Is it possible to fix the same mobo that has been turned on without standoffs? My friend broke mine after getting a shot of it and i don't know if it can be fixed.

@MyPlayHouse

8 жыл бұрын

Hi Sorry,, I do not have any idea :-/ keep googling.. and good luck. Thank you for Watching! :-)

Why are you handling boards and CPUs without basic ESD precautions?

Thanks for making this video, Morten. That is a nice CPU. I am sorry that your board was defective. If anyone knows whether or not a socket replacement is possible, it would be Louis Rossman. His KZread channel shows the prospects of his business in Manhattan where he does low-level motherboard repairs. Apple logic boards seem to be a general specialty for him, but he knows what he is talking about. You might be able to find something on his channel that would be helpful in this scenario.

@MyPlayHouse

8 жыл бұрын

Hi +Tyler Barton Yes I did watch LinusTechTips visit him, after his GPU owen fix this christmas,, :-) I might try to start with if i can remove the old socket,, before even buying a new,,, it would be fun to try. Thank you for watching! :-)

Hehe, i fixed mine! I got one online not working, had a short on 5v stb. Was getting 4,5Amps with my voltage injection tool, until short was gone. Saw a little puff of smoke near lock tab at the middle pcie slot. After that short was gone and it booted and post.

@MyPlayHouse

2 жыл бұрын

Hi davidut55 Tht is cool, Thank You very much! glad you liked the video :-) Thank you for watching! :-)

Thank you Morten for a usually superb video. A sort of silly question, are using ECC memory for this mobo? ECC could work in Servers and workstations. Also I had a socket pin problem in CPU 1 of an hp motherboard, needless to say I had to buy a newmotherboard just because of it, isnt that a pitty? CPU2 cant work without CPU1 being placed so no room for maneuvering. But I enjoyed playing with dismantling this server, anyway :)

@MyPlayHouse

6 жыл бұрын

Hi Mamdouh Tawadros Thank You very much! I was not totally sure what RAM it was I had,,, so I just tried it all. Thank you for watching! :-)

Did you check the compatability by any chance

@MyPlayHouse

2 ай бұрын

I forget,, this is really old by now :-/ the board never got to work..

There is a memok button on the board don't know how many people know it u need to press it right after u press the start button the error 55 is very common in Asus boards it can also b die to cpu not seated properly or due to cooler not installed correctly I had the same issue got it working after sometime u could have also tried clear cmos but I think u took apart this board

@MyPlayHouse

5 жыл бұрын

Hi MrPirateking619 Thank You very much! glad you liked the video :-) Thank you for watching! :-)

That 55 error code means no memory installed according to the manual, what a bummer on such a nice motherboard. Hope you can get it working someday :)

@MyPlayHouse

8 жыл бұрын

Hi +Axel Kontio Well maybe,, we will see,, missing pines is a bad one! Thank you for watching! :-)

Have you tried only one stick in different slots and then pressed the little red button? That pin is AV22 with signal SA_CKE0, one of the 4 SDRAM clock-enable signals.

@guganotubo

8 жыл бұрын

I could be confusing myself with another series of motherboards but I think that the little 'reset' button if pressed once or twice without successful post would reset memory configuration into maximum compatibility

@MyPlayHouse

8 жыл бұрын

Hi +Gustavo Ferlizi I did not try that,, but it seemed really dead,, :-/ Thank you for watching! :-)

Hello buddy, you might could change that CPU tray with a reflow hoven setup. Otherwise I don't think it would be possible. And even with the reflow hoven would be pretty damn hard to change. Anyway, great vid ;)

@MyPlayHouse

8 жыл бұрын

Hi +Marcelo Martins Could be fun to try to replace the socket : www.aliexpress.com/item/LGA-1150-CPU-Motherboard-Mainboard-Weld-Socket-PC-DIY/2023267122.html But it is pretty hard,, and chances of success,,next to nothing!! Thank you for watching! :-)

hello just wanted to say Error 55 in Asus motherboards is a common thing usually this error appear due to failed bios setttings/version,if you flash the bios to the default setting it should fix the problem hope it helped :)

@MyPlayHouse

5 жыл бұрын

Hi Idf Matkal Thank You very much! glad you liked the video :-) Thank you for watching! :-)

I think this is not memory fault, it's cpu socket pin fault, it might who link with cpu and memory slots, and system board led showing that RAM not working because hasn't link with it and doesn't signal for ram slot.

@MyPlayHouse

8 жыл бұрын

Hi +Stasys Mačiulis Something is wrong,, It can be so much.... A nice error messages would have done wonders! Thank you for watching! :-)

Nice vid!

