Cool peddle. Thats a really nice Miller welder.

@txsviking

7 жыл бұрын

Thanks. It takes care of me so I try to take care of it. 👍

Thanks for the lesson professor.

@txsviking

7 жыл бұрын

You're welcome grass hopper.

@mostlymoparih5682

7 жыл бұрын

I caught em I caught em. I caught the fly professor. Do what now? Let em go? Sorry professor I got so excited that I caught em, that I squished em. Do I gotta start over professor? Awwwww

Another job well done.

@txsviking

7 жыл бұрын

Thanks and have a great weekend.

Cool to see how things work.

@txsviking

7 жыл бұрын

Thanks buddy. Had a few request for that. 🍺🍺

I thought those foot pedals have more to them. Surprised to see they are as simple as my converted wah wah pedal. But I have not figured out yet how to make it limited by the main switch. Great vid thanks.

@txsviking

7 жыл бұрын

Not to sure newer inverter welders work the same way. I see a lot of confusion on the how too's of the foot peddles. 🍺🍺

great setup txs. 💪🍻🍗

@txsviking

7 жыл бұрын

Thanks buddy! 👍🍺

Heli arc ,,, this is an old hand , and it shows .What a nice job , the turntable through the bench top to a foot wheel [ im guessin] is just genius , Ill have one of those very shortly , well I will now Ive seen it.

@txsviking

2 жыл бұрын

Once you do you will never be without one. Thanks.

@tomthompson7400

2 жыл бұрын

@@txsviking I've never seen that idea before .. and I've seen a lot of things LOL .. every days a school day .

Nice and simple, just was a little dusty inside. Good stuff!!!It

@txsviking

7 жыл бұрын

It gets kicked around every day so it needed some love. lol

Getting my "1991" Syncrowave 350 in a week or so. Wondered if possible if you could show how your syncrowave 350 is setup: single phase 230v, what size breaker, your argon gas, water cooler , etc. First time making comments. Thanks and I'm glad you are doing well now. Just saw your video on "What Happened"

@txsviking

6 жыл бұрын

It is single phase with a 100 amp breaker. I use a WP20 water cooled torch with a Bernard water cooler. 100% argon for most things and 25/75 Helium/Argon for thicker aluminum. That's about all there is to it.

Found this very interesting. Thanks for showing us. Btw I've found most of your vids interesting, don't comment on all of them. Just like many of us RK etc. Just so you know :)

@txsviking

7 жыл бұрын

Thanks buddy. Glad you liked it.

Awesome! Gotta love the dust in electronics man I could tell you some stories! :)

@txsviking

7 жыл бұрын

I spend to much time kicking that foot peddle around on the floor and not enough time cleaning it out. lol My Dell looks the same I'm sure. 😱

@MidwestMotoRider

7 жыл бұрын

tisk tisk you should get that Dell cleaned out! :)

@txsviking

7 жыл бұрын

I'd like to build a SSD drive pc. for the next one. I'll see how it goes.

@MidwestMotoRider

7 жыл бұрын

So if you do keep in mind not all SSD's are created equally. If you can do an NVME 2.0 that would be awesome for Video editing/rendering. Short of that use a good SSD Sata drive. Most cheaper SSD's are fast on Reads but only marginally faster on writes. You will want to put some money in a video card also since most video editors will take advantage of the GPU's in the cards.

@MidwestMotoRider

7 жыл бұрын

I should have said a NVME 2.0 drive forgot the drive part. Basically its a SSD that goes right on the Motherboard so its faster by a lot.

Thanks Terry. My square wave is definitely not as smooth as your Miller. Not even close haha

@txsviking

7 жыл бұрын

I have 1100 pounds of copper in this old Miller. That makes it work real smooth. The invertor's are a harsher type of machine.

@mostlymoparih5682

7 жыл бұрын

Wow, that's a lot of copper.

Never TIG welded in my life. I have acetylene welded light gage steel (diesel exhaust pipe) for 30+ years. Just bought a Miller Dialarc 250HF but no TIG equipment. Just wondering if it would be worth it to buy the TIG setup vs keep on gas welding? I am good at gas welding but it would be nice to adjust heat mid-steam. Worth $500+ for the foot pedal setup?

@txsviking

5 жыл бұрын

For exhaust work, acetylene is fine. I can't work without a foot pedal doing what I do.

I realize video is kinda funny about how it works. Any way to put a filter lens on the camera so you can show arc and puddle flow?

@txsviking

5 жыл бұрын

I tryed that but the camera won't focus through a lens.

that looks like the thing they trap ghosts in on Ghostbusters 👻

@mostlymoparih5682

7 жыл бұрын

I ain't afraid no ghost.

@txsviking

7 жыл бұрын

I never thought of that. I have an opportunity for the future. lol

I have a miller rfc14 pedal,that has the 1,000ohm resistor it starts my airco heliwelder v 300,but i think it the wring value,because i cant get much amp control. Where can i get another resistor with other values from? Thanks.

@txsviking

6 жыл бұрын

Maybe from a Miller dealer?

Good stuff Bud!! Not much to that foot pedal eh!!☺

@txsviking

7 жыл бұрын

Very simple and very reliable. Like us. 😉

Are you using 17-4 filler material? Jim

@txsviking

7 жыл бұрын

Yes, I weld a lot of 17-4.

I love those ground clamps. gets some new gloves before you smoke your fingers.

@txsviking

7 жыл бұрын

I know. I'm bad about using gloves to the limit. Yes, those ground clamps rock. 👍👍

I`ve always wondered with they was in there...are the new ones more electronic do you know...I have to buy one for my tig....ah money...ah well i`m retired when I worked i`d just buy whatever I wanted....no more ...we see if its in this years budget with the finance minister....SALUTE

@txsviking

7 жыл бұрын

The newer ones are different. I don't know much about them but they are different. Thanks buddy.

@mostlymoparih5682

7 жыл бұрын

Is that finance minister or finance misses?

@billshuey7422

7 жыл бұрын

Gator's World I am also retired and living Thailand. Thailand poses an additional problem just finding it

@gatorsworld

7 жыл бұрын

you know what the answer to this is at the moment I would like to submit that if I say somthing it could be held agains me....SALUTE

@mostlymoparih5682

7 жыл бұрын

I know what ya mean Gator. We had a problem with a leaky sink and I was in the middle of doing something when this malady was pointed out to me. I told the lovely lady that I would fix it but did not add Wright write rite right away. Well she said ok but it was the kind of ok that meant she was not happy that I didn't say right away my lady. Sooo I went to home depot got some stuff and fixed it before I finished my stuff. If momma's happy poppa can be happy and sometimes ya gotta plead the 5th and read in between the lines.

Thanks for thinking about my eyes. I had a dose of arc eye once, years ago. Like rubbing sand into your eyeballs. That was no fun.

@txsviking

7 жыл бұрын

I only did that one time when I was 18 and never again. Thanks buddy.

No need to worry about arc eye through a video

Here's a video on a ~2010 Miller foot pedal: kzread.info/dash/bejne/rIWDxcqsf8mXgaw.html Txsviking: I put a link to direct traffic to your video for people with this older style of foot pedal.

@txsviking

7 жыл бұрын

Thanks. I know there are still a lot of these out there.

Captain Jerk ?????

@txsviking

5 жыл бұрын

Yep.