The rule on our farm is whoever blocks the combine has to unblock it!! How lovely you have 2able chaps to do it for you 👍 Good luck with your harvest…. we rained off at moment

@WardysWaffleAndrewWard

11 ай бұрын

Rule here is everyone mucks in!!!!

Great update as usual Andrew, impressive JD demo!

I'm amazed at the technology you have available at your fingertips, I use to go over to my uncles farm just out of Bendigo Victoria, he had crop of the year for several years 17 bags to the acre he would cut and bale straw after the header my job was to pick the bales then truck them to Stramit industries at Bendigo I was 15 or 16 then great video thanks 😊

@WardysWaffleAndrewWard

11 ай бұрын

Great memories, I love hearing stories like that. 👍

I walked behind this machine when it was close to the Corn Stores, searching the stubble for unthrashed heads, almost impossible to find any so really impressed with it's gathering capability and header losses. Also, as the straw was so rotten, it was smashed to pieces by the chopper which will make incorporation so much easier.

@WardysWaffleAndrewWard

11 ай бұрын

Did t know you were on here Will!! Great combine though with impressively low losses.

Nice update on combines again, pleasure to watch them working.

Great interesting video as always Andrew and enjoy taking a break to watch every time from over in a still very wet Northern Ireland . Rains each time the combine looks out the shed door

@WardysWaffleAndrewWard

11 ай бұрын

You guys never have an easy harvest.

Thanks for the update Andrew. The John Deere looks a great piece of kit and being able to control the grain cart from the combine is a good idea. Looks like a wet day Monday but good the rest of the week so hopefully you can make good progress. Thanks again.

@WardysWaffleAndrewWard

11 ай бұрын

Wet here now as well as tomorrow. 😖

Brilliant video Andrew really enjoy learning the new tech way of farming from your farm vids and big respect to you for the big efforts you take to share life on your farm .

@WardysWaffleAndrewWard

11 ай бұрын

Thanks Stewart. 😀👍

Thank you Andrew for another cracking video,combines have certainly moved on from when I rode on the back of a Massey Ferguson bagger combine in the late 1950s

@WardysWaffleAndrewWard

11 ай бұрын

Just a bit!

Thanks for showing this Mr Ward, another thing i found interesting although not technology advanced was the steering axle bed trailer which im sure is a good thing on narrow lanes. Hope you can get started combining again this afternoon after this mornings shower.

Saw this in action last year with Albanwise Farming with the JD combine and tractor pulling a chaser bin loading my HGV up at the field side. Very impressive.

Thanks for the vid Andrew. Fantastic insight into the J.D. - amazing the tech nowadays.

Fabulous video, thank you for sharing an insight into what the JD combine can do, very interesting 👍🏼😊

What a great informative video A big thumbs up to you and salesman……. Please keep the great content

@WardysWaffleAndrewWard

11 ай бұрын

Cheers Peter, glad you enjoyed it.

Fantastic video Andrew. Great team effort. Great to see the technology that's going in to farming.

I am a New Holland man through and through, but sadly the John has impressed me. It would be nice to hear your views after you being a farmer who has had New Holland combines for over 40 years.

@Agrovasco

11 ай бұрын

Can only speak on whats happening here in North Spain. Last even we went to they basically made it seem like they heavily focusing on tractors and trying to compete with the best. They came to an area where most people have Deere and Fendt tractors and New Holland combines, and didnt mention anything about their combines aside from field view or yield monitors(which is something crazy to brag about in 2023). So everyone is either going to buy Claas or Deere combines in the future. Also service is kind of.... Id take Deere or Fendt service any and every day

@WardysWaffleAndrewWard

11 ай бұрын

Good combine, tech is amazing but output slightly down compared to our NH which is 60hp more

@michaelcard4598

11 ай бұрын

Wow that was a good video amazing tek in the jd

@nigelgribble8736

11 ай бұрын

​@@WardysWaffleAndrewWardare you having the new version of yours on demo?

@WardysWaffleAndrewWard

11 ай бұрын

We’re not really interested in swapping yet, new house and RX has emptied the mattress!!

