Been using CP since FS19. Learned something new in this video and I am pretty sure I will learn about expert mode stuff.

@Farmer-Sim

9 ай бұрын

Nice one mate! Glad you learned something new! Yeh expert mode will probably be activated in the next episode :)

Very informative, mainly watched to boost the algorithm. 👍👍😎

@Farmer-Sim

9 ай бұрын

Thanks RB, very much appreciate that buddy!

Well done FSG, thanks for taking the time to make this. Im looking forward to the more advanced video's to learn all the features this mod has. I already learned from this one how you run two combines, never could figure that out. Im looking forward to learning how to do correctly...

@Farmer-Sim

Ай бұрын

@@tonycolumbie9589 glad you found the video useful mate! And it does always humble me when people mistakenly call me FSG :)

A genuinely interesting and well made tutorial, even for those of us who can't utilise courseplay. I play on Xbox X so I can only envy those who get access to all these brilliant mods. Maybe one day I will be able to sweet-talk the wife in to getting a gaming PC. Keep up the brilliant vids mate. They are all top notch.

@Farmer-Sim

9 ай бұрын

Thankyou mate! Oh yes keep on with that sweet talkin', you'll get there one day :)

What a great tutorial, i have it downloaded but never used it, really informative and not as scary to use as i thought, and that's thanks to you. Keep up the great work 😁

@Farmer-Sim

9 ай бұрын

Thanks Jay! Really glad you enjoyed it mate! Yeh it's really not as scary as you'd think. And once you've got the hang of it, your productivity on the farm will shoot up! :)

Brilliant video mate! Thank you for putting the time into a video like this…well made,clear and informative! Looking forward to putting this and future tutorials into practise. Keep up the good work buddy 👍 Mrs sim gamer was correct…you are a great teacher 😊

@Farmer-Sim

9 ай бұрын

Thankyou very much buddy! Glad it comes across as you've described :)

@Tyre_man_sam

9 ай бұрын

@@Farmer-Simit certainly does! Looking forward to the next one

Howdy Farmer Sim, i am watching this video.

@Farmer-Sim

9 ай бұрын

hahaha Jay :)

One important thing to remember is that when using courseplay, it may not always recognize all the full widths of the machinery. Sometimes, it only recognizes the width of folded machinery, which can lead to incorrect results. Therefore, it's always best to know the exact width of the machinery you are using and ensure that it's set correctly in the settings. I forgot to do that one time, and it wrapped itself around the nearest tree in the border.

Really great tutorial!! Lucky enough to have you teach me personally, so pleased you are sharing your knowledge

@Farmer-Sim

9 ай бұрын

Thankyou mate! Well if I can give someone even one tip then it’s all good! :)

You did it!! Good show, mate!

@Farmer-Sim

9 ай бұрын

Thanks buddy! :)

@57whitejohn

9 ай бұрын

Been using CP however picked up a couple of tips. Keep up the good work.

@Farmer-Sim

9 ай бұрын

@@57whitejohn hello mate! Thankyou very much! That’s great to know you’ve picked up a couple of tips!

great video, thank you so much.

@Farmer-Sim

5 ай бұрын

You’re very welcome mate glad you found it useful! :)

Thank you so much it is a great video

@Farmer-Sim

9 ай бұрын

Hello Frank! You're very welcome mate, glad you enjoyed the video!

Great video. You can clear vehicle course also from CP's HUD and it's the icon right next to the eye icon and it looks like crossed out circle. Keep up the good work.

@Farmer-Sim

9 ай бұрын

Thankyou Gabriel! Glad you liked the vid! Yes I realised I’d missed that from this video, I mention it in episode 2 :)

great info off to the next one...

@Farmer-Sim

8 ай бұрын

Thankyou mate! So glad you’ve found it useful! :)

"clear current course" at 41.14 m you click the little symbol on the courseplay headsup displayu box tab next to the green eye and that removes, cancels the course also .

@Farmer-Sim

9 ай бұрын

Aah yes of course! (see what I did there lol) Yes I forgot that, thankyou mate, I'll make sure I point that out in the next episode :)

Great first episode in your first tutorial. Unfortunately I'm on Playstation so this is not available to me. Although I did find it interesting and informative on how this mod works. Look forward to your upcoming videos.

@Farmer-Sim

9 ай бұрын

Thankyou mate! Glad you enjoyed the vid! :)

Courseplay likes inside angles, it doesn't really like outside angles. The angle right before the first 90 degree is an example.

@Farmer-Sim

9 ай бұрын

Yes you’re right mate, the outside edge of any implement will always travel a longer distance. With a few tweaks though…

Hey FSG I'm currently trying to use cosplay with the fliegi knife roller and the Great plains 3 p1006 NT with the conservation agricultural mod and it's using the knife roller first and then it's supposed to drop the se edar down but it doesn't drop the cedar down also I'm on zelonka

@Farmer-Sim

4 ай бұрын

Hello John, the first thing I would suggest is that it could be a mod conflict. The Con Ag mod is very new and without knowing too much about it there's a big chance it could be conflicting with CP or vice versa. Try the same thing but without the Con Ag mod and see if it stil behaves the same way. Also I'm Farmer Sim, not FSG :)

@johnphillips2405

4 ай бұрын

@@Farmer-Sim ok thanks, I also follow you both. I'll also try it with a single implement as well

I can't imagen playing without courseplay anymore. What are suggestion for potato and beet harvesters?

@Farmer-Sim

7 ай бұрын

Haha yeh I’m the same, always use CP and AD! Suggestions for potato and beet harvesters? If the field your in has anything at all that those big machines might come into contact with, do as many headlands as possible first m, to give them enough room as possible to turn around during the up n down rows. You may need to adjust the pipe offset in the AD settings for the unloader depending on what kit your using. Increase to move further away/decrease to bring closer. Aside from that buddy I can only wish you good luck, those potato/beet harvesters I’ve always found a bit of a pain….but it is possible nonetheless :)

Are you using graphic settings for this loss way better

@Farmer-Sim

5 ай бұрын

Hello ZBULLET523! No extra graphic enhancements have been used on this one mate, only the LOD distances and terrain distances etc are turned up to 300% in the xml file

Cool video man.. Good job 👍 What map is this please?

@Farmer-Sim

9 ай бұрын

Thankyou Papajay! The map is Alma, Missouri mate :)

@auro_201

9 ай бұрын

@@Farmer-Sim thanks a lot mate

@Farmer-Sim

9 ай бұрын

@@auro_201 you’re very welcome mate :)

I couldn't get it to work for me said "job cannot be started, no permission.".

@Farmer-Sim

9 ай бұрын

Hi Hades1890! I’ll be honest mate that’s a new one to me, I’ve never seen that message before. The only time I’ve known of this game using the word permissions is on multiplayer. Are you on multiplayer/dedicated server?

@hades1890

9 ай бұрын

@@Farmer-Sim Ya I don't think the mods multiplayer friendly.

@Farmer-Sim

9 ай бұрын

@@hades1890 yeh I thought it wasn’t hence my confusion with the permissions term. I googled the message you were getting too and I couldn’t find any other reference to it. I’ve not known of any mod conflicts with courseplay but it might be worth creating a throwaway save with no mods other than courseplay and see if you get the same message?

@hades1890

9 ай бұрын

@@Farmer-Sim Was planning on trying that but even if it doesn't work I'm ok with doing my 100 acres of irregular fields by hand.

Map name?

@Farmer-Sim

3 ай бұрын

The maps Alma, Missouri