Ah you made a front wheel from a rear wheel! Great idea

@oakzy3647

24 күн бұрын

He’s tuning it

@user-gy1ej9tq7h

20 күн бұрын

可以翻译吗

@cora777x

17 күн бұрын

😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

@marcelodonascimento920

15 күн бұрын

❤❤❤❤❤❤

@almudhorry2029

15 күн бұрын

​@@user-gy1ej9tq7hah kau membuat roda belakang menjadi roda depan.

Chilling under the ramp at a skatepark while its raining is a vibe

@chriscarr1787

14 күн бұрын

Or not well😢😢😢😢😢😢😢😢

@Christopher-ko9op

13 күн бұрын

Yeah it is. The rain, the wind, the cold but you're in a little pocket of shelter. The feel of the cold steel, the sound. I can imagine it.

@reeNeey_

12 күн бұрын

@@Christopher-ko9opperfectly described. While reading this, I was sent back to the very old skating days ❤️

@goodhouse91021

11 күн бұрын

And probably sitting in piss 😅😅

@Christopher-ko9op

11 күн бұрын

@@goodhouse91021 lol don't ruin it!

Bro reinvented the wheel.

@bradleyhorn4249

9 күн бұрын

Underrated comment

@patrickmcgillicuddy9227

7 күн бұрын

Damn I thought the same kudos

@CruisinCaprice

7 күн бұрын

Retuned the wheel more like it

@user-hc9sk3mg1h

6 күн бұрын

A shit vibe 😂

@Headtoppaman1989

6 күн бұрын

Not really... wheel builds are a pretty common thing...

I was feeling like I was dumb, but then I saw this short and it made me feel better.

@David27mk

5 күн бұрын

very good 😂

@ninjamigs1766

4 күн бұрын

😅

@mirza6399

4 күн бұрын

why ??

@taylortorres3769

2 күн бұрын

@@mirza6399 because he turned a back wheel into a front wheel

@jeffkrantz9916

Күн бұрын

😁💯👍😆

Yeah that alignment was accurate as hell😂

“Mum that strange man’s under the ramps again”

@T77BMX

13 күн бұрын

Hahaha 🤣

@eliteculture1519

9 күн бұрын

Keeps the park cleared though 😂😂

The patience you have to have to to true a wheel is insane.

@user-zr4un6tk8b

10 күн бұрын

Yes I am a dirt bike rider and grew up working on them. One job I will never ever do again is respoking a rim. Fk that I just buy new rims when I need them

@immabadelmo4969

10 күн бұрын

Used to work in a small town hardware store shop that did a little bit of everything, this was one of, if not my least favorite things we'd fix lmao. Soooo time consuming

@richardlea818

10 күн бұрын

We used to just use the brake pads to gauge them. I think it took me around 3 hours to lace and tru a wheel

@CapUnlimited

9 күн бұрын

I was thinking the same thing

@bmxrider71

8 күн бұрын

I actually love building wheels. Best I've done is on my Hyper and i built both in about an hour and a half start to finish.

Гений. Ломал заднее, устанавливает переднее.

@T77BMX

14 күн бұрын

Yes! We needed a front wheel and this rear Rim was in perfectly good condition, so we recycled it! ♻️

I can't lace a.rim in my house let alone ina park in the rain with wrong tools😂

@user-jr1ki4ee7q

13 күн бұрын

I was gonna say very, very good, although I’m just gonna keep it positive very good very good content very good content you Musta had a good father or a good guardian to show you some stuff about mechanical

@conorharford5117

13 күн бұрын

Me too. i have one sitting in my front room for months

@Eddi3xBac0n

13 күн бұрын

trial and error. practice makes perfect

@user-dd2yz3yu2q

12 күн бұрын

This and 10 speeds is the worst of bike building

@tonberdy9806

12 күн бұрын

@@conorharford5117pppp😊ppp😊pp😊pppppppppppppppppppppp😊ppppppp😊p😊😊pppppppppppppp

Only a real rider can do this. Back in the day we’d take our bikes apart every morning and tune everything up. Awesome 🤘

@fotis3v480

8 күн бұрын

Yeh you tune your sit heights.😂 It's a bmx about the only things changing is seat height and tire pressure.