@MyPlayHouse

8 жыл бұрын

Hi +W1LL3 | Gaming and More Thanx,, to bad it did not work,, would have been nice. Thank you for watching! :-)

Great video. I wish I could get a $120 USD CPU for free! Anyway I wanted to mention there are a few Xeons that do come equipped with internal graphics at least in the E3 series. In particular I have a hackintosh build with an E3-1246v3 where I use its onboard graphics. Also, with the intel stock heatsink/fan you shouldn't need to turn the knobs from their locked position to attach it to the motherboard. In fact, you want to have it in the locked position so that you hear the affirmative "click" or "snap" of the cooler locking into place when you push down on the knob.

@MyPlayHouse

8 жыл бұрын

Hi +lildigiman I do not know how I came to deserve that fine new CPU, I thought it would be like a $30 one. Thanx for info.. Thank you for watching! :-)

I dont think the lose Pin is the only bad thing about this board it looks like the has a litte bended. Had the same issue with an another mainboard due to a terreble aftermarket coller that bend the MoBo in to a slight curve, and it looks like something similar happend to that board.

@MyPlayHouse

8 жыл бұрын

Hi +deepack087 it's to bad it did not work,, would have been nice. Thank you for watching! :-)

You are going to have to reball a new socket on there. Heat it up, Take it off, clean it up with desoldering wick and install a new socket on. Maybe look into some video tutorials on it. It may not be as hard as you think and you can make a video about it.

@MyPlayHouse

8 жыл бұрын

Hi +Never Locked Out I might try to start with, if i can remove the old socket,, before even buying a new,,, it would be fun to try. Thank you for watching! :-)

there should be a mem reset button you hit to reset on the board i had same issue with mine.

@MyPlayHouse

8 жыл бұрын

Hi +Dustin Marklow I did not try that,, but it seemed really dead,, :-/ Thank you for watching! :-)

@SuperSquart

8 жыл бұрын

My PlayHouse Also if you said that cpu doesnt support on boad video you need to use a graphics card.. will not show video with out one

@RAMMSPECK

8 жыл бұрын

+Dustin Marklow The i3 has an intel HD 4400 as seen in the intel ark ;)

@MyPlayHouse

8 жыл бұрын

HI +Dustin Marklow It does have a on-chip graphics chip part,,, but I shout have tried with a graphics card. Thank you for watching! :-)

@SuperSquart

8 жыл бұрын

+My PlayHouse (Morten Hjorth) Ok. You still should you might get lucky and that pin is for the graphics part 🤓. Put a video card in it might boot!!

Try 1 stick at a time in different slots after straightening pins

@MyPlayHouse

3 ай бұрын

This was a long time ago :-)

@ziafathussain8546

3 ай бұрын

@MyPlayHouse advice for future 😀

The pin you're missing is a VSS according to page 112 on this spec sheet: www.intel.com/content/dam/www/public/us/en/documents/datasheets/4th-gen-core-family-desktop-vol-1-datasheet.pdf You might be able to get away with it if you 'solder' pins b23 and c23 together, as they are both VSS. I'm not sure if it'll work and this is a fix on the CPU, which you may not want to ruin. You could look into placing a little bit of solder next to the B23 pin that connects to the B23 pin, which in turn makes contact with the c23 pad on the CPU. Not sure if it'll work and if my reasoning is right, but worth a try before reflowing a whole new socket right? I hope i got the orientation right, it could be the AV18 and AW18, those should not be connected together

@MyPlayHouse

8 жыл бұрын

Hi +Bart Kuipers Thanx for this good info. Not sure how I shout do that,,, Thank you for watching! :-)

12:06 right page, Unbuffered non-ECC memory, AKA not server memory

@MyPlayHouse

8 жыл бұрын

Hi +Pål Arne Johansen I just tryed all the RAM that would fit in the ddr3 slots. Thank you for watching! :-)

Have you tried to reset CMOS? Maybe the config is just bad (e.g. XMP, ...) Reset CMOS in combination with a memory reset should work fine if the board is not totally broken :)

@psygn0sis

8 жыл бұрын

+Marca Luja Did you even watch the video?

@RAMMSPECK

8 жыл бұрын

+psygn0sis yes I did but I stopped before he said that the Board is broken because of the pin. Sorry :D

@MyPlayHouse

8 жыл бұрын

Hi +Marca Luja Yes when pins start falling out of the socked,, we have a new situation :-/ Thank you for watching! :-)

someone tried to sell me a new motherboard for $40 retailed at 259. so first thing i checked is the socket and sure as shit it had like 20 bent pins. i told him its junk and he got pissy with me, lol! give me the old CPU pins anyday, at least u could carefully bend them back. ive seen people bend those socket pins back with a microscope but dang it looked hard...

