To call this man a handy man is quite an unintended insult I would say This Man is a Smart Smart Guy !!!!

Hola, lo que haces es increíble, tienes un talento maravilloso y es extraordinario ver algo tan único. La verdad es que no soy tan bueno como tú, pero hermano para ver lo que haces me inspiró. Así que me desafié a mí mismo y comencé a aprender poco a poco viendo otros videos tutoriales aquí y descubrí, créeme, esto fue lo que más me sirvió. Porque encontré un lugar donde puedo obtener el plan o el proyecto de carpintería en el que puedo pensar y lo mejor es que puedo tener todo detallado y a mano. Gracias, me diste inspiración y ahora soy un hombre nuevo. Sigue dando luz en el mundo que necesitamos talentos como el tuyo.

I was searching for an answer to my problem and you have given it to me, as well as saved me hundreds of dollars. Thank you very much. This subscription is the most helpful one I have! Keep it up, I will always watch.

@dekayscrafts

4 жыл бұрын

Thank you very much. Come to play often =)

Great project! I am going to try and build one. One possible upgrade to this would be to add additional table clamps to either or both extension tables so you can use stop blocks.

Muito bem feito,agrega mais recurso para o uso da serra circular,parabéns

@dekayscrafts

4 жыл бұрын

Obrigada

This is really great. I would like to see a miter saw variation. Which I guess I can figure out from your design. Thanks

@dekayscrafts

4 жыл бұрын

Thank you =)

What an excellent idea! I am a wood working newbie and don't have big space either. This design saved me from buying a mitre saw! Thank you for sharing 😊👏

Good idea... PVC is light , cheap and strong. I will use it for my truck storage.

@dekayscrafts

4 жыл бұрын

Thank you =)

Excelente Gig ,vou fazer pequenas alterações, parabéns nota 10. 👍🇧🇷🇧🇷🇧🇷

@EduardoSlepko

3 жыл бұрын

Olá. Vc sabe o nome desse grampo que é aparafusado na bancada.

Una mesa de trabajo para la sierra, muy completa. Muchas gracias por tu tiempo y mostrar cómo hacerla. Saludos desde Guatemala.

@juancarlossolisgallardo3921

4 жыл бұрын

Amig9 y para hacer cortes 45? Falto mostralo

Parabéns.. vc e muito criativo!

@dekayscrafts

4 жыл бұрын

Muito obrigado

깔끔한게 멋지군요. 시간도 공간도 없어서 구경만 하고 있지만 언제 기회되면 나도 따라 만들어 보고 싶습니다.

@dekayscrafts

4 жыл бұрын

댓글 감사합니다 ^^

Dekay you are amazing, thank you so much for this idea, tools are very expensive and I only have a circular saw, with this jig I will work better with it, thanks a lot! Greetings from Chile :)

@dekayscrafts

4 жыл бұрын

Thank you =)

This is such a great design. Do you have plans for this and other projects available to the public?

@dekayscrafts

4 жыл бұрын

I'm sorry, all the images in the video are I didn't make detailed drawings, I imagined =)

@mrnoodlelai

4 жыл бұрын

Yes, I love the design. some measurement would be nice.

Waw that’s cool The only thing left is to make that cut up to 45 degrees and you will never need a mitre saw again!👍🏻

@dekayscrafts

4 жыл бұрын

okay i wll Thank you =)

영상 잘보고있습니다~~굿!!👍🏻👍🏻👍🏻👍🏻

@dekayscrafts

4 жыл бұрын

감사합니다~

Bell'idea e ottimo risultato complimenti

@dekayscrafts

4 жыл бұрын

Mille Grazie

Thank you for your wonderful video. You inspired me to do woodwork. I have build my workbench with your sizes and from your DIY video. It looks so easy what you do and everything fits right away :D But when i do it, i need some trys before. Keep going, in like what you do. Greetings from Germany

@dekayscrafts

4 жыл бұрын

Thanks a lot =)

Bom dia, gostei deste gabarito que você vez muito bom ótimo gostaria de fazer um para mim você teria as medidas para me mandar. Parabéns você é ótimo.

@dekayscrafts

4 жыл бұрын

Obrigada

GRACIAS POR EL VÍDEO Y APORTE, EXCELENTE TRABAJO....

@dekayscrafts

4 жыл бұрын

Gracias Gracia

Como sempre um serviço melhor que o outro. Mais o que ainda continuamos querendo de Você é que possa Disponibilizar seus projetos com planos para que nós que adoramos seu serviço , podermos também Fazer. Fica aqui meu apelo e também um grande abraço. E que muitos projetos possa vim pela frente !!!

