You can hear the disappointment that he lost the argument with his wife on how he was going to build the truck.

@tyhust4081

2 жыл бұрын

It’s more of an excuse for not having money to finish an actual build. Putting in an uglier barely newer front end is no build

I’m glad you mentioned that cutting was involved. I wouldn’t have figured that out until it was too late

@quickvance6276

3 жыл бұрын

Doing this conversion now. Literally took 5 minutes to cut both sides and the slots should be about 15 to 20 minutes for the lights. An angle grinder will knock it out and Home Depot rents them cheap also Harbor Freight if you have them in your area. Also the ultimate easy way out borrow one from a friend. My 08 is outdated and needs an engine overhaul or replacement so it's worth it in my scenario.

Thank you sir, some badass rigs, glad to see someone has finished this and did it right, starting to swap my 06 this summer

@Vegas_built

6 жыл бұрын

Brien Mussehl Thanks a lot man if you have any questions just let me know. Shoot me an email with any questions

I have a 04 4wd expedition, since about 010 I've been wanting to lift it and put some of the newer F150 front clip on it. I'm seeing some difference around the A pillar first off And put a solid rear axle.

The gas cap interfered with the fuel door because the 2014 doesn't use a gas cap at all.

@residentevil2928

5 жыл бұрын

I like the cap less configuration better.

@brandoncaldwell95

5 жыл бұрын

@@residentevil2928 Least till ou get water in your fuel. Ive gone through deep water in many vehicles. Of course gutted. Gas caps are best

@limiteddavey2092

5 жыл бұрын

I tried to add fuel to my 2010 the other day because I had a gas can with some in it, and it wouldn’t even open the hole. Needless to say, gas caps for the win. What’s gonna happen if you run out of gas and try to use a gas can?

@GI-rt7ol

5 жыл бұрын

Kr Davey they come with a funnel for that exact reason. If you bought it used and it didn’t come with one I’m sure eBay or amazon will help you out

@brandoncaldwell95

5 жыл бұрын

@@GI-rt7ol Ibe never seen a gas can or vehicle come with a funnel for such reasons. If anything, its the annoying safty switch bullsgit that causes more fuel to be spilled than into the tank. To which is why i drill out the nosel of the new gas cans...

this dude needs a job with chip foose or west coast customs, or some SEMA builder. quality of workmanship is insane

@Vegas_built

5 жыл бұрын

Thanks man I appreciate the complement

@Vegas_built

4 жыл бұрын

Thanks man I appreciate it. I made it in to sema 2019 it was a great experience I built a new diesel for it. Check it out it's on my channel

Gotta love Ford with their menial changes every few model years. Lol

@Montoya1991

4 жыл бұрын

Happens with everything, all brands change body styling every 4-5 years

That core support is magnesium f150 250 350 from 04 to present day. Made Eaton rapids mi.

@murf77donnelly33

5 жыл бұрын

Believe it or not that's core support is called mrs then there was 415 till 2013 14+ is the 552. We sell 17k a week only f150

Just ran into the rear axle swap issue with the discontinued FL3Z-4010-C rear end that came in my 2007. had to end up looking for the e-locked 8.8 out of a 2015 turbo model. Shock mount spacing was identical and the spring perches are non welded to the tubes. Not a single salvage yard in 3 states had a single 99 or newer 150. Was a bit of a pain in the ass.

that's a very interesting video, but you already had a very good looking one to begin with, imo

Love to have this guy and his car lot as a neighbor

@woodencoins808

5 жыл бұрын

youre damn right i love having a car lot

Cool! Nice work!

This is dope bro. Nice job

Damn so if someone wanted to they could buy a crashed f150 and just put newer parts on it. That’s crazy

@TheOneFu33

5 жыл бұрын

How do you think small mom and pops dealers get their cars?

nice job.....i will be considering doing this to my 05 FX4 👍🏻🔧🔩🛠

Looks like a lot less work than I would have thought looks good

Cool project!

You should have done a raptor conversion. That way you keep with the wide body off road look you did on the old body.

Ford doesn't use separate turn/brake lights on those tail lights. Both bulbs are the brake/turn signals like my 2013

Both top and bottom are brake and turn on the new lights.

Can't swap the front doors though lol the 10 up body is nearly 8inches larger than the 04 to 07 and once you notice it they look tiny so you can't do a complete swap with door panels unless it's extened cab those didn't change size

Could you also use the raptor fenders and bed for this conversion I believe the 2010 raptor is built up from the 05-09 body. I'm planning on doing this conversion but if I can use the raptor style then I'll go for it as I love the look of them.

I need more detail on the front fender to headlight brackets! Thank you for your service!