@MyPlayHouse

8 жыл бұрын

Hi +Jay Walt Very often the CPU will be like 2-3 times as expensive as the motherboard,, so it's better to trash a motherboard then a CPU.. Thank you for watching! :-)

@jaywalt1311

8 жыл бұрын

+My PlayHouse (Morten Hjorth) Very true unless its an AMD processor but I stopped liking AMD after their shitty quad core 1ghz laptop cpu bullcrap lol!

@MyPlayHouse

8 жыл бұрын

Hi Jay Walt I have some AMD opteron Blade Servers,, but other then that, my last AMD was a 233MHz,, time flies. Thank you for watching! :-)

he is more exited about the fan and the heatsink ... not exited about the i3

@MyPlayHouse

8 жыл бұрын

Hi +jort van dorst Well guess you did not get that joke :-/ Thank you for watching! :-)

Bummer.

@MyPlayHouse

8 жыл бұрын

Hi +Raymond Earle Yes,,, it's to bad it did not work,, would have been nice.Thank you for watching! :-)

hah, too bad. On the other hand broken hardware is so awesome, you can try to repair it without worring to damage it. I remember I tried to take some of the vram from one GPU to another and......well, failed miserably XD wanted to get my radeon 9100 to 128 megs

@MyPlayHouse

8 жыл бұрын

HI +waaluss Good,, then I do not need to try that :-) Thank you for watching! :-)

Interesting video :)

@MyPlayHouse

8 жыл бұрын

Hi +SpasTaz0917 Thanx,, to bad it did not work,, would have been nice. Thank you for watching! :-)

Hi, you can send it to asus and the can change the socket for around 20 dollar. Totaly worth on this board!

@MyPlayHouse

8 жыл бұрын

Hi I do think that service cost a lot more than 20$,,,, Thank you for watching! :-)

@Ian-yy4cz

8 жыл бұрын

I would try contacting them and asking. The motherboard you have is is pretty good!

@MyPlayHouse

8 жыл бұрын

Hi Vengance I think it would be more fun if i try to change it my self.. Thank you for watching! :-)

@Ian-yy4cz

8 жыл бұрын

I don´t think, that you can buy such a socket :)

@MyPlayHouse

8 жыл бұрын

I do :-) www.aliexpress.com/item/FREE-SHIPPING-1150-big-ball-socket-slot-CPU-transposon-LGA1150-socket-CPU-Motherboard-solda-de-soquete/32462793549.html?spm=2114.01010208.3.1.UwtiIO&ws_ab_test=searchweb201556_8,searchweb201602_4_10017_10021_9987_507_10022_10020_10009_10008_10018_10019_101,searchweb201603_1&btsid=1e32bbc0-0230-4c61-882b-36c03347d625 Thank you for watching! :-)

onoes, u put a static bag under a running mobo? also the little book u didn't open shows they are push pins you only turn them to release. www.pcstats.com/articleimages/200801/LGA775install_clip.jpg

@MyPlayHouse

8 жыл бұрын

Hi +88djdmepfdnkjf94 I do not believe that anti static bags are conductiv,,, but I am really not 100% sure.. Thank you for watching! :-)

@bartoszkazmierczak7249

8 жыл бұрын

+My PlayHouse (Morten Hjorth) This is correct. Actually there are a few kinds of antistatic bags. Those silver colored static shielding bags are sometimes called conductive, but they really aren't. They are made of a thin layer of a conductive metal covered with a plastic insulation layer.

@MyPlayHouse

8 жыл бұрын

Hi Bartosz Kaźmierczak Okay,, thanx for info :-) Thank you for watching! :-)

nice video

@MyPlayHouse

8 жыл бұрын

Hi +Cyber ACME Thank you for watching! :-)

i may or may not have used a keyboard for most of my life

@MyPlayHouse

8 жыл бұрын

HI +moo man I do hope you like the video,, and like my "hopefully" fun way to say you have terrible handwriting :-) Could be fun to try to replace the socket : www.aliexpress.com/item/LGA-1150-CPU-Motherboard-Mainboard-Weld-Socket-PC-DIY/2023267122.html But it is pretty hard,, and chances of success,,next to nothing!! Thank you for watching! :-)

@by_themself3844

8 жыл бұрын

+My PlayHouse (Morten Hjorth) no it is fine the real reason why i have bad hand writing it is called dysgraphia and dislexia but i it is the best way i hear of saying it

@MyPlayHouse

8 жыл бұрын

Hi moo man No way,, I am going to be able to say that! :-) A lot of sugestions on what is wrong with the motherboard,,here. Thank you for watching! :-)

nice video :D

@MyPlayHouse

8 жыл бұрын

Hi +Mikat Thanx,, to bad it did not work,, would have been nice. Thank you for watching! :-)

it's a shame, because i got one of them running perfectly for gaming purposes. Maybe if someone can fix it, could be worth it.