決して、潤沢に道具があるわけではないのに、工夫してDIYされている姿に感動しています。 また、手際が良いです。尊敬します。 以下、上記の機械翻訳です。 I am impressed by the idea of being DIY in spite of having no tools. Also, skill is good. Respect to you.

@dekayscrafts

4 жыл бұрын

良いコメント非常に感謝します。

Я подписался, настоящий мастер👍

@dekayscrafts

4 жыл бұрын

Спасибо большое

Excelente aunque un soporte para poder desplazar los tubos como unas ruedas o unos pedazos de madera en la base para que se extienda sin problemas. saludos

@dekayscrafts

4 жыл бұрын

Buena idea Gracias

Подписался. У вас интересные и полезные идеи. Хорошая работа!

원형톱을 간단한 마이터 절단기로 바꾸기! 잘 봤읍니다^^

@dekayscrafts

4 жыл бұрын

감사합니다^^

LOL thanks you have just solved a problem for me.

Bonjour, encore une excellente réalisation bien filmée👍👏👏 ! Merci pour cette vidéo. Norbert ( France)

@dekayscrafts

4 жыл бұрын

Merci beaucoup.

Loving your channel! You’re a real handyman!

Love this channel and I love how your brain works! Please keep it coming!

각도에 따라 절단되는 기능 추가되면 퍼펙트할것 같네요^^

재밌게 잘 보고 갑니다~~^^

@dekayscrafts

4 жыл бұрын

감사합니다~ ㅋㅋㅋ

Parabéns pelo o seu trabalho 👌

@dekayscrafts

4 жыл бұрын

Obrigada =)

brilliant design and excellent tutorial video

@dekayscrafts

4 жыл бұрын

Thank you =)

Muito bom, gostei.

@dekayscrafts

4 жыл бұрын

Muito obrigado

Me ha encantado tu trabajo y lo bien y lo fácil que lo presentas aunque el video, en algunos momentos, va demasiado deprisa y hay que rebobinar para atrás. Muchas gracias por exponer tu trabajo. Pienso hacerme una guía igual. Saludos cordiales.

@dekayscrafts

4 жыл бұрын

Muchas gracias

Nicely done! I wonder if you could make the top section only (that holds the saw) rotate so that you would be able to cut any angle up to 45 degrees? Just a thought...........

@dekayscrafts

4 жыл бұрын

I'll add that feature later. Thank you =)

Genius! Brilliant!

@dekayscrafts

4 жыл бұрын

Thank you =)

show... perfect

@dekayscrafts

4 жыл бұрын

Thank you :)

thank you for video. this is a great design

@dekayscrafts

4 жыл бұрын

Thank you too :)

Love his work

Very useful! Great job!

Wow.......what an excellent idea. Will build one as soon as I can get some plywood.

Muy bueno gracias voy a construirlo Saludos desde Argentina

@dekayscrafts

4 жыл бұрын

Hola Gracias.

it's an awesome job. how wide could a board go in this contraption?

@dekayscrafts

4 жыл бұрын

The wider the middle board, the longer the pipe can be and the more you can expand. You can make it whatever you want.

Una idea muy brillante , para esta herramienta tan importante.

@dekayscrafts

4 жыл бұрын

Hola Gracias.

Love the projects and this one in particular. Is there ever any cut lists for them?

Спасибо , все круто, возьму на заметку

@dekayscrafts

4 жыл бұрын

Спасибо за теплые слова

I don't have a miter saw and right now, limited on money to get one. This may be the answer I need for my very small shop. Until you find a way to make it work here, it doesn't do miters, but it will do great quick cross cuts for long material.

@dekayscrafts

4 жыл бұрын

Thank you =)

if you need to do repeated cuts you could even add a stop block on one of the two fence and some kind of locking mechanism :) I really dig it!

@dekayscrafts

4 жыл бұрын

Thanks =)

If you made this wider you can get rid of the table saw....lol. Nice work

@dekayscrafts

4 жыл бұрын

lol I'll be careful

Realy clever way to do it. Excellent.

