Thank you so much for your help.

@DillysADV

11 ай бұрын

Glad to be of service

Sir, let me add my thanks to the long list of other grateful folks. One door took me four hours, but I eventually got everything where it belongs. The power door lock works now. I wouldn't have attempted it if it weren't for your video.

@DillysADV

11 ай бұрын

Glad it helped.. always love hearing that someone was able to attack this with confidence.

What made you determine it was the actuator? My front doors will not lock or unlock via power buttons or key fob but will work manually. Already tried a new power switch and didnt fix issue. Is this what i need to look into next?

Question, How do you remove the "other" electrical piece for the latch? It's the little white one on the bottom. I'm replacing the whole latch and the new latch doesn't come with the actuator or the little one on the bottom

Thanks I've done the fronts before slightly different and looked to see how the rear ones worked. Took me about 10min a door appreciate it.

@DillysADV

11 ай бұрын

Glad to be of service

Thanks! Very helpful!

2006 F350 Lariat - instructions where spot on. Did my drivers side rear passenger.👍

@DillysADV

11 ай бұрын

Awesome! glad it helped

Worked perfectly for my 2003 F350, thanks DillsADV!!

Thanks much for this video. You turned what was looking like an all day job into something less than an hour with a break for snacks

Thanks DillysADV. I used your video today to replace my lock actuator and it went great. Much appreciated.

@DillysADV

4 жыл бұрын

Glad it helped out.. thanks for watching!

Thanks for sharing! The mechanism close up pics/video were great and you covered most details necessary for a successful replacement by an average DIYer. I replaced mine today with an OEM Motorcraft unit (part # (SW-6953) or (6L3Z-25218A42-AA) and it looked identical.

@DillysADV

2 жыл бұрын

Glad it helped.. thanks for the part info..

My right rear door, will unlock but not lock. It makes a noise like it's trying to work. Do you think it's the actuator that's bad or something else? 5 years ago wasn't working at all and I replaced it with the same one in your link.

Great video sir, made the actuator replacement easy. keep up the good work.

@DillysADV

2 жыл бұрын

Glad it helped

I also love the teflon dry lube you link to. I've used it on everything from lock tumblers to the refrigerator door. I don't have an F350, but the educational quality of this video is excellent!

@DillysADV

8 жыл бұрын

Thanks!

I perform most work on my '03 F-350 SD 4X2, V10. Great truck! Any videos about any repairs would be appreciated. Rear diff oil change, water pump R&R, radiator R&R, back flushing coolant system, injector R&R, diagnosing general issues with this vintage truck's V10, etc.

@DillysADV

2 жыл бұрын

One day I do plan on getting back to posting. My truck is the 7.3 diesel though.

Thanks for video.Could not of changed my door lock actuator with out it…🤙🤙🤙🤙

@DillysADV

2 жыл бұрын

Glad it helped

Thanks for the video, used it to fix my 01 F350 PSD rear driver side door. You made it look easy.

@DillysADV

2 жыл бұрын

Glad it helped, sorry I made it look easy. the tight spaces do make it tricky.

You got me out of a real pickle! Thanks! Worked, even for my 2011 F250.

@jakeharper6557

3 жыл бұрын

Finally. A video that shows everything. Others skipped over taking off the door handle. While not 💯 the same as my 01 excursion, it game me the important details

@DillysADV

2 жыл бұрын

Glad it helped out.. Hopefully I will get more time to do more detailed videos.

2003 F350 application.!! Thanks for the video. Very helpful, but I eliminated the steps of removing the locking mechanism (3 screws) and outside door handle. With a little bit of effort, I was able to remove the actuator. It took a bit of patience, and several screwdrivers, but it can be done. Appreciated the help.

@DillysADV

6 жыл бұрын

Glad to be of service!

Thanks fixed my 2 rear doors

@DillysADV

4 жыл бұрын

Glad it helped 😊

Do you have a video on an F3 50 lift back door replacing the lock actuator

@DillysADV

2 жыл бұрын

I am guessing you are referring to the SUV version.. no I don't.. Just the truck..

It would been better a closer look on the tab part when you where taking the part out sir thank you for the guidelines

@DillysADV

2 жыл бұрын

I will keep that in mind if I get back in there again.. I know sometimes seeing the details makes all the difference.

I can't pull the bar that goes from the actuator to the inside lock button, the one wrapped in a plastic sleeve

@DillysADV

4 жыл бұрын

I'm trying to remember that one. Are you trying to remove it or just actuate it, Actuate it may be push not pull?

do you have anything on door window failure where roles up and down intermittenly would love to check it out since i have 02 f350 that works sometimes and sometimes not.

@DillysADV

7 жыл бұрын

I don't but, I did have that problem.. It turned out to be the window switch. amzn.to/2us7ks1 they are a little spendy but totally worth it.. test it with a basic multi meter when it is not working by checking the power at the window motor. I do have footage of what when wrong on my failed hard drive so once it is recovered, I'll get it posted and maybe go into detail on how to test.. thanks for coming by.

@kylerenneberg3069

7 жыл бұрын

James Johnson. My 2000 F150 had window issues and I don't think they're much different than the 2000 style Super Duty window motors try smacking it with a wrench or screwdriver in and see if it frees up the window motor

man how did u get that bar off that you just "pull up"? I feel like it's bending and not giving for me.