Absolutely fascinating, great explanation of modern farming 👍

Interesting video, we are also thinking of going to a john deere combine to replace our Claas 580tt, but can't get a demo, If all goes well we should get the wheat finished by next weekend, let's hope the weather holds for us both

@WardysWaffleAndrewWard

11 ай бұрын

Shied how popular they are becoming. We should be finished wheat by next weekend but depends how much rain we get today. The spring oats barley and beans are a long way off.

Fantastic content all week I've really enjoyed every second of your videos all week,really looking forward to seeing loads more,Thanks so much for putting In so much time and effort especially at this busy time of year

@WardysWaffleAndrewWard

11 ай бұрын

Cheers Ollie. 👍

absolutly brilliant,great view from inside

Think JD are trying to win you great video

@WardysWaffleAndrewWard

11 ай бұрын

😂😂🤦‍♂️

Great video today, and brilliant to see both machines working at the end.

@WardysWaffleAndrewWard

11 ай бұрын

Do you want me to organise a demo for you??

@jacobsallotment8006

11 ай бұрын

@@WardysWaffleAndrewWard yes please!!

@WardysWaffleAndrewWard

11 ай бұрын

😂😂😂👍

Another good update Andrew, the John Deere was very impressive dd like how you could control the trailers. I hope the weather holds so you can all crack on with harvest.

@WardysWaffleAndrewWard

11 ай бұрын

Cheers David, so do we!

Thank you Andrew for another great video 👍🏼

John Deeres technology is second to none its absolutely fantastic my brother has gone to america for a harvest amd we can RDA into his combine from home and see what he is doing. The machine sync is very handy especially when the trailers get full and the drivers can't see into them. Just need a lexion now on demo and you've had the 3 main combine manufacturers. That Case puma sounds mighty impressive!

@WardysWaffleAndrewWard

11 ай бұрын

JD tech is 👌

Really interesting video. Thank you.

Loved to have been there to see this. Technology at its best - awesome 🚜🚜

Great video, thanks for making 👍🏽

Great video Andrew as always. we have an X9 1100 it has machine sync works great on our 6250's , using our 8400 on trailer does'nt work as well we think it could be the different gear box

@WardysWaffleAndrewWard

11 ай бұрын

What a combine!!! 👌😀

What a fantastic video again Andrew a lots moved on since I was farming in the eighties didn’t realise you could block a new combine up we did regularly on the Massey Fergusons and those leverage bars certainly take me back 😊

@WardysWaffleAndrewWard

11 ай бұрын

😂😂

We need more stuff like this. It's spot on. 🙂

Cracking update Andrew as always. It’s fascinating to see the difference in your crop compared to the wheat we’ve been harvesting this week in Cornwall. Ours looks like a crop that’s been left out until mid September not mid August. It’s all gone very black with some gone down. Plus we’re definitely not harvesting at 15% it’s at 18% to 20% here and raining again today. Nice to see the technology working in the John Deere, amazing what they can do. Good luck with the rest of the harvest, hopefully the weather settles now and you can crack on with it 👍

@WardysWaffleAndrewWard

11 ай бұрын

We had around 110 in july

Good video Andrew, great insight and content as always. Hope harvest continues well for you. Probably a week or two before the combines roll in the North and East of Scotland cutting down our spring malting barley.

@WardysWaffleAndrewWard

11 ай бұрын

Our s barley is still 3 weeks away, it was t drilled until April 20th ish.

@wireman_dude1470

11 ай бұрын

@@WardysWaffleAndrewWard some local customers sprayed off last week, so maybe ready week commencing 21st August. Hope all my customer have a good harvest 🤞🏻

You have certainly spoilt us this week with some great videos keep up the great content, Andrew 💯👏👏👍

@WardysWaffleAndrewWard

11 ай бұрын

Thanks Chris

Great video today. Great seeing the John Deere s790. Would be great to see John Deere X9 1100

Having owned a JD combine and class combine John Deere is way ahead on the technology front, but the class is in a different league when it comes to build quality and reliability

@WardysWaffleAndrewWard

11 ай бұрын

Interesting thoughts. I know JD weren’t brilliant 15+ years ago but there’s 2 neighbours have one each for 2 years and get on well. Claas and NH have been fighting it out for the number 1 spot for years.

