Thanks for the video! With the help of my brother-in-law, this 67 year old man just installed a 6” lift just like the one you installed. Great tip about the leaf springs on the rear. Only took us 3.5 hours. Very good information!!

@TimothysTractors

17 күн бұрын

Thanks so much!

This video is going to come in super handy when my gear arrives! Thanks!

Good job! Very simple and the camera was always on the job, without music or excessive talking. I enjoyed it!!

Ignore all these people and their fancy tools. Not all of us have the means to hire someone to do jobs like this and we don’t have the means for that fancy smancy stuff. You did a great job! My kind of mechanicing. Video was very helpful.

@TimothysTractors

8 ай бұрын

Glad it was helpful. Thanks!

Very helpful video. From no knowledge to full knowledge of the process in one practical video. Thanks much

@TimothysTractors

Жыл бұрын

Thanks! Glad it was helpful!

Thank you. Hard to find honest fixes! Feeling more prepared!

This video helped out more than any other video I found! Very helpful! Thank you!

@TimothysTractors

5 ай бұрын

Thanks so much!

Excellent job and please post more projects that have your interest because many others share the same interest... You did more than lift your cart, you lifted the confidence for others to lift their cart too. That's a three point fact. Best of luck. Brian

@TimothysTractors

4 ай бұрын

Thanks a lot Brian, and thank you for watching my channel!

Happy that this video came across my feed. You phenomenal job with description and explaining along the way of the process. You helped me decide on the kit i am going to get. You have a new subscriber and keep making the videos. Thank you for making this video.

@TimothysTractors

11 ай бұрын

Glad it was helpful! Thanks for watching and subscribing!

Only thing I would add is, since you already have it apart replace the bushings and shocks depending on age! Great video

@TimothysTractors

Жыл бұрын

The shocks look good - possibly replaced in the past. The bushings are pretty much gone. I have new ones and will hopefully get around to installing them soon with a video to follow. Thanks for watching!

I'm just about to put on this same kit! Great video man was very helpful 👍

@TimothysTractors

5 ай бұрын

Glad I could help! Thanks for watching!

Great job! Definitely feel prepared to go do my lift on my ezgo tomorrow

@TimothysTractors

2 ай бұрын

Thanks! Let me know how it goes

Great job young man. Helped me out.

Thank you very much brother. I got the front done last week thanks to you. Just revisited now because I'm about to go do the rear. You have saved me a lot of time and probably money.

@TimothysTractors

Жыл бұрын

Thanks man! Glad I could help!

great video..i was kinda scared at trying this..but now i know i can do it..thank you..

I want more golf cart videos!!!! There very helpful and I enjoy them!!

@TimothysTractors

Жыл бұрын

Thanks! I post new ones frequently so stick around and subscribe to be notified!

Good video. Very informative. Thanks!

Nice video. Thanks for sharing.

Great instructional video and not a step missing. 👍👍

@TimothysTractors

3 ай бұрын

Thanks a lot!

Awesome video…you go straight for the meat of the job. I feel confident doing my 2006 TXTE now. Thanks for the help! Looking forward to seeing the big tires on yours.

@TimothysTractors

3 ай бұрын

Thanks for watching! Glad it was helpful

@TimothysTractors

3 ай бұрын

I don’t have any updated videos with the large tires but you can see them briefly in this video kzread.info/dash/bejne/X6KWyNN7qc-nhKg.html

Great job ..now u can tackle this myself thank u

Great job man. Well done

@TimothysTractors

Жыл бұрын

Thanks!

Great video! Keep them coming!

@TimothysTractors

5 ай бұрын

Thanks! I try to post videos on golf carts and tractors whenever I can. If you subscribe you should be notified when I upload. Thanks for watching!

Great video, mate. Really enjoying your content 👍🏻

@TimothysTractors

2 ай бұрын

Thanks! That means a lot!

Did a great job man. Thanks!

@TimothysTractors

4 ай бұрын

Glad it was helpful. Thanks for watching!

I love it thanks willbe doing same things

Awesome. Thanks for the video!!!

Very good video Very informative, good tips to know before getting started on mine. Will save me some frustration

@TimothysTractors

Жыл бұрын

Glad to hear that. Thanks for watching!

Great video, thanks!

Nice job

Nice job.

Great video.

Thanks very helpful

Well done!

@TimothysTractors

Жыл бұрын

Thanks!

Good 👍 video pal

Well done! I'm new to golf carts and wanted to commend you on an excellent how-to video. As well would like to ask about the cart in the video. Is that engine/drivetrain setup factory or something you installed? I'm currently working on installation of a gas engine setup, replacing the factory electric setup on a late 90's model EZGO and if you could do a walk through of yours, that'd be great. New subscriber, keep up the good work.

@TimothysTractors

17 күн бұрын

Thanks for watching and subscribing! I sold the cart so I can’t take a walk around video unfortunately but I remember just about everything I did to it. It was originally electric and I converted it to gas using a Duromax engine and a torque converter kit with a much larger sprocket than what comes with the kit. I used a 40 chain with a chain tensioner made by monster craftsman. At the time those could be bought on eBay. I used the old electric motor but cut off the armature and had just the shaft with a sprocket welded to the shaft for the chain. That was probably the hardest part other than getting everything lined up perfectly. Let me know any other questions!

@SurlyMechanicTX

17 күн бұрын

@@TimothysTractors excellent. Thank you very much.

