No video
Expanding table 2
Turn white lowest square 45 deg. counter-clockwise to create a supporting plane.
At the same time two red pins fixed to the white square move yellow center square down thanks to yellow barrel cam (fixed to the center square) to create gripping space for flipping 4 triangular plates to expand the table.
The yellow center square has prismatic joint with the table legs.
The middle pink plate is fixed to the table legs by 4 orange pins.
This mechanism may be used in
• SEER table in oak - am...
STEP files of this video:
www.mediafire.c...
Inventor files of this video:
www.mediafire.c...
Пікірлер: 13
Brilliant, thank you!
dear thang010146 i was always amazed by the mechanism you have showen in the videos i want to devlop a good diameter jig for drilling a ss304 round stock of 10.7mm dia the drilling is to be done on circular portion at its center kindly upload a diameter jig video for better hassel free production thank you sir
@thang010146
5 жыл бұрын
Please refer to pages 57 - 72, Part 4 of my book: 2700 ANIMATED MECHANICAL MECHANISMS www.mediafire.com/file/6db2ju5ck75ce6x/2700AMMePDF.zip
@piyushthakare3495
5 жыл бұрын
Thank you sir I appreciate for your kindest reply
👍🏻👍🏻👍🏻👍🏻
Sir, could you provide STP file? this is really a good idea,I really want to learn,Thanks for Sharing!
@thang010146
5 жыл бұрын
Link for the STEP files now is in the video description.
may i know this software name
@thang010146
Жыл бұрын
All videos in this channel are made in Autodesk Inventor, Dynamic Simulation.
Why needs to turn? Just have the four piece triangles fold out , then no rotation needs
@thang010146
5 жыл бұрын
The problem is where to grip the triangular plates. Please read the video description.
@Berkana
5 жыл бұрын
If the triangular pieces just fold out, then all of the support depends on the hinges and the thickness of the table top. That may be too much stress for the typical hinge to handle, or would require an excessively thick table top.
@thang010146
5 жыл бұрын
Yes. At expanded position the triangular pieces are supported by 45 deg. turned lowest plate.