I will pay for the withdrawn complaint

Looks like I’ve got the same loader, haven’t been able to find a model number on it but it’s definitely an Ezee-On. Where did you buy your replacement seals from? Mind sharing a link ?

@joe_preston

6 ай бұрын

Craig, I pieced mine together. Dust seal: amzn.to/4ar4GYh Cup seals www.mcmaster.com/9411K18 Rod Seal www.mcmaster.com/9514K187 Mine has a 2.5" bore and 1.5" Rod.

If possible could you make a video of removing and installing the loader. Doesn't seam to EZEE to me. :)

@joe_preston

Ай бұрын

I Sold that tractor last weekend or I would. 1. undo the latches at back of each side. 2. Put bucket on the ground and back up. 3. when the tabs hit the front mounts you (lift) the bucket cylinders kicking the frame down as seen. 4. Unhook the hoses and drive away.

Do you know what model this loader is. We have an Ezee on model 60. Wondering if these same parts would work on that.

@joe_preston

Ай бұрын

This is an Ezee on 80-90 If the cylinder diameters measure the same then, yes.

I have the same loader, any idea what the lift capacity should be?

@joe_preston

11 ай бұрын

I would say 3500Lbs at full height I have only had about 2500 on that one but it was not struggling.