@69TheSuperbad

7 күн бұрын

​@@fotis3v480 get fuckin' rekt. You just got boomersplained to. Love you both, much love and respect. Hopefully you both can resolve your differences respectfully.

@taylortorres3769

2 күн бұрын

He literally turned a back wheel into a front wheel. He’s got 2 front wheels now

This the kinda sheet I been doing my whole life man 😂😂😂 I appreciate this video 😂🤙

When u feel dumb, just remember this guy exists

@CXVI2

20 күн бұрын

try doing this urself bucko

@Text-SpeechStories

19 күн бұрын

Look at the caption first

@yikes6969

15 күн бұрын

Useless comment

@Hiz_FF

15 күн бұрын

Yeah when I feel dumb I'll just remember you.

@LoneWolfHustle

15 күн бұрын

😂😂😂😂

Наши руки не для скуки, Работа, ради работы. Продолжаем в том же духе.

@T77BMX

13 күн бұрын

We made a NEW front wheel for someone to ride down the skatepark! Glad you enjoyed the content

@bawz1773

10 күн бұрын

qeq

@gangnygny4535

7 күн бұрын

ему бы в армию бордюры красить

chops back wheel. but back wheel is there when he is under the thing, then puts in a new front wheel?

@jopequi

29 күн бұрын

Creo q es para poder centrar la rueda, puede utilizar el trinche como guía

@Ferrari255GTO

18 күн бұрын

@@jopequi weon lo que dice es que despues de cortar la llanta trasera, monta una delantera pero al montar la delantera hay una trasera montada

@elite_riddimzgaming3427

16 күн бұрын

​@Ferrari255GTO cutting rear spokes, a wheel is complete.....made up of a tyre (the rubber bit) a rim (the metal bit the tyre sits on) spokes and a hub (the centre piece in question). Can confirm he never cut a tyre. Yes he did mount a rim that was on a rear hub to a front hub, probably bought a new rear complete then used the old one as its a sqaured edge rim....most g sport or skylark front rim's have a rounded edge....he wanted matching wheels not one rounded one squared in a set

@Ferrari255GTO

16 күн бұрын

@@elite_riddimzgaming3427 yes, i know what both spokes and spoke nipples are, i was generalizing. Also llanta is Rim, not tyre, tyre would be Neumatico o Cubierta

@benjammin893

11 күн бұрын

yep. you're exactly right. it's a total setup oopsie video

I really spoked to see the end result, amazing 👏

@T77BMX

4 күн бұрын

Thanks brooo!! 🤣👊

You a real one my guy.

@T77BMX

4 күн бұрын

Thank you my brooo!! thats too kind 👊👊

Video ended when he found out how difficult is to true spokes by eye

@T77BMX

16 күн бұрын

Hahaa! 😅 Yes we actually finished it off inside the workshop using the tool. But this method is possible… just very hard like you said!

@elparpo9

16 күн бұрын

​@@T77BMX good video!, i even adjusted mu wheels some time ago, lateral truing is easy but having a round wheel isnt! haha cheers keep on the good work

@bmxscape

2 күн бұрын

@@T77BMX if you start by threading every nipple just to the point where every t hread is covered, known as "zeroing spoke nipples", every spoke will be evenly threaded and you can then just add 2 turns per spoke at a time going around the wheel until its tight. if it was a good rim to begin with and proper length spokes you will get a true wheel

i honestly never knew you could do this. thanks for the education.

Yeah I’m just gona pop down the bike shop and buy a new wheel

@FrustratedBaboon

11 күн бұрын

Chicken

@Indicasativa55

11 күн бұрын

@@FrustratedBaboon definitely mate but tbf I know if I did it my bike would never work agin

@Tim_On_Line

11 күн бұрын

В этом теряется весь вайб DIY.....