Have same car will do same things thanks a lot

Couldn’t help but think of Adam Sandler in Water boy the video “ foose ball is the devil “

Great video. Just ordered this kit today. Question: you flipped the U bolts over when you installed the lifting blocks. Did the instructions say to do that? Or is that something you recommend?

@TimothysTractors

11 ай бұрын

Thanks! I think I just did that to make it easier to tighten the nuts since they'd be easier to get to on the top.

@MoesSmokeStackGrill

11 ай бұрын

@@TimothysTractors makes sense. Thank you.

I work with computers and have little experience working on things like this. I was wondering if any type of grease should be going on to these bolts when reinstalling and also would it make sense to replace those small rubber bushings since you already have everything off?

@TimothysTractors

2 ай бұрын

I put grease on the bolts that were used with bushings and would move, but not on anything else that was just part of assembly. The bushings can be a pain to replace, but yes, it may have been easier to just go ahead and do it while I had it somewhat taken apart. Recently, I’ve discovered it is easiest to replace all the bushings front and back when the cart is flipped on its side

Mike Tyson making lifts

Great video !👍Leave like that, it looks GANSTER !!!😁LOL

@TimothysTractors

Жыл бұрын

Haha. I already put large off road tires on it and it looks much better. Thanks for watching!

Could you send me the kit description. And where to get it. Good video

@TimothysTractors

5 ай бұрын

This is the kit I bought for 1994.5-2001.5 ezgo txt carts www.ebay.com/itm/322660473082?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=rw3dYNkSSZq&sssrc=4429486&ssuid=KVfEPb4LQhK&var=&widget_ver=artemis&media=COPY

Great job on the video. Do you have a link to the kit you purchased from Amazon?

@TimothysTractors

9 ай бұрын

Thanks! It’s come down by $20 on eBay. I can’t believe how cheap it’s gotten www.ebay.com/itm/322660473082?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=rw3dYNkSSZq&sssrc=4429486&ssuid=KVfEPb4LQhK&var=&widget_ver=artemis&media=COPY a.co/d/fV3FtkO

@btsue5606

8 ай бұрын

Is this an electric cart you’re lifting? I have a gas cart and wondered if this kit will work for me. Informative video

@TimothysTractors

8 ай бұрын

@@btsue5606 Yes, it was an electric frame. I did convert it to a gas cart but didn't modify the frame any so I used a kit for an electric cart. Not sure what the difference is if there is any but none of the listings say gas AND electric.

Gangster !

Good job overall but please use a torque wrench with the suspension bolts and not rely on a small impact and by all means,,,Lose the vise grips 😂. All of those steering and suspension bolts have a specified torque rating in the tech manual.

What size wheels did you go with on this 6" lift kit? TIA

@TimothysTractors

Жыл бұрын

I went with these. Can’t beat them for the price. www.ebay.com/itm/274976616865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=MyKyKUwQQuu&sssrc=2349624&ssuid=KVfEPb4LQhK&var=&widget_ver=artemis&media=COPY

@kaptkrunchfpv

Жыл бұрын

@@TimothysTractors WOW! How the heck is a whole set of tires and wheels so cheap! 150 bucks! Thats insane, how do you like the set?

@TimothysTractors

Жыл бұрын

We have a few sets and have been happy with them so far. They’ve held up great so far and I like how they look. Definitely what I will keep using if I lift more carts. Great deal for sure

I have a Jake's on my ez go....ots horrible. Such a bumpy ride. How do you soften up the suspension on one of these dogs?

@TimothysTractors

Жыл бұрын

Hmm. I would probably start by making sure your tires aren’t overinflated. That can make a really bumpy ride. Sometimes on a lifted cart I’ll leave the tires a little low purposely for a better ride. If that doesn’t help, maybe your shocks are worn out?

@mrpush2532

Жыл бұрын

@@TimothysTractors yes I drive w them low already....doesn't help. Cart has little hours on it so wouldn't suspect bad shocks but will have to test them I guess. Thx

@TimothysTractors

Жыл бұрын

That’s strange. Haven’t had that issue before. Let me know what you figure out!

Nice job on video , may I suggest you get some wrenches lol. 😂 …. And I’m also guilty on vise grips for one tool does all.

Any chance you have the kit you ordered information

@TimothysTractors

Жыл бұрын

Yes, here is the exact kit I installed only it's gotten cheaper in price! www.ebay.com/itm/322660473082

@bolstonty

10 ай бұрын

How do you like the kit overall

how long did the lift take completely?

@TimothysTractors

10 ай бұрын

The whole thing would probably take around 3 hours straight through

What year is this cart? Thanks!

@TimothysTractors

4 ай бұрын

I believe 1994

What year is this?

@TimothysTractors

3 ай бұрын

Pretty sure it’s a 1994

How long did this take

@TimothysTractors

7 ай бұрын

A couple hours maybe 2-3 if it’s your first time. It took me a little longer than necessary since I was recording as well.

@erikbuckholz918

7 ай бұрын

@@TimothysTractors thanks. Not too bad. Great video. Thank you. I’ll be watching and rewinding through it when I work on the cart this weekend. Merry Christmas

How to contact you, sir? Maybe we can cooperate some videos.😄

@TimothysTractors

Жыл бұрын

Send me an email at bytesize04@gmail.com

@10l0l8

Жыл бұрын

@@TimothysTractors got it~

Good job man👍 look here too interesting @K.A.V