@MyPlayHouse

8 жыл бұрын

HI +Henk Kok Yes,, It's to bad. :-/ Thank you for watching! :-)

If you still have the board, I'd like to buy it for my 'collection' and maybe take my crack at repairing it.

@MyPlayHouse

8 жыл бұрын

Hi +martin borovansky I was thinking of trying this myself,, and has been watching videos on how to replace the socket. Thank you for watching! :-)

@martinborovansky5186

8 жыл бұрын

+My PlayHouse (Morten Hjorth) As far as I know, replacing a whole socket is quite difficult even with a proper equipment, which isn't cheap. And even if you managed to find a repair shop, which could do it, the price will be so high, it would be cheaper to buy a new board. IMHO, the board is worthless, unless you want to hang it on a wall as a decoration (I already have 15 boards hanging on there). And if you want to try to repair the board yourself, the only thing you can realistically do, is to try to bend the pins back to where they were with a needle, but the chances are low. Even I only have around 20% success rate with bent pins. Could be a cool video though... (Protip: It's easier to access the socket, if you remove the motherboard heatsink and the CPU retention bracket - the screw size should be a Torx bit, size 20) Great video BTW.

@MyPlayHouse

8 жыл бұрын

Hi martin borovansky I do know that chances of fixing this is next to nothing :-) and very difficult. Let's see if i try it :-) Thank you for watching! :-)

@martinborovansky5186

8 жыл бұрын

+My PlayHouse (Morten Hjorth) I wish you the best of luck with the repair. If it doesn't work out, let me know.

Darn shame, sorry bro.

@MyPlayHouse

8 жыл бұрын

Hi +Dennis Smith Jr. It is not a problem,, I did not pay anything,, it did not work! I made this video,, got a lot of response,, not all that bad! Thank you for watching! :-)

That motherboard can be fixed by replace the socket and it's possible that laptop service center could do it. The best would be infrared solder station of something similar. kzread.info/dash/bejne/pY5pkppsh9nOYaQ.html

@MyPlayHouse

8 жыл бұрын

Hi +Sybreeder Thanx i did not see this video before,,, wonder if it can be done with some home built stuff :-) I might try to start with if i can remove the old socket,, before even buying a new,,, it would be fun to try. Thank you for watching! :-)

@sybreeder86

8 жыл бұрын

I'm afraid that it doesn't as easy as it looks on the video. I'm after training related to exacly that - reballing, reflow etc. And i know that it's very delivate process. I myself have hot air station but it's goot for smd chips not socket - it'd melt it not reball. That's why infrared is necesarry - infrared will touch only solder balls. After that you need to clean board, have right size solder balls and right matrix for socket to put 1150 balls into right places. But..cheapest infrared station is around 1000euro :( So at least for me is way too much even if i like do it for fun :)

Intel fan on AUSU ROG.....thrown it out as far as you can , plz.

@MyPlayHouse

8 жыл бұрын

HI +朱宇喆 Well the Intel FAN is working,, The ASUS ROG is not :-/ Thank you for watching! :-)

@JoshuaNicoll

7 жыл бұрын

Just for that I'm going to install an Intel Stock cooler on my Maximus VIII Formula.

you can sell the board on ebay for probobly $100 or so someone could buy it and replace the entire socket :)

@MyPlayHouse

8 жыл бұрын

HI +newrhea13 Could be fun to try to replace the socket : www.aliexpress.com/item/LGA-1150-CPU-Motherboard-Mainboard-Weld-Socket-PC-DIY/2023267122.html But it is pretty hard,, and chances of success,,next to nothing!! Thank you for watching! :-)

@EndstyleGG

8 жыл бұрын

+My PlayHouse (Morten Hjorth) Buy 4 and try it and record it :D

@MyPlayHouse

8 жыл бұрын

Hi EndstyleGG I'd get two,, I do only ting you get one go at this,,,anyway :-) Thank you for watching! :-)

@newrhea13

8 жыл бұрын

Well considering a programmable heat bench costs +$3000... its kinda an investment...

