That sounds awesome love those arrow pipe's and straw coloured header's who wouldn't want that!
Great channel great content
Great looking logo! Very classy 🥇
Awsome video
Neat. Mine got the exact same HP as yours.
Arrow is a great brand! Have a good one buddy
excellent! thanks.
Nice one was looking at an arata titinium system for my06 gsxr 1000 but seller said touching the bodywork and oil cooler has to be spaced forward,, so I'll be waiting a while longer 😁😁 great video ☘️☘️☘️☘️☘️ from northern Ireland
I assume you wipes down the exhaust before starting it The system looks well enjoyed your video
Claire says you have a very reassuring voice
"Pull the hose off my pipe" "Give it a wiggle and it will pop out of the hole" "Get in touch and I'll sort you right out" Why does everything you say sound so dirty, Dave? 😂 Like the new logo!
Well done Wavey, Ive got and R6 exhaust in my shed ,can you fit a bike to it? and how are you on Aston Martin db9s ,mine has been in storage for the winter, apparently the electrics didn't like it.
@obsession_engineering
2 жыл бұрын
No problem... Did I mention the hourly rate? 😂
@dougfoster-stiles9805
2 жыл бұрын
@@obsession_engineering That and the collection / travel expense's from the Cotswolds
Really!
Hi, I have a k9 with a full titanium exhaust system. I am running a PC5. Should I run it with or without a lamba sensor? Regards John
@obsession_engineering
Жыл бұрын
Usually without, as the lambda will be trying to correct the power commander alterations
Are you able to fit yoshiumara slip on to these headers??
@obsession_engineering
7 ай бұрын
Not sure, but also not sure why you would, the arrow stuff is better quality
Hello. what is the arrow model of collector? I noticed it's 1-4 2-3 thanks
@obsession_engineering
Жыл бұрын
The headers are the same for all the arrow L7+ systems, code 71160 and you're correct 1-4/3-2 at the collector
@maurosantos2959
Жыл бұрын
in the movie it is 1-2/3-4 which model? thanks
Do new bikes benefit from full systems?
@obsession_engineering
2 жыл бұрын
Definitely. The standard systems are heavy and still restrictive, although the bikes in general make more power than we need, who doesn't want more? 😁
Is this the Full Competition 71161ckz?
@obsession_engineering
Жыл бұрын
Yes
What your think about akrapovic evolutionline exhaust
@obsession_engineering
Жыл бұрын
Good quality pipes, I've used akrapovic over the years and always been very nice
@crossplaneloverkuldeep93
Жыл бұрын
@@obsession_engineering ohh yes
@flamintasty
Жыл бұрын
@@crossplaneloverkuldeep93 i have the Akrapovic Evolution Line Titanium and a custom remap on my 2018 GSXR 1000R. On the dyno it was mapped on it made 196hp at the tyre. What that equates to on other dynos, I have no idea. It will be on the dyno again soon, I may even attempt at making a video of it 😂
🏍🏍🏍🏍🏍🏍🏍🏍🏍🏍🏍🏍🏍🏍🏍🏍🏍🏍🏍🏍
why bhp it's being measured from the rear wheel?
@obsession_engineering
2 жыл бұрын
Because that's the easiest place to measure it, being as that's where the bike is attached to the dyno
But will it pass noise testing Dave? I.e. less than static @ 102 db?
@obsession_engineering
Жыл бұрын
No idea. Looks nice though 😂
Fame at last!!
Was expecting more bhp if I'm honest considering it's a full stainless steel system. My L7 1000 Road bike currently at 193.78 bhp with lextek headers and msg racing ecu flash
@obsession_engineering
Жыл бұрын
Different dyno, tyre, weather, correction value can all make a difference though
You folks "over the pond" sure are proud of your arrow exhaust. Yosh actually does know how to produce power with gsxr1000, just look at their race record opinion. Put on decent headers and a mid pipe and leave that yosh on there.
@basilrathbone8517
2 жыл бұрын
The American R&D built Yoshi products are nowhere near as nice as the Japanese stuff. Arrow components are far closer in terms of build quality and material weight to the Japanese Yoshi components, and easier to get hold of in the UK.
@obsession_engineering
2 жыл бұрын
Not sure I'd class Arrow as ours, being as I'm not Italian 😁 Having raced with arrow systems for yours and being constantly high quality, they're my go to supplier
Track bike shouldn't have coolant in case of leaks
@obsession_engineering
2 жыл бұрын
On a race bike I'd totally agree. For a trackday bike it is more practical and the chance of leaks is so small it is a good option.
I wanna know if this header will fit my yoshi alpha t 2 slip on? Basically that same silencer you have in this video, does it fit with this exact headers?
@obsession_engineering
Жыл бұрын
Nooo idea! Do you know the diameter of the pipework?
@miamimotogroup5371
Жыл бұрын
@@obsession_engineering diameter is 2.5 inches. Let me know please! I’m literally going to buy it if the diameter fits
@fareedmasoumi373
7 ай бұрын
I’m looking to see if it will fit my yoshiumara shown in the beginning of video