Expansion Joint Repair and Restoration to Stop Water Leakage | Dr. Fixit Pidiseal PS
Expansion Joint Repair and Restoration to Stop Water Leakage | Dr. Fixit Pidiseal PS
In this video, I have explained the waterproofing treatment for expansion joint. This was an old expansion/construction joint from where the water leaking problem did appear.]
We carried out this treatment and steps have been mentioned in the video.
Products used here : Fiber Expansion Joint and Dr. Fixit Pidiseal PS
Contact Information :
MAVANI Waterproofing Mo. 9712666464 / 9510055555
AUDIO CREDITS / MUSIC: www.bensound.com
AUDIO CREDITS / MUSIC: www.dreamstime.com/stock-musi...
#expansion_joint_repair #expansion_joint_waterproofing #expansion_joint #what_is_expansion_joint
link to my youtube channel: / civilengine. .
Email Address: pratik.933@gmail.com
Contact: 9016464933
Пікірлер: 27
What’s the ratio for pidiseal and accelerator
Very nice
Super work Aisa kam Maine Aaj Tak nahin dekha
@CivilEngineeringForum
2 жыл бұрын
Thanks
Super
Is it ne essary to widen the crack?
👌🏻👌🏻👌🏻
Before filling PS 41g do we need to priming the surface? If yes Primeseal is ok?
@CivilEngineeringForum
2 жыл бұрын
Yes Go ahead
👍🏽👍🏽
Is it work
Saree problem solve hoge is video Ko dekhkar
Is your firm based out of Bangalore?
Bhai old slab or new slab ke joint me pani leak hota h kya kiya jay
I have applied this dr fixit.but it looks very rubbery instead of hard solid..is it right?
@CivilEngineeringForum
2 жыл бұрын
Yes, But its main ourpose is not to allow water to pass through. Strength is not required there
Hai Sir I want this product how to purchase this
Hi
It's life?? How many years this treatment. Can stop water leak
@CivilEngineeringForum
2 жыл бұрын
It will work 100%
@saraqasimvlogs3194
2 жыл бұрын
@@CivilEngineeringForum can you mention no of years I mean it's life
@CivilEngineeringForum
2 жыл бұрын
Dear, this is the permanent soultion. Life time
For expansion joint this is not the right method. First the expansion joint should not bond any where. Why r you cutting? Second use a quality sealant instead of Unknown material. Third the best method and look will be very nice install a galvanized angle bar both side and then install backer rod with selant.
@DigitalConstructionWorld
2 жыл бұрын
And should use flexcel board from below insted of cutting.
@CivilEngineeringForum
2 жыл бұрын
It is not bonding we are removing the previouly apply expansion joint. We are retrofitting the structure in this video as mentioned
@woodsnbricks4078
Жыл бұрын
Can you explain the angle bar
This is not perfact solution. Sorry am also in this field bt dr.... have only polymer base products that does not given full guarantee cos epoxy epecial products done more better than this & also have written guarantee