@MyPlayHouse

8 жыл бұрын

Hi newrhea13 Well no way I would go that way,, I'd see how fare I could get with a heat gun,, if it brakes,, well it is broke,, :-) really nothing to loss :-) I might try to start with if i can remove the old socket,, before even buying a new,,, it would be fun to try. Thank you for watching! :-)

You keep telling us not to touch the pins on the CPU socket so they don't get bent so maybe the moral is if you don't want bent pins is don't touch the pins.

@MyPlayHouse

8 жыл бұрын

Hi +DAVID GREGORY KERR Maybe!! :-) I did not bend these myself.. I got this motherboard because it was fucked.. to try if I could fix it,,,not so much :-( it's to bad it did not work,, would have been nice. Thank you for watching! :-)

wow, am i the only one that gets worried here? you have no connection to the cabinet, thats an accident waiting to happen, statics cause a lot of stuff to stop working, and you might not even note that your component is broken. plz do your self a favor and read up on it.... here is a little about it, but im not sure thats enough information. www.webopedia.com/DidYouKnow/Computer_Science/static.asp also i would recommend using a Anti Static Wrist Straps befor picking up components, especially the CPU (remember to connect it to a grounded unit like a radiator.

@MyPlayHouse

6 жыл бұрын

Hi Knud L Thank You very much! do not do as I do, improve on what I do. Thank you for watching! :-)

This guy is kind of a noob when it comes to computers, but that is ok. We all were at some point. Right off the back dude, that motherboard is a high end so it is pretty new. So you should have known DDr3 and 4 are only acceptable as DDr2 and 1 is old, really old. I am glad you found out there was a broken pin and not waste any more time with it. As far as your question about replacing the socket, that can get expensive like $50-100 to fix if someone does it for you. It involves removing the entire socket and heating it and spreading special compound over the layer underneath the socket. Then putting the new one one. If it was an AMD processor, they are a lot easier as you could just put a piece of metal there and as long as it makes contact you're fine. Intel has put the pins on the board unlike AMD putting them on the processor. I wish Intel would make the pins on the processor instead of the motherboard. Then Intel really would be perfect, xd. Well except for the price... Nice video though.

@MyPlayHouse

8 жыл бұрын

HI I am not a gamer, so I do not care much for this kind of hardware, but I did think it would be fun to try to take out this socket, so I did : kzread.info/dash/bejne/epabtNRwmJDRmdI.html And I am warming up to try to put in a new one,,chances of that working are slim, But hopefully fun to try! :-) Thank you for watching! :-)

@zzzzzz...9902

8 жыл бұрын

Good luck on it. If you do it right without mistakes, it should work.

@MyPlayHouse

8 жыл бұрын

Hi Zzzzzz... That would be awesome :-) Thank you for watching! :-)

@keanankruse

7 жыл бұрын

hes not a noob he is a IT pro and works in a Data Centre!! hes used to computers with dual sockets and motherboards with 18 Dimm slots

@zzzzzz...9902

7 жыл бұрын

Well I meant he is a noob now days and maybe back then he is a pro but technology has changed.

Toss it, not worth the time.

@MyPlayHouse

8 жыл бұрын

Hi +psygn0sis No,, it would be 100%,, "can I do it" I do not need that board,,, I might try to start with if i can remove the old socket,, before even buying a new,,, it would be fun to try. Thank you for watching! :-)

@MyPlayHouse

8 жыл бұрын

Hi +psygn0sis No,, it would be 100%,, "can I do it" I do not need that board,,, I might try to start with if i can remove the old socket,, before even buying a new,,, it would be fun to try. Thank you for watching! :-)

@MyPlayHouse

8 жыл бұрын

Hi +psygn0sis No,, it would be 100%,, "can I do it" I do not need that board,,, I might try to start with if i can remove the old socket,, before even buying a new,,, it would be fun to try. Thank you for watching! :-)

@MyPlayHouse

8 жыл бұрын

Hi +psygn0sis No,, it would be 100%,, "can I do it" I do not need that board,,, I might try to start with if i can remove the old socket,, before even buying a new,,, it would be fun to try. Thank you for watching! :-)

@MyPlayHouse

8 жыл бұрын

Hi +psygn0sis No,, it would be 100%,, "can I do it" I do not need that board,,, I might try to start with if i can remove the old socket,, before even buying a new,,, it would be fun to try. Thank you for watching! :-)

HA! First AGAIN!

@MyPlayHouse

8 жыл бұрын

HI +MrGareth66.com Did you send me the first like to :-? Thank you for watching! :-)

@MyPlayHouse

8 жыл бұрын

Hi +Alex C Thank you for watching! :-)