Fascinating about the J.D.’s but it seems a lot of faff when you already have an operator in the tractor and wouldn’t the combine operator be better off concentrating on what’s feeding into the header rather than controlling the tractor?

@WardysWaffleAndrewWard

11 ай бұрын

The feeding into the combine is done automatically as well. Crop through put is constantly changing depending on the volume going in.

@BTurner.

11 ай бұрын

@@WardysWaffleAndrewWard yes but I was riding in my mates Lexion 650 on Thursday combining osr and he had to sometimes stop and start to avoid blocking it up.

Best of luck with the harvest

@WardysWaffleAndrewWard

11 ай бұрын

👍😀

What a fantastic update andrew, really nice combine, little bit of rain and you block it up !! So you let tom have a go !!! Great technology controlling the grainntrailer, lot of expense for 6 weeks of the year though.

@WardysWaffleAndrewWard

11 ай бұрын

I didn’t want to deprive Tom of having a go!!!! Yes, lots of £££££££££

Brilliant update, great demo, nice wheat and clean fields compared to our organic.

We are on our fourth season running an S series JD with a Flex Draper front and machine sync , having previously run a Lexion 770. Wouldn’t have the output of a new Lexion, but with the Flex front, machine sync and we run a chaser bin it’s pretty good, in field efficiency in the 80% + often. Being able to see all the information on my phone is really useful and aids speedy movement of the combine when the front has to come off. All in all we are really pleased with it and now have everything on Greenstar having also sold our Quadtrac on Trimble 18 months ago. Hope the rest of your harvest goes well.

@lordbonville

11 ай бұрын

What output can the JD manage? I’m guessing the 770 would be 60-80 tonnes in wheat? I noticed the demo machine running at 45tonnes which seems low for a big combine

@WardysWaffleAndrewWard

11 ай бұрын

That’s about what it was doing.

@WardysWaffleAndrewWard

11 ай бұрын

Really useful info, thanks. What did you replace the quad with? We don’t regret swapping ours for the RX.

@alisterfarr14

11 ай бұрын

In 2018 we moved to controlled traffic and replaced the SLD with a Farmet Phantom and started to reduce our cultivation depth. 18 months ago we outed all the equipment to go no till on the entire farm area, which is not without it’s challenges, we farm around Cambridge, neighbouring NIAB and Px on heavy calcium and magnesium dominated land. We replaced the Quad with a JD6250 which pulls an 12mAvatar and Tillso Rake and Roll. Did look at the RX initially but realised we just didn’t need it, great bit of kit though and far more flexible than a Quad. One year in and have got away with it so far!!@@WardysWaffleAndrewWard

@WardysWaffleAndrewWard

11 ай бұрын

Great story, thank you. I know James Peck and what he’s doing!

Thanks for taking the time to create these vlogs Andrew, still think that NH is a lovely combine earning her keep with hardly any depreciation compared to a new one, technology is amazing but sadly I think it's more and more leading to driverless machinery, and personally I don't think you can beat a good operator sat in the seat 🤷🏻‍♂️🤔 daily vlogs this week again hopefully 🤣🤣🤣 hammer down and get that harvest home chaps 🤞🤞🤞😎😎 just a curious question ⁉️ do Ruben and Tom mind being on camera, and would they ever talk about things on camera like yourself? Just be interesting to see a different side of things 👍 brilliant vlog again Andrew Cheers Lee

@WardysWaffleAndrewWard

11 ай бұрын

Thanks Lee. Tom is fine being filmed Reuben a bit more camera shy! Our NH is a very good combine with decent outputs. We had the engine ‘derv doctored’ about 4/5 years ago and put in another 40 hp, Transformed the combine.

