I am delighted to find your youtube video I managed to clean my cooker hood motor as directed .it took us a long time but finished and fan is working again much thanks .Delighted thankyou thankyou Val

Thanks my man! Mine hood is working fine just need a bit of cleaning and the fan making squeezing sound need lubrication for sure. Will update tomorrow

Thank you for this vedio as i was looking for motor similer to mine..Hotpoint Cooker HE62X Hood Impellor Fan. It is exactly same probably come from same manufacturer. This vedio helps me to understadn set up. I was able to clean the dity fans as original digrams does not tell full story

Buenas tardes yo limpié mi campana y cambie los filtros pero me hace un pequeño ruido q sera

Thx bro

Does cleaning the outside of the motor with the wire brush improve its operation?

@TIRestoration

3 жыл бұрын

yes, the motor can then lose its heat better

@ilovemyvfr

3 жыл бұрын

Ahh yes ok, thanks for a very informative video.

Is the grease you use regular vaseline? I currently have my device open, and the only thing i'm still unclear about is what type of oil/grease to use to unblock the (stuck but not dead) motor unit

@TIRestoration

2 жыл бұрын

I used gear grease, you can use WD40 to unblock the motor unit and then grease or lubricate oil for the moving parts. good luck

@yoepswank929

2 жыл бұрын

@@TIRestoration i found a WD40 spray in the kitchen, some gear grease in a toolbox the previous tenant left, and it bleeping works again o.O thank you for the quick reply, from all four in this house!

Thank you very helpful. Mine is not working, so I will start cleaning from tomorrow and will see how it goes. How to find on meter that motor is dead ? Or what is the first first step you take to find what is wrong with motor ?

@TIRestoration

Жыл бұрын

If the resistance of the motor windings measured with a multimeter is too high, than there is probably something wrong with the motor. Of course you do that after unplugging it. Good luck.

I have a virtually identical motor but the springs are tiny. The motor axle is free to move up or down about 1cm and causing the fan to scrape against the housing. Any thoughts?

@TIRestoration

2 жыл бұрын

If it is the same it might be the nut in the center of the fan has come loose, you can adjust the fan up or down and tighten it well, you can also check the video at 10:40. good luck

@noelmoore4474

2 жыл бұрын

The nut us tight. The issue is that the axle is free to move backwards and forwards along with the armature so that the fan hits either side of the housing.

@noelmoore4474

2 жыл бұрын

I have packed this with a couple of washers to minimise the axle movement and it seems to work. Thanks again for the video.

Where this type of motor available. Can it be fitted in Glen chimney hood. please advise.

@TIRestoration

3 жыл бұрын

You can look on the internet or second hand market for glen chimney motor

@ravichandran-py6oz

2 жыл бұрын

Where did motor available

Interesting. My 10 year old motor suddenly died while in operation. Wondering if taking it apart and cleaning will do anything. Can't buy a replacement motor without it costing more than a whole hood.

@TIRestoration

Жыл бұрын

Sometimes it's worth taking it apart to see what could be the problem, before buying a new one. Good luck

Which company chimney was it?

@TIRestoration

3 жыл бұрын

The brand name is Atag

App mughe bta skte ho kya sir mughe chiye

i cleaned mine was working for 1 week and now has no voltage going to the motor but the lights are working fine. I will figure it out when i have more time . Any suggestions ?

@TIRestoration

5 ай бұрын

You can measure if the is a voltage going to the motor. Good luck

@Daxaka88

5 ай бұрын

@@TIRestoration the termal fuse on the motor was faulty

Is chimny ke moter or impeller chayes

@TIRestoration

3 жыл бұрын

Is impeller motor cooker hood

Handig zo’n striptang he?

In this motor there is capacitor?

@TIRestoration

Жыл бұрын

This a single phase induction motor that has a capacitor in the auxiliary winding circuit to produce a greater phase difference between the current in the main and auxiliary windings. It starts with the help of a capacitor. Good luck

@live-your-way

Жыл бұрын

@@TIRestoration How can we increase the speed of this motor ,mine is running very slow

@TIRestoration

Жыл бұрын

@@live-your-way By increasing the supply frequency. Good luck

@paulhendrick7640

3 ай бұрын

How can we check the capacitor?

Sir kha se milegi ye moter pls no de do

@electrichub2634

3 жыл бұрын

Bhai mili kya motor. Mi bhi yahi motor dhoond raha hu. 2 coil me mil he nahi rahi hi

Aapke mobile nabar

Sharab ke contact number

Sharab ke WhatsApp number

You don't have tools

Non funziona