@Indicasativa55

11 күн бұрын

@@Tim_On_Line 🤷

Just happened to have the right length spokes with him but not the right tools 😂

@shanewinslow7285

12 күн бұрын

😂😂

This deserves way more views.

@T77BMX

4 күн бұрын

Thank you so much bro thats awesome!!! 👊👊👊

Anyone who actually rides knows most g sport and skylark rims that are front mounted have curved walls not squared ( for brake purposes on a rear only brake set up) so he obviously wanted a complete matching wheel set not a curved and sqaured so hes put a squared rim on a front hub so both front and rear wheels match

@shanewinslow7285

12 күн бұрын

Now i understand lol ty. My ocd would probably have me do the same... but minus doing it myself 😂

@wf8045

5 күн бұрын

Thank you for explaining. I was confused

I'm stuck at step 1. Now doing it to other bikes to gain enough experience for the other steps

@T77BMX

16 күн бұрын

Ohhh nice!! Haha just the sitting spokes? 🤣🫡👊👊

Not a lot of people know how hard it is to respoke a wheel. Color me impressed😅 I threw out so many lightweight GT rims in my day because I had no idea how to do anything with them at all😅

@T77BMX

4 күн бұрын

Hahha niice!! yeah the old school rims were super weak they must have broken every weekend!! Glad you enjoyed the content, thanks for the comment!👊

@mathewdecorse5748

4 күн бұрын

@@T77BMX I had a set of 1987 gt gold rims (idk specifically) but as a 13 yr old I could lift the while GT with a pinky easy, most of it got stolen. Chopped right out of highschool but that ol GT took everything I gave it. Went thru dirt vert canal and street ramps. Ol girl took anything I could give it(unlike my hs gf 😆). Now I think about jumping on a bike I gotta let the ER know before I set out 🤣

I love lacing and truing- I use to sit at my coffee table and build a set every night after work for local shop. They would pay me 50 dollars a set to build them. My garage had pallets with hubs, rims and spokes.. it was a fun side gig.. i miss that in my life

wheel building kinda goes hard ngl

Bro made it look way too easy

@CrypticArtsStudios

15 күн бұрын

It's called editing....

The people on this thread that don’t understand the skillllll it takes to true wheels with the right tools let alone none. This is impressive!

FTP G*59

@yeryehaua9165

14 күн бұрын

G59 till the grave

pro in truing dangg!

@private-nobody6667

17 күн бұрын

Brought me back in the days when I used to work in a bike shop and one of our specialties was creating wheels from scratch, not an easy job. 😊

Yup. That's how it's done! Watch and learn!

@T77BMX

Ай бұрын

You the man!! 🙌🫡

@joeaznorth

Ай бұрын

@@T77BMX check out the komatsu pc01 for building jumps. I want 1 so bad

No one can truly claim to be a Zen Master, until they've laced a wheel from scratch.

Reminds me of my childhood 💯💯💯💯 love it 😊

@T77BMX

10 күн бұрын

Wiiicked! Thanks for the comment dude we are glad you enjoyed it!

Bro I need a new rear rim u got any old ones u can ship

@elelly1845

Ай бұрын

They're identic There aren't front or rear rim

@Ferrari255GTO

18 күн бұрын

@@elelly1845 i think he's asking for a full rim not just the ring of the rim, otherwise there'd be no need to specify

@bmxscape

2 күн бұрын

@@Ferrari255GTO point is there is no rear rim, however there are rear hubs and rear wheels. proper terminology is important when dealing with wheels. tire rim spokes hub all together make a wheel.

He is a genius. He took the back Will off and put it on the front of the bike wow.

@T77BMX

4 күн бұрын

Thanks broo!! yes the Spokes were too rusty and the Hub needs full internal service. We re-used the rim because its in good condition! thanks bro 👊

This takes me back to when I use to ride..