Another great video thank you Andrew. I wondered why the JD was doing significantly less tonnes/ hour but then I realised that the header was smaller than that on the NH. The cynic in me says that controlling the tractor from the combine is a gimic but people probably said that about tractors replacing horses and I not a complete Luddite. With tracking of the tractor from the combine there's no stopping off for a pie or a pee when carrying now.

@WardysWaffleAndrewWard

11 ай бұрын

😂😂😂😂 The NH header was smaller, 35’ compared to 40’ on the JD but the NH is 60 hp more!

That's a hell of a difference in yield between a tram line pass Vs no lines. I didn't think it would matter that much tbh but then I'm no a farmer either so..... 🤷🏻‍♂️😂

@WardysWaffleAndrewWard

9 ай бұрын

😂😂Just shows everything which affects our yields.

@crazyjock999

9 ай бұрын

@@WardysWaffleAndrewWard Well I play farming simulator so don't worry I know all about it 😜😂 obviously I'm kidding. Top work as always Wardy 👍🏻

@WardysWaffleAndrewWard

9 ай бұрын

@crazyjock999 👍😀

Cool interesting vid Andrew, what you can do these days with the tech 🤙🤙👍👍

@WardysWaffleAndrewWard

11 ай бұрын

I know, incredible.

Much enjoyed. I remember stuffing an old Claas Matador full of a wet soggy corner - a long time ago. Took me 6 hours to unclog it and I was never as filthy. AI and automation, as impressive and efficient as it is introduces and demands new skills and ultimately could lead to autonomous control of a large part of harvest from the office. Ultimately that efficiency reduces costs, but at what cost.? A reduction in skilled labour and cheaper food placing yet more pressure on Farmers? There seems no doubt that government is only promoting a reduction in arable production through the current financial incentives. A reduction in labour in my humble view is not ideal and manufacturers need to be aware of that. And if Reuben and Tom were not around to assist you while a remote combine blocked up how would that influence your mental health insofar as leaving the office, driving to the remotely operated combine and being unable to share that safely . Autonomous capability is not so far away as we might think just think of military drone and aviation in general. ( Maybe I still have anxiety - I never blocked a combine again though!) The public is being advised subtlety that the drive to feed the nation post war has led to reduced organic material and the decimation of soil health and earthworm activity. I am seeing a disconnect between misinformed public, the sight of ever larger equipment, increasing agricultural deaths and injury and the fact that in a rural area this time of year one is regularly run off the road by 50 to 60 kph, short wearing, young guys often on the phone at 32 tonnes (or more) with perhaps a year or two driving experience. I am not ranting, and one hopes it is the minority but its happening. Like you I suspect I started at 20kph flat out with a 6 / 8 tonne trailer and 78 hp. Now we are talking LGV/ HGV weights and speeds, with no compulsory driver training and that will require intervention at some point. So thanks for using your platform Andrew to show us, mostly the supportive, how it should be done. You show us how farming is a great career to get into these days, and for all you do to support British farming locally and nationally. There is much to be done by the NFU and others but content creators are informing and educating so we are grateful. It would be interesting to show how your entire harvest is used and just how much food and drink and jobs it creates. But not now - you are looking tired. S.

@WardysWaffleAndrewWard

11 ай бұрын

Great message, thank you, so right in everything. Weighting that was not a 2 min job!!

That's a very posh mike you have now, and it sounds perfect, great sound. looks good too.👍👍👍.

@WardysWaffleAndrewWard

11 ай бұрын

Some said I sounded very distorted, others said that’s normal……….

@ebxo269

11 ай бұрын

yes i said it was very loud it was like you were shouting into the mike , i had to turn the volume right down, it was blating, its the footage where you were driving alongside the combine, but in tonight's video it was perfect.@@WardysWaffleAndrewWard

@WardysWaffleAndrewWard

11 ай бұрын

That’s because I’d ditched the external mic!!

Another great update Andrew,. I often wonder what my Father would make of today's tech. When he was on the combine he woulld say, the trailer man should always be in the right place, i shouldn't have to watch him , start at the back of the trailer and work forward 😅. Great piece of kit though Andrew. I can only concur with other comments, that New Holland sometimes appear to be playing catch up. Like yourself i can remember when a John Deere combine was a rarity in the UK.