@dekayscrafts

4 жыл бұрын

Thank you :)

Felicidades gran trabajo👍

Hola excelentes proyectos que tipo de madera usaste en este proyecto saludos desde mexico

This is brilliant. I'm going to use a shelf pin jig on the base to drill holes every 1/4 inch, to make repeatable cuts. I see in your other videos you removed your clamp downs, any particular reason? Were they getting in the way

@dekayscrafts

4 жыл бұрын

Thank you. The clamp was temporarily removed for replacement. =)

Thank you I love your videos.. very helpful .. thank you for taking the time do record :-)

@dekayscrafts

3 жыл бұрын

Thanks =)

I love your work. Actually am watching your old videos. But I just want you to know that am new in watching KZread videos

좋은 내용이네요..

@dekayscrafts

4 жыл бұрын

감사합니다 ^^

AMAZING !!!

@dekayscrafts

4 жыл бұрын

Thakn you =)

Amazing 👏🏼

@dekayscrafts

4 жыл бұрын

Thanks =)

Nice work. Thanks for sharing.

@dekayscrafts

4 жыл бұрын

Thank you too. :-)

nice. Did you consider a dust collection port? Curious how you would implement that.

멋져요

@dekayscrafts

4 жыл бұрын

감사합니다 ~~ ^^

good job...

@dekayscrafts

4 жыл бұрын

Thank you =)

Hey...This ding ist great. Especially for laying wood flooring. I am shure, it is lighter and more convenient in transport, than a sliding Mitersaw. I will build one... for certian..

@dekayscrafts

4 жыл бұрын

Thank you very much =)

A la hora de hacer un trabajo grande creo que la echarás para un lado y usarás la sierra de mano

@dekayscrafts

4 жыл бұрын

Si claro tal vez Pero soy un principiante cuyos pasatiempos están haciendo Estoy bien incluso si no lo uso

Thanks! I need one of those!

Wow... i will try

Bonjour, Ça fait deux heures que je regarde vos tuto, pour moi ils sont géniaux, vous filmez à l'essentiel. Vous êtes très doué dans la conception des outils qui nous rend la tâche plus facile. Juste un renseignement, pourriez vous me donner un lien ou je puisse trouver les guides en fer que vous utilisez, merci encore et bravo, un admirateur de France. vivement les prochaine vidéo......

@dekayscrafts

4 жыл бұрын

C'est quelque chose que vous ne pouvez pas acheter en ligne Peut-être devriez-vous l'acheter dans une fonderie proche Je suis désolé je ne pourrais pas vous aider

Good idea sir

@dekayscrafts

4 жыл бұрын

Thank you =)

너무 잘 보고 갑니다.. 저도 레일 구매 방법이 궁금 하네요~ ^^

@dekayscrafts

4 жыл бұрын

스텐레스 절곡 집에서 쓰고 남는 자재라길래 얻어왔어요~ 기성품은 아닌데요, 만약 기성품 구매하시려면 '스텐레스 코너비드'라고 찾아보시면 다양한 형태의 제품이 있고 동네 철물점에서도 팔아요~

@user-zp6mj9fx8q

4 жыл бұрын

@@dekayscrafts 네 잘알겠습니다. 친절한 답변 감사합니다~ ^^

Nice vídeo. Congratulations.

@dekayscrafts

4 жыл бұрын

Thanks =)

Lo veo simple y muy viable.Lo voy a experimentar.Muy agradecido.

good idea

세상에!! 원형톱이 없는데 갖고 싶어졌어요... 손수만드신 저거 때문에 😃 ☺

@dekayscrafts

3 жыл бұрын

감사합니다. 어서 지르세요😃

@llvictoria85ll

3 жыл бұрын

@@dekayscrafts 팀장님이 만드신 목공작품이 없어서 안살래요 ㅎㅎ

I love this. Is there a building instruction?

Super good ... does a 45 ° angle work on your table? thanks

@dekayscrafts

4 жыл бұрын

Thank you =)

@jimlad01

4 жыл бұрын

A supplementary 45 degree front fence would allow for this

Great video and great channel. I've wanted to build something like this for a while. What kind of stainless steel track is that? I'm searching for it and haven't even found what it is called. Can you tell me what it's called and where you got it? Thank you for the video and keep up the fantastic work.

@dekayscrafts

4 жыл бұрын

I bought the leftovers from the iron mill near the workshop. I don't think it's ready-made. You will find it at the Ironworks. I'm sorry I can't help you.

@jimlad01

4 жыл бұрын

It's called 'L Section Aluminium angle' and is widely available

@dalejones9150

4 жыл бұрын

@@jimlad01 Thank you very much.

@dalejones9150

4 жыл бұрын

@@dekayscrafts I appreciate the reply. Keep up the good work.