@DillysADV

7 жыл бұрын

Are you referring to the one that goes to the exterior handle? if so you rotate it until the clip lines up with the gap (it is a little tricky to see) and then it should slide out.. careful about bending it, that may mean that there is a clip that has not released properly. if you need to send me a pic on facebook and I can guide you better.. facebook.com/DILLYSADV

I did exactly this video but now my door will not open. The actuator works correctly but the door will not open now. How do i open the door now, i removed the panel while the door is closed but cqnt figure out how to pop it open.

@DillysADV

6 жыл бұрын

it sounds like one of the rods came out..I would look for that first,

They are the exact same locking actuators as the 2000 F150 and they mount up the same

@DillysADV

7 жыл бұрын

Yea, most automakers try to re-use the same parts across not only different years but also different vehicles altogether. any automaker that does not do this is foolish.. Thanks again for commenting!

Question: My Ford F 250 Crew Cab has a rear door in which the interior handle and my newly installed exterior door handle don't open the door. I need to troubleshoot. The interior door open pull lock doesn't stay put and thus can't open the door. Is it just the actuator? I have power locks and the rears haven't worked in years. Ford says it has a newer actuator but needs to be spiced to existing wires. Your thoughts.

@DillysADV

4 жыл бұрын

I cannot speak to the ones you are dealing with. I will say something sounds off . It may be worth recording a video of what you are working with and send me the link ( I am more visual with how I do repairs)

@patrickwhelan5703

4 жыл бұрын

@@DillysADV With the interior door panel removed, I need to get this door opened. I know that I can remove (from the inside) the 2 nuts for the exterior door handle but how can I get the door opened with that??? When I pull up the door lock tab (on left side of door) it doesn't stay up. What can I do to any of the working parts in the door cavity that can release the lock?? Thanks for the reply....

@DillysADV

4 жыл бұрын

@@patrickwhelan5703 at about 2:54 I show the internal assembly. If you control it from there, you should be able to unlock the door and open it from there assuming that the latch portion stool works. If it is not working I am not sure.

My driver's rear door will not open at all. I got the panel off but how can I open the door to start the repair?

@andrewohanian5132

5 жыл бұрын

Nevermind, figured out that if I yank up on the manual lock and pull the handle at the same time it will open. Window switch works but the actuator isn't making a sound. Ordered the part, thanks for your video!

@andrewohanian5132

5 жыл бұрын

Amazon delivered part the next day, fixed it in 30 mins, thanks again. I guess if another one fails I will just do the rest of them at once.

Is this the same for my 2013? The actuator looks the same

@DillysADV

4 жыл бұрын

I cannot say for sure but it could be. If it is not it would be really similar.

@Rider-nb5ts

4 жыл бұрын

DillysADV thanks. What’s the motor right under the lock tab with springs in it. This is on the other side of the door (right side when the rear door is open) is this for the windows? Sorry I just bought the truck and haven’t owned a for for 10yrs. I Had my LLY Chevy which was Mr. dependable

@DillysADV

4 жыл бұрын

I checked and yes, depending on the model of truck you have the 2013 uses a lot of the same actuators.

@DillysADV

4 жыл бұрын

@@Rider-nb5ts Yes, the motor in the front portion of the door is for the window.

@Rider-nb5ts

4 жыл бұрын

DillysADV thank you on all accounts!!! You’re awesome, subscribed!

Oh and the best part of it all?? REPLACING THE ACTUATOR DID NOTHING TO FIX PROBLEM. All that I managed to accomplish was wasting 20 bucks, breaking plastic clips and making the door be unable to open from the inside now. It will unlock but it won't lock. Exactly the way it was before I made the horrible mistake of trying to do this myself. That was my rear driver door. My passanger front door sometimes unlocks and sometimes it doesn't, I have to press the unlock button 3 times quickly and when I'm lucky the stick moves up far enough to be unlocked, but it doesn't always work. If anybody has any suggestions I'd love to hear them, causing reading "wow this was so easy my grandma was able to do it" comments is really starting to make me rage.

@DillysADV

2 жыл бұрын

Were you ever able to figure out what the problem was?

Why did you remove all of that to take out the Locking actuator? All you have to do is take off the door panel reach your hand back in there disconnect the two locking arms disconnect the wire from the actuator and then you something small like a small flat head to release the actuators locking clip no need to take the door handle off

@DillysADV

7 жыл бұрын

You are possibly very correct.. part of it is to show more of what is being done as well as seeing what I was doing.. 2 nuts to get the handle out was not a biggie.. if you did this for a living.. which ever way is faster or just works for the tech works.. thanks for sharing, now I am going to have to go try it to compare...

@EvangelistFredHiggins

10 ай бұрын

Where's your video?

There's an easier way to remove and replace the actuator - kzread.info/dash/bejne/iIWmj7WblLHOYps.html

@EvangelistFredHiggins

10 ай бұрын

That video shows a front door. The rear door does not have the huge rectangular access hole that the front door has in the metal panel. Not applicable...

If you have a 2001 F250, I implore you, DO NOT TRY TO DO THIS. It is a f******g NIGHTMARE. Every stupid plastic clip, EVERY SINGLE ONE takes 30-40 minutes of prying, painful hand positions, and scraping yourself. Unplugging the plugs takes 25 minutes of jostling and positioning, including probably breaking one of the clips. Whoever designed this should be boiled in oil and have their fat sold for soap. Seriously, just have a shop do it. Your sanity will thank you.

@DillysADV

2 жыл бұрын

They are a bit tricky, especially due to the tight space you have to work in.