@WardysWaffleAndrewWard

11 ай бұрын

Mine would say the same if he was here.

Great video Andrew, it’s been a struggle keeping up with you this week, thanks for all the footage and you’re time.. Good to see modern technology in use but having the combine controlling the corn cart tractor is that another step towards the loss of skilled tractor drivers.. you get forage harvesters now that have spout cameras to load a trailer but it will have its place no doubt.. especially with skilled operators becoming harder to come by.. but still impressive to see the ways forward in agriculture though 👍

@WardysWaffleAndrewWard

11 ай бұрын

It’s been a busy week here! I’m with you on loss of skilled operators if we’re not careful

Great video "busy busy". Maybe another green machine on the farm in the future?. As always 👌

@WardysWaffleAndrewWard

11 ай бұрын

Maybe but not immediately!

Good video Andrew, enjoyed that and appreciate you probably didn't feel like making it after a long day. The John Deere is obvious quality, but also liked the explanation regarding how and why you alter the reel on combines and what you are aiming for. Watch quite a few different farming channels but you seem to explain things like that really well 👍

@WardysWaffleAndrewWard

11 ай бұрын

Thank you, pleased you enjoyed it.

Something else you could do is have a much old combine, to show the older machines and the newer working together and progress to to remind people.

The big New Holland "SR" might have your name on it in the future Mr Ward!!👍😉🥳😎🔨👇👊

@WardysWaffleAndrewWard

11 ай бұрын

££££££££££££££££

Thoroughly enjoyed that.

Impressive combine but no where yet to store weed seeds.which better on fuel.crops looking good considering weather

Great video Andrew

Good to have a few demos sharpens the pencil had both but NH and NH wins,I heard there’s a pre production NH wandering around.

@WardysWaffleAndrewWard

11 ай бұрын

There is, near Wragby.

Breathtaking never seen anything like it. Wait till AI really gets going, it’s an awful long way from my father farming in Notts with horses in 1940 followed by 35’s 165 etc thanks for bringing this to us.

@WardysWaffleAndrewWard

11 ай бұрын

😂😂😂😂 Those were the days!

Is that a new JD harvester and tractor for 2024 how technology has moved in just a short time that was a good watch with a morning cuppa

@WardysWaffleAndrewWard

11 ай бұрын

Will have to wait a while!!

fantastic 😊

Brilliant tec which will be the future but it will be less jobs for the working man

@WardysWaffleAndrewWard

11 ай бұрын

That’s the draw back

Like watching the Millenial Farmer working with Wardy! Nice to see the JD - buying it??

@WardysWaffleAndrewWard

11 ай бұрын

😂😂 Not yet!!

What a brilliant video as usual, extremely well explained, some serious state of the art there,.those combined are impressive, especially for an old timer like me who used to cut the harvest with a four foot binder, how times have changed, where would you be without Ruebin and Tom and all the rest of the crew 👍👍👍

@WardysWaffleAndrewWard

11 ай бұрын

I’d be lost!

The technology involved today is so advanced from years ago but what is its reliability and can it be overridden to enable a combine to continue work ( safety features not overridden). My other concern is the field mapping and yields are they secure No third party seeing them and being used in grain futures market exploitation. New J D on order I suspect. Take care stay safe and healthy

@WardysWaffleAndrewWard

11 ай бұрын

Cheers Bob, not on order for a bit yet!

@bobcrawford2105

11 ай бұрын

@@WardysWaffleAndrewWard bet there a 12 month lead time for one

What a cracking update Andrew brilliant, the technology theses days is outstanding isn’t it truely amazing, and it’s amazing to see working, but I must admit I think I would have had a little fun with Reuben while you was watching the screen from Toms pick up and turned the gps off just to see Reubens reaction 😂😂 well worth watching this update brilliant. 😊

@WardysWaffleAndrewWard

11 ай бұрын

That would of been worth it!!😂😂😂😂

@jonstephens682

11 ай бұрын

@@WardysWaffleAndrewWard yes definitely! Bit off a little giggle.