@T77BMX

4 күн бұрын

YES!! thats awesome bro thanks for the comment!! 👊👊

Crazy mechanic skills he’s done that 50xs at least it’s not easy at all

@T77BMX

4 күн бұрын

Thank you so much bro!! yes re spoking can be sooo hard sometimes! thanks for the comment broo 👊👊

Looked like the right tools. Made easy work of it anyway.

@T77BMX

4 күн бұрын

Thank you so much bro!! Yes we almost had all the correct tools, It was just the Truing stand at the end to make the rim straight... 👊

Wheel building and fixing buckles is very therapeutic

No way you did it at the skate park, thats hard core bro 😂😅😊

@T77BMX

4 күн бұрын

Hahaha my guyyy!! thanks brooo much appreciated 👊👊👊

This is an influencer that can actually teach you something

@T77BMX

4 күн бұрын

Thanks a lot Bro! 👊👊

Now *THAT'S* "BeSpoke!" 😊

@T77BMX

4 күн бұрын

Waheyyy!! thats an aweosme comment bro! thanks so much 👊👊👊

My guy snapping those tire rods like it's nothing

Trued that wheel like a champ

@T77BMX

4 күн бұрын

Thanks brooo! 👊👊

I just finished building a set of wheels for the first time…. This is unbelievably impressive

Man this dude works fast !!! 🤔

@T77BMX

4 күн бұрын

Thank you broo!! 👊👊👊

I had no idea spokes on a bike rim could be replaced or adjusted. Cool

Your humor is top-notch.

Always detention, never cut spokes it can damage the hub flanges and the rim

@T77BMX

4 күн бұрын

YES! Very smart broooo. We did loosen these spokes first so tension was not too strong for when we cut the spokes!! thanks bro 👊👊👊

Beautifully done sir

Putting all the spokes in on the same side of the hub is crazy

He turned wheel to wheel. Amazing

@alphaomegazulu8451

9 күн бұрын

F u, want a piece of me? Us riders stick together just like the local drug dealers yall became and now we war.

His patience is unmatched

You know what they say, one man’s skating ramp is another man’s garage. 😅

The unemployed friend on a Tuesday afternoon

@T77BMX

4 күн бұрын

HAhaha. Not quite... But thanks for the comment! 🤣

@Watergiant95

4 күн бұрын

@@T77BMX entirely satire, turned out great and you did something I never knew before.

This was my childhood. We would have repair days before summer hit. Then I bought mag wheels. To hell with those spokes

@T77BMX

4 күн бұрын

HAHAHA no way!! and the Mag wheels lasted? I have heard many stories about Mag wheels breaking!! 👊👊

I usually do that stuff at home. Hardcore.

Bro demolished his old wheel to construct a new wheel

@T77BMX

4 күн бұрын

haha yep!! the spokes were too rusty they all broke really easy. And the old hub needs a full internal service. But the rim was in perfect condition! thanks bro 👊

*Arrived at the skatepark 8.00a.m *wheel build finish 3.00pm

Dominican Republic kids all day everyday i swear this is their specialty😂 Im Dominican myself.

Excelent job👍

@T77BMX

13 күн бұрын

Thank you so much!!

As a teenager with a spoke key, I had this power to fix or ruin wheels. I was a twat

@T77BMX

4 күн бұрын

Hahaha!!! niice. Yes very valuable skill to have down the skatepark!! 👊👊

I subscribed so fast I love a man good with his head and hard working with his hands ❤

This was a video of all time

@T77BMX

4 күн бұрын

Thanks brooo!!! 👊👊👊

And then you forgot a Torx Screwdriver 😜

@T77BMX

4 күн бұрын

Hahah yes that would be even better brooo!!! 👊

Don't do it at home unless you know how to place the spokes 😅 it can be really tricky if its your first times.

As a bike mechanic who mainly works on expensive mtbs with proper tools in my cozy workshop this is truly impressive to do it at a skatepark! Props to you, you’re a mechanic at heart.