@quickvance6276

3 жыл бұрын

Hey Andy, did you get this figured out yet? I'm doing the conversion on mine now have an 08. Thanks!

Hey not sure if your responding 3 years later 😂. What size grade a bolts did you use? Working on this conversion now thanks so much for posting this video!

This is a great video man! Im getting a 05 F150 then I want to do the gen 1 raptor conversion with the fiberwerx front kit. Did you have to modify anything on the new bed? I think it might be easier to get a new style one then to try messing with the original haha.

@quickvance6276

3 жыл бұрын

Hey Raymond, did you have any luck with getting the 05 and doing this conversion? If so do you mind sharing details? Doing this now on an 08. Thanks!

You should've gotten raptor fenders and grille

@tacoengineer6660

5 жыл бұрын

Nah only real raptors can have them

@woodencoins808

5 жыл бұрын

@@tacoengineer6660 false

@champagne6534

5 жыл бұрын

Nah thats some ricer shit and looks retarded on non raptor models

@tacoengineer6660

5 жыл бұрын

@@woodencoins808 It's not false, because that's ricer!!

@BRado

5 жыл бұрын

those are so overplayed now

Did i hear u say 2014 conversion with long travel? The wife would love it 😂

Nice conversion

Good information brother thanks

Great job I’m going to be doing this alao

Shout out from nlv man.

I wonder if you the bumper of 2004 fit on 2010 I like the big fog lights

I like !

Great video

How u mount the bumper to the 05 frame? What modifications u had to do?

Awesome 😀 😀 2014 Ford F-150 review .

I’m wanting to do even newer. 2015-2016 front and rear congestion to my 2007. Trying to find info on it with no luck. Anyone reading this know if it’ll swap over or so I need to pull out the sawzall and mug welder?

On the tail light the hole light is the turn signal

Good work

They need one for the current gen style

Nice,cool

I'm waiting for someone to do a 15-20 conversion on an 09-14. Any idea if anyone has done it and took videos or picture like you?

Sick

Hey man i need some info. How hard would it be to get the dash/body harness/ climate controls and everything from 12th gen f150 into and 11th gen 07 4.6 rwd supercab. I want the sat nav unit from kayhan and they only have them for the 12th gen and i want to keep my truck like you its paid off and runs strong just want digital climate and all other options with 12th gen dash. Sorry for the long post but what really appreciate if you or anyone else on the comments could help me out and thank you ahead of time.

Will this conversation work on a 2005 Ford F-150?

Gas cap is hitting because the ‘14 has a cap less system. You could get a filler neck out of a ‘13 or ‘14 and you’d be good to go.

This looks like the 29 palms military housing

For that reason I’m not getting married 😂

@conspiracyscholor7866

5 жыл бұрын

It was a pretty nice truck to begin with..

also, ur really experienced man, how do u feel about the safety of running spacers?

@Vegas_built

5 жыл бұрын

Dont really like it but the truck is light and we didnt tow with it and I went with a good brand. I never had a issue with it

Hey everyone. I just posted part 2 of the f150 conversion go check it out.

@llamasfrancisco

5 жыл бұрын

I was looking for it at the description so must people will do the same. So it will be a good idea to add the link in the description of this video. Well done

@stevenastle3322

5 жыл бұрын

I am going to use the 09 to 14 radiator core support with mine Do u know if this will work.Thanks

@wingedsaviour7327

5 жыл бұрын

Sweet was hoping there was a part two, very cool concept bud.

keeping up with the Jones'

Nice work

nice job

What’s wheel and tire set up

Or do you have any left over 04-08 parts for sale?

Get a capless gas filler, cool job.

Do a 10 speed and gen 3 5.0 swap of a 2018 f150

Do you still have the prerunner fenders and looking to sell?

Any one knows if the seats fit bolt on? Or need a special brackets?

Can a 2015 f150 front end go on a 2013

2011 up ditched gas caps.

That’s badass! Is the 2010 bed the same as a 2014? And what size bed would fit a 2008 extended cab?

@1982MCI

5 жыл бұрын

Chepo Aguirre if your asking these questions then you need to find a shop to do the work for you buddy. It’s not a hard conversion at all but you do need a little bit of common sense about trucks and have basic mechanical ability or your gonna fuc yourself up real good and then you’ll get frustrated and sell it on Craigslist to some kid that doesn’t know any better and you’ll end up fucn him and it just ain’t right, seen it happen a hundred times man

@luisforeal8676

2 жыл бұрын

The cab size doesn't matter... The beds to my knowledge from 04-14 come in 5.5ft, 6.5ft and 7ft lengths I believe... you can't take a 5.5ft bed off a 2014 and put it on a 2004 that originally had a 6.5ft or 7ft bed. It wouldn't work.