Many Thanks for a great video very interesting ,,and the technology.. ...Question if you have time to answer ..Do you have to keep re sharpening the combine knife ?

@WardysWaffleAndrewWard

11 ай бұрын

They are self sharpening. 👌😀

Some use of Technology

At what cost JD new technology ?, but still rely on last century knife to to cut the crop

Fascinating update. Electronics on combines were in their infancy when I left the industry in 2001, they sure have progressed ???. Hopefully the combine will still run in the event of a blank screen scenario?. The header looked very Mac-don, have JD copied it or is it a Mac-don in green?. Unusual to see every other knife finger missing, surprised it cuts as well as it appears. Finally, an old English proverb "He who blocks the combine, also cleans the b-gg-r out"

@WardysWaffleAndrewWard

11 ай бұрын

😂😂😂😂😂🤦‍♂️

Get the X9 there 🙂

Fantastic video Andrew very interesting content,curious what size header was the john deere combine running?

@WardysWaffleAndrewWard

11 ай бұрын

12m v 10.5 on our NH

A great video Andrew I think you may be sold on The JD.

@WardysWaffleAndrewWard

11 ай бұрын

It’s good but not looking to change just yet.

A good video but a lot of things to go wrong with all the electrical stuff

Malcolm Bendall please dont take this as a criticism I enjoy your your waffles I am impressed with your farming and the the way you and the lads who work for you cope with all the new technology my concern is this I've worked on the land 56 years in 1977the farm I worked on we got 3 ton to the acre with about £10000 of equipment in the field now 40 odd years later your getting 4 ton with what £500,000of equipment I hope the economics work for you

@WardysWaffleAndrewWard

11 ай бұрын

Sorry, is this for Malcolm or me?

Ops center is incredible. Once you get it going you cant use anything else. Trading the CR for an S series maybe????

@WardysWaffleAndrewWard

11 ай бұрын

Not swapping for anything yet!

Great videos, I like you passion for farming and how tidy you always keep your farm. Can you tell me which button you used to adjust the varifeed on the newholland please, I have bought a newholland combine and struggling to find how to move the varifeed on the header. I would look at the manual but don’t have one. Thanks james

@WardysWaffleAndrewWard

11 ай бұрын

You press the button on the back of the joystick and then the left side of the reel button to send it out and the right side to pull it back, (or the other way round!)

@jamesbackhurst5997

11 ай бұрын

@@WardysWaffleAndrewWardThankyou that’s great i will give that a try. If you ever venture up into the Highlands drop me a message and your welcome to pop in for a cuppa. Many thanks for your help and keep up the great videos

@WardysWaffleAndrewWard

11 ай бұрын

Let me know if it works!!

What happens to the crop that was sprayed off? Does it just get mixed in with the rest and won’t have yielded as good as the rest of it? Great video 👍

@WardysWaffleAndrewWard

11 ай бұрын

There’s no wheat in it, just dead straw so gets chopped with the rest.

I believe Case have had controlling the tractor when unloading when on the move for 2 or 3 years, am surprised New Holland havn't had it as basically its the same company.

@WardysWaffleAndrewWard

11 ай бұрын

Not heard of that.

You know what they say ! Their are combine drivers & their are screwdrivers! 😂😂😂😂😂

Cracking video, trading up into a Deere this time ? Or will it prove difficult to leave Newholland

@WardysWaffleAndrewWard

11 ай бұрын

Not swapping it yet!

The longer videos are better👍

@WardysWaffleAndrewWard

11 ай бұрын

There’s a lot don’t agree but thank you.

The crop doesn't seem to be entering the combine just as nice as it was in the newholland

Sorry I am malcolm im72 and computer illiterate my daughter Louisa set it up for me so it is for you hope it stays fine for you

@WardysWaffleAndrewWard

11 ай бұрын

Not a problem. I agree with your comments about yields and cost of machinery. Food has been too cheap for too long, we need more return for the higher costs we have compared to you.

hope you try 9t fendt ideal combine to to compere john deere

@WardysWaffleAndrewWard

11 ай бұрын

Maybe sometime,

@lordbonville

11 ай бұрын

You remember getting all the drills in the field at the same time???

