FAQ: How to get a crisp print
how to get a clean, crisp print? Here are a few things to consider:
1- Paper:
You can get clean prints with many sorts/weights of paper, but thin papers will:
-pick up the details of the block easily
-hold on to the ink on the block better than thicker papers, and are less likely to shift during the printing process.
-------
(see my favourite papers on a previous video in this FAQ playlist)
------
2- Ink:
The block needs to be inked correctly. No under-inking, no over-inking.
------
(see previous video in this FAQ playlist- "what is the correct amount of ink?")
-------
3- Block/paper:
From the moment you drop the paper onto the block, they can't shift around. I always tape the lino block down so it doesn't move during the printing. Again, I use thin papers because they tend to stay in place more than heavier papers.
In addition:
If after all this you still get a print that doesn't look crisp, it could mean that you used too much pressure running it through the press. This will " squash" the block, making the details fuzzy.
If you get a "patchy" print , you probably under-inked some areas. You can carefully lift a part of the paper and re-ink those areas, while still holding the paper in place, as you can see in the video. This works better with larger prints and (again) thin papers.
I hope these little tips are helpful!
Handmade prints available at:
honeythiefprints.etsy.com
Social media:
/ honey_thief_prints
Contact:
honeythiefprints@gmail.com
Other prints (digital or other work) available at:
ko-fi.com/honeythiefprints
Filming/Editing
www.branstonfilms.com/
Music: "Shifting Grain" by MHT
#linocut #printmaking #handmadeart #artprint #artprocess
Пікірлер: 27
Forget the printing...your drawings are magical! 🤩 Subscribed to see more 👍
@honeythiefprints
Жыл бұрын
Thank you so much!
I love how you showed your mistakes. It shows us that mistakes happen, even if you know what your doing.
@honeythiefprints
10 ай бұрын
Oh, there's so many mistakes, I only show a fraction of them! There's a lot of things that can go wrong with printing, or any other technique/medium. I should actually show more! 😁
That masking tape tip is genius!
Ohhhhh thank you so much!!! I have always struggled to make my prints less patchyyy and great tips!
@honeythiefprints
Жыл бұрын
I'm so glad! Thank you for watching!
Beautiful!
@honeythiefprints
10 ай бұрын
Thank you! 😊
Beautiful 🎉❤ love watching and your wonderful intricate designs
Ugh, thank you! I always have issues with spots! ❤🎉
@honeythiefprints
8 ай бұрын
Glad if it helps! Happy printing! 🙌🙂
Thank you kindly 💐💙💜💙
Interesting. My father @JoachimGrafWoodcut usually just cleans the plate if there's paint in non picture areas!
Love it
Hello, Honey Thief Prints! I’ve recently discovered your channel and I am enjoying your videos very much! You works are amazing. Could you please tell me what is the name of the material out of which you carve the prints?
@honeythiefprints
Жыл бұрын
Hi, thank you so much, and I'm sorry for the late reply! it's common grey lino, you can find all the materials I use in the videos' description
Lovely!!
@honeythiefprints
10 ай бұрын
Thank you! 😊❤️
Wish I knew it sooner 😂
Hi! I was wondering if you use linoleum block or do you cut on linoleum flooring? I’ve seen videos of both and wanted to know your preference because your prints are beautiful!
@honeythiefprints
3 ай бұрын
Hi, thank you so much 😊 I use lino blocks from the art supplies shop. I think the brand is called "Forbo", but if you just search for b" battleship grey lino " you'll find it 🙂
First time watching something like this. Where this commanly use? Can I use this in polyester UV filter fabric? And thanks for sharing!
What is the name of this performance that you are sculpting?
Which brand do you use for metallic colours?
Was that a lion turtle?