How much did you spend for the entire kit?

Ive thought about swapping the 2015 fenders on an 05

@Vegas_built

6 жыл бұрын

WARD5KUSTOMZ not sure if you can do a 15 on this body. Dont think the lines match up

@Vegas_built

6 жыл бұрын

WARD5KUSTOMZ if you do it pls share I'd love to see it

What lift you got?

Sucks you didnt prerunner it. But still awsome conversion! The prerunner bed still available?

@Vegas_built

6 жыл бұрын

Mario I have the bed sides and front fenders

Hey dope video i have a question what's the name of the fenders on the bed and front of the truck

@Vegas_built

4 жыл бұрын

McNeil racing

What was the cost for all of this

Can you steady the camera a bit please? I'm getting dizzy

Both of the tail lights are turn and stop

What wheels are those ?

What's the rims an tires??

How much did it cost

What year is the truck .?

Never seen a chin strap for a ball cap....interesting appearance.

How did you install the bumper? If I left the top bumper insert on my 2007 alone could I fab up something to replace the chrome bumper underneath with a 2009-2014?

@kylependergrass3866

6 жыл бұрын

Did you trim the stock mounting plates from the older en or did you buy on a from the new gen and fab those on?

@Vegas_built

6 жыл бұрын

I used the whole piece the plastic and the metal bumper off of a 2014 don't think you can use the old plastic I used the same bumper mounts off of the 05 and made extended brackets with longer bolts to hold it in place

Where the original 05 head lights factory

Anybody know if you can put the 09-14 model bed on the 97-03 generation?

@Vegas_built

4 жыл бұрын

I'm sure it mite bolt up but its going to look off nothing would match the cab

Question is it possible to convert the fenders cab and bed of a2004 F150 to a 2015?

@Vegas_built

5 жыл бұрын

No I think the body is way different

The 2014 doesnt have a gas cap u just open and pump

The ears the hat the beard

Have the diesel brothers/sparks motors do this for you. That is if u live in Texas (or whatever state sparks motors is in).

Kyle is that you

hello i have a question the fenders from the 09 it was from another 4 dr or it wont matter if is 2 door

@Vegas_built

6 жыл бұрын

Daniel Villanueva don't think it matters I got them from a extended cab

@leon303015

6 жыл бұрын

702 diesellivin ohhh nice so u dint change the radiador support u use the same

@Vegas_built

6 жыл бұрын

Daniel Villanueva I didn't change it used the stock one

Nice do you have the 2nd part video

@Vegas_built

6 жыл бұрын

ipchilo yes will be posting one in a few days

@ipchilo

6 жыл бұрын

702 diesellivin i will be waiting for the video i want to do the conversion to my 2004 very good explaining thanks

Do you have a finished video????

@Vegas_built

3 жыл бұрын

look for part 2 in my videos

Did you just buy 2014 parts and put them on or did you get a conversion kit?

@Vegas_built

4 жыл бұрын

No conversion kit most of it bolts on

Can i pay you to do my conversion?

That'll be interesting when you go to sell it.

@Vegas_built

5 жыл бұрын

Sold no problem had around 5k including the truck and sold for 13k so made money on it

why he got one side red and one side white? lol

Where do I buy the "widebody" fenders

@Vegas_built

4 жыл бұрын

McNeil racing sell the kids i sold everything awhile ago

Why??

1:27 "THA FUCK?!?!?"

How did the conversion cost total

@Vegas_built

6 жыл бұрын

pbcsmom28 check out part 2 I spent around 600 on parts

White trippie red

Did you haft to change your radiator core support?

@quickvance6276

3 жыл бұрын

No some people do to provide a mount for the lights. Part of the light goes into the fender and then there's 2 tabs. This guy however simply made brackets that serves the same purpose. Way less money.

@youngblackandflyharleyride2707

3 жыл бұрын

@@quickvance6276 thank you for the information.

How much for the front end parts?

@Vegas_built

6 жыл бұрын

udunome I got a deal i.found the whole front clip in California for 400 bucks

Fenders still for sale by chance?

@Vegas_built

6 жыл бұрын

Jacob Thompson the front ones are

Did the 09 hood hinges solve the problem?

@Vegas_built

Жыл бұрын

Yea use the newer hinges.

@Vegas_built

Жыл бұрын

Check out the updated video of the build.

The 09-14 hood hinges did work?

@Vegas_built

Жыл бұрын

Yes they did

@Vegas_built

Жыл бұрын

I posted an updated video on the completed build