All i can say is... i end up watching all your videos! Its great and i hope to make one of your designs. And i already subscribe to your channel.

@dekayscrafts

4 жыл бұрын

Thanks =)

Muy buena idea pero.. Que medida tiene cada pieza

Nice. Well done. Just a thought. If you made the ends vertical instead of mitred, and the box was square, you could cut 45 degree angles with this machine

@dekayscrafts

4 жыл бұрын

right. Very good idea I'll develop it next time =)

ONE WORD----WOW

@dekayscrafts

4 жыл бұрын

Thank you :)

Muy estupenda la Idea amigo, Pero una advertencia nada más: tenías wu haber puesto un sistema de aspiración para él polvo que produce al hacer los Cortes, no crees tú, ...?? Por lo demás ingeniosas ideas, ...!!!! Saludos amigo, ...!?!?!?

@dekayscrafts

4 жыл бұрын

Si, pienso igual Lo haré pronto

Parabéns! Fiz uma também.

good idea.l like it so much.

good !

@dekayscrafts

4 жыл бұрын

감사합니다 ^^

Прикольно! Но это же по сути торцовочная пила? Видео смотреть интересно

@dekayscrafts

4 жыл бұрын

Да, это так. Я сделаю лучшие инструменты позже

@MxSoM

4 жыл бұрын

Я себе сделал что-то подобное. Только идеально ровного реза так и не добился. Направляющие длинноваты (около 70см) или люфт вала у Metabo такой. Буду переделывать.

@SteveLeonov

4 жыл бұрын

@@MxSoM Возможно и геометрия подошвы не идеальная. Теоритически всё должно работать нормально, но очень много факторов которые которые могут изменять результат. Я давно убедился - если хочешь чтобы детали выглядели идеально и подходили друг к другу без зазоров, нужен дорогой инструмент.

I wanted to know if I could get the cut list for your Expandable Circular Saw. I will be glad to pay for it. Please let me know how I can get that from you. I do smaller projects and this would be a life saver for me. I look forward to hearing from you on this

@dekayscrafts

4 жыл бұрын

Improvised, no detailed drawings left. I'm sorry I can't help you.

정말 멋진 작업이예요. 저고 나중에 작업실 생기면 하나 만들고 싶어용. 너무나 창의적인 아이템입니다. 근데 혹시 직각자랑 삼각자는 어디꺼 쓰세요??? ^^;;

@dekayscrafts

4 жыл бұрын

스마토라고 쓰여있네요 동네 철물점에서 샀어요 ^^

Excelente me encanta la carpintería y me gustaría mucho si pudieran colocar las medidas o planos de las maravillas que haces

Great! What product (blue cup) you add throwing glue to the wood and what are you adding when drilling rails?? Thank you

@dekayscrafts

3 жыл бұрын

Epoxy bond =)

잼있게 잘 봤습니다~~

@dekayscrafts

4 жыл бұрын

감사합니다~~

buenas tardes amigo me gustaría las medidas me gusto bastante tu diseno

@dekayscrafts

4 жыл бұрын

Lo siento Todos los dibujos en el video son Las dimensiones utilizadas mm

Excelente idea de trabajo, donde puedo conseguir o como se llaman los "retenedotes" para que la madera no se mueva?

@diegolecaros2348

4 жыл бұрын

Hola amigo! Se llaman toggle clamp, o prensas de retención, yo compré algunas en AliExpress si no encuentras en tu país te recomiendo buscar ahí :) saludos desde Chile

@jorgegarcia-ry3iv

4 жыл бұрын

@@diegolecaros2348 muchas gracias, saludos desde México

Amazing!

Hi, nice tool. Please do another video to make it to do 45° cut

@Dnice1541

4 жыл бұрын

App K just cut inserts at 45 or any other angle to rest between the material being cut and the flat brace against which the material rests. You can cut any angle with this design

@dekayscrafts

4 жыл бұрын

Ok I will Thanks =)

@dekayscrafts

4 жыл бұрын

Thanks for the good answer =)

Amazing

@dekayscrafts

4 жыл бұрын

Thank you :)

Bienisima idea la base para la cierra circular me gustaria repetirla me puedes enviar medidas gracias

@dekayscrafts

4 жыл бұрын

Muchas gracias.😀

Fantastic job mate! Keep doing good work!

@dekayscrafts

4 жыл бұрын

Thank you =) 👍👍

smart!

@dekayscrafts

4 жыл бұрын

Thank you =)