How’s things Andrew, which combine is better to chop and spread the straw? Thanks

@WardysWaffleAndrewWard

11 ай бұрын

About the same.

@paulwilliams3494

11 ай бұрын

I would put the NH ahead by a whisker Andrew, when you don't block it up.😂 I worked for another Lincolnshire farmer, a Mr Scrimshaw. ( Old man Scrimshaw ) He said if you had a gang of workers and something stopped them for ten minutes, one person was ten minutes gone a gang of twelve was two hours!! Big is only better when it is working with machinery too..............your NH is still a good machine. Wheat looking good for the season👍👍@@WardysWaffleAndrewWard

@WardysWaffleAndrewWard

11 ай бұрын

😂😂👍

Hang a teleporter on the bar when they block - that’s the best way out of that how we do it

@WardysWaffleAndrewWard

11 ай бұрын

It very nearly went lots of times but that was our next option.

How can the output be down in the JD compared to the NH? Is that down to the operator or electronics?

@WardysWaffleAndrewWard

11 ай бұрын

Our NH is 60 hp more so that will be the difference. Give the JD 60 hp and I bet it’d beat the NH.

great video andrew so when you geting jd combine

@WardysWaffleAndrewWard

11 ай бұрын

Not looking to change yet!

Would you go Green if a new combine was on the Shopping list Andrew?

@WardysWaffleAndrewWard

11 ай бұрын

Which green???!!!!!

@paulstorer6937

11 ай бұрын

@@WardysWaffleAndrewWard John Deere Green.

@WardysWaffleAndrewWard

11 ай бұрын

🤷‍♂️😀

S790 is handling the 12 meter front ok

@WardysWaffleAndrewWard

11 ай бұрын

It is but a lot slower than our NH handling 35’

@bernardjackson7119

11 ай бұрын

@@WardysWaffleAndrewWard The S790’s here have 18 meter Mid West fronts and harvest 8 ton crops of irrigated barley and wheat. I was just a bit surprised to see are 12 meter front being used in such small areas I don’t know wether JD do are hinged Draper front in 35ft

@WardysWaffleAndrewWard

11 ай бұрын

There’s a lot of 12m + fronts in the UK now and Macdons are getting popular.

Man that JD is crawling even with a draper header. Reminds me of the s780i we demo'd years back. Imagine it in the damp 😂 Stick with what you got if i was you! Or try a lexion

@WardysWaffleAndrewWard

11 ай бұрын

I like the CR so not looking to change just yet!

Did you like the John deer

@WardysWaffleAndrewWard

11 ай бұрын

Yes!

Why do they put wheels on headers now, previously only seen in canada and america years past.???????

@WardysWaffleAndrewWard

11 ай бұрын

I think for stability on uneven ground. With more going to zero till the land isn’t very level.

@roberthiggins6401

11 ай бұрын

Reduces the weight being carried also, other than when raised of course.

Will you be getting CLAAS lexion on Demo as well? say the 7700

@WardysWaffleAndrewWard

11 ай бұрын

I’m not thinking of changing the 9090 just yet but might try one sometime.

@lordbonville

11 ай бұрын

What output can the 9090 do? I’m guessing a chunk more than that particular JD model

@WardysWaffleAndrewWard

11 ай бұрын

45-53 ton/ hour yesterday, the JD topped at arround 48-50 i think.

@Thewiseone837

11 ай бұрын

Was it a 35-feet header on the JD as well.@@WardysWaffleAndrewWard

@WardysWaffleAndrewWard

11 ай бұрын

No, 40’

Are you going to buy it?

@WardysWaffleAndrewWard

11 ай бұрын

Not at the minute but in the future…..

Maybe spend more time operating the combine and less time on gimmicks, might get on better.

@WardysWaffleAndrewWard

11 ай бұрын

????