I spoke my front wheel back in the day and it took me about 4 hours to get true but it was still a little wobbly, did the job tho lol

My man's went on Straight tweaker status

@T77BMX

4 күн бұрын

HAhahaha 🤣

i remember the days piecing together bmx bikes out of spare parts from others and most the time only using wrong tools working with bare minimum

@T77BMX

4 күн бұрын

Haha yess!! thats what BMX is all about!!👊👊👊

he attacked that wheel like it owed him money

@T77BMX

14 күн бұрын

🤣🤣🤣

@shanewinslow7285

12 күн бұрын

😂

Now i want to hear a mash up of a track with the sound affects of this video

@T77BMX

4 күн бұрын

Hahaha no Way! that would be hella sick!!! 👊

This blew my mind, hella cool😅

Irony being when the wheel wasnt even straight

@T77BMX

4 күн бұрын

hahaha its ok it is now! 👊👊

Not gonna lie, you had me in the first half😅

People that don't have too much money are the most creative.

@T77BMX

4 күн бұрын

YES! Thanks broo 👊👊

The patients of Kobe to do that all at the park lol I would have forgotten some tool that I need to complete it I’m sure😂

@T77BMX

4 күн бұрын

Hahaha! That’s so true bro I was really stressin that I would forget something 🤣🤣👊👊👊

This was awesome , cool little short.

I remember doing this at around 13... I put it together all wrong and the spokes were all different lengths. Took me about a month of messing with the setup to get it right.. only to find that id being doing it right the whole time the tension changes as you put more spokes in...well it did back then anyway 😂 20 years ago 😬

You'd be surprised how few people can work on a bike

@T77BMX

4 күн бұрын

YES! thats so true bro 👊👊

“Bro I just pulled up to the park where you at I don’t see you anywhere” Him : “oh I’m just under the ramp, doing weird stuff”

Painted the break surfaces, but otherwise a good build. Chill vibe

@joshsalsman2806

14 күн бұрын

I dont see brakes on his bike so thats probably a used rim from a buddy. 🤷

@T77BMX

14 күн бұрын

Yes we did and the rim already had a bit of rim brake rub

Bro ain’t no way you finished that shii by eye.😂💯

Sheeott, I thought you was going to make a basketball hoop.

@T77BMX

4 күн бұрын

Hahaha!! niiice man, thanks for the comment👊👊

@TheKrazyinjun

4 күн бұрын

@@T77BMX 👊👊

I shudder to imagine how you balanced the spoke tension on that wheel without tools

That spoke tune better be 💯😂

Spray painting without a mask on is wild.....

Trueing a wheel isn’t that hard if you know what you’re doing😂(coming from a bike/grill/patio set,etc assembler) lol

You're on the level if you're repairing stuff with the wrong tools.

@onelovejl8098

10 күн бұрын

Lol an so what the job was done perfectly

@darthpalagus3820

10 күн бұрын

@@onelovejl8098 That was my point

Lacing wheels always pissed me off so bad lol

@T77BMX

4 күн бұрын

HAHAHA yeppp! its a pain in the A**! 🤣👊

Você é um gênio um artista ❤😂😢😮😅😊

Ngl the most I can replace is the Bearings and sprocket as well as handle bars etc

@T77BMX

13 күн бұрын

Hey that’s not easy work, props to you for doing the bearings!! 🫡👊 Glad you enjoyed the content

A bike shop would’ve charged me $700 to do that.

@shanewinslow7285

12 күн бұрын

God damn 😮

A lot of people have no idea the bike frame can be used to true the wheel.

Thanks bro you are the best

switched from water, to H20😂

Good work man👍🏽

@T77BMX

16 күн бұрын

Thank you bro!! 🫡

Homie made that look easy. That shit is a pain in the ass

This guy gets high and cleans his bikes everyday

"Hey see that wheel?" "Yah!" I gonna destroy it and put on a similar one..ya know, like a smart people does!"

@T77BMX

4 күн бұрын

YES! Exacltly. Because the rear wheel was Broken so we used our brain to create new Wheel out of the Rim that was still working!