You saved me so much $ and time with this fix!!! 2022 gsxr 1000 with less than 3k miles on it started doing the same thing. almost took it to shop but looked on KZread and found this video!!!! Keep up the great work brotha

@Obliter8Dave

3 ай бұрын

Glad I could help!

Million thanks for solving my rattle problem. Same as yours, only came across your video by chance. Job done no more rattle. Thanks again from a Happy Suzuki man from Ireland. 👍☘️

@Obliter8Dave

21 күн бұрын

@@ononewheellad great to hear! It is quite silly that something as simple as tightening a nut is needed on a brand new bike.

@ononewheellad

20 күн бұрын

@@Obliter8Dave Mine is a 2018 bike, that’s the first time I’ve had to adjust it, heard the rattle about a month ago. Thanks again.

Worked on my 2021 gsxr1000r like a charm thank you. ! The dealer had no idea how to fix this still in 21 FYI !!

@Obliter8Dave

2 жыл бұрын

Glad this helped... it is the whole reason I started making videos. Spent countless hours here on KZread and Google trying to find others who solved issues I've had on my bikes or other toys.

So much appreciate bro, I just adjusted it a few minutes before! It works, and I will never be confused by the rattle. Thanks!!!

Thanks for this, have had that noise since I bought it (same model as yours) and just figured it was factory.

Hi. Thanks for making the video, excellent work. 2 complete turns of the nut eliminated my rattle (in case anyone needs to know), bike has done 1400km. Suzuki engineers should have spent 3 more minutes thinking about the design. The steel arm rests against a steel right angle lug once you engage the gear. If you look at it you will see wear marks between the steel. Steel against steel in a component which will constantly have vibrations. It would have been easy to make a durable rubber sleeve to go of the lug and also include a description in the owners manual about adjusting it. Ridiculously overly complex exhaust header system. Kawasaki are more clever, all the valves etc are in a removal muffler and cat converter. So you can easily swap out one or both and utilise the existing headers. No silly steel to steel touching each other constantly. I believe that arm only starts to open the valves in the headers from 9000 rpm (well over the speed limits), that's when the arm begins to moves away from the lug. So for 95% of street riding it's always touching and vibrating. Not so smart Suzuki engineers! Design flaw. Regards.

Ha this is a way better video than mine. Good work. Easy fix. Mine has settled into a very slight rattle that I don't mind(like a quieter open dry clutch on a Ducati). Also the cover bolts are very easy to snap off so take it easy

Just done it on a ’21 1000R model which started rattling at 2000km when putting it on 1st gear (nothing on N). 2 full turns on the nut was enough to make this rattle sound gone. Thx for this tip. I’ve also seen that there is a second adjustement nut on the front of the bike, but the left fairing must be took off.

Fixed it in 5mins thanks man!

mine start doing this after a few pull, thx alot, save me a bunch of money for service at shop

Man im glad i found this 21 gsxr1000r had 2 dealerships mess with my bike and said the sound was normal. I knew it wasnt!

@Obliter8Dave

Жыл бұрын

Well, the sound isn't detrimental to the bike, so they don't care to make it go away. Personally, I hated that rattle.

@heavens_heathen8164

Жыл бұрын

I know im really particular about stuff and a bit ocd

My 2019 R just started doing this today at 5200 miles. Thought there was major issues with the gearbox. Will give this a try once the exhaust has cooled down a bit. 🔥

@Obliter8Dave

3 жыл бұрын

Let me know how it goes! Good luck!

@bern1e74

3 жыл бұрын

@@Obliter8Dave Mate, you’re a lifesaver. 10 mins later, job done. Thanks ever so so much. Just subscribed. 👍

Life saver....

Yo bro, I have a c46 code, I tried adjusting what you had showed in the video, it didn’t turn the code off, bike was sitting for some years, is there anything else to check so I can get the code off ? Bike only has 1500 miles on it

If you bypass the set valve on a 2011 and up, there is no brown wire in the #30 aka top row 5th from right side, that you remove to get the fI light off, like in earlier models. I know a servo buddy will work to fix the fI light. But i wish someone could tell me another way to get the fI light off (c46 code) without using a servo buddy, on newer model gsxr

My c46 light came on and ili googled the code its the valve code so now what should i do at this point? Any suggestions B

@Obliter8Dave

2 жыл бұрын

My guess is you opened the valve too much. You should only be turning the nut enough to get the rattling to stop. If you open the valve all the way, it will affect the AF ratio at low rpms.

@MCLIFE786

2 жыл бұрын

@@Obliter8Dave i didn’t even touch the valve yet my light came on yesterday which is for that valve so i was looking it to videos today to see how to reset the light and saw ur vid so just asking u think if I adjust the valve that will takecare the light? I have seen few videos of ppl resetting the light with bypassing the plug i did that but light still on

@Obliter8Dave

2 жыл бұрын

@@MCLIFE786 I googled c46. It looks like it is an error on the valve actuator itself. I am unsure if adjusting the valve will make the error go away. I did see that some have said disconnecting the cable completely helps, but I cannot confirm that is the case.

@MCLIFE786

2 жыл бұрын

@@Obliter8Dave just for your info adjusting the valve took the code away. So in future if u get the same code first thing u do is try to adjust the valve like u did in the vid. My valve wasn’t even making rattling noise like yours did. I was literally gonna order the headers and eliminate the valve cuz that check engine light was so annoying but thanks god shits fixed now.

Good job.....wish you pointed out the nuts with a thin screwdriver first that way people could see it all......your hands are in the way of the actual process....and also would have been good if you showed actual position of cable properly vs improperly. But an A for effort and A- for video........Overall excellent.

@Obliter8Dave

3 жыл бұрын

Thanks for the input! The correct position of the cable is shown on the service manual screenshot... I do understand it takes a little interpretation versus being able to see first hand. Things for me to think about the next time I make a video!

@hansgruber999

3 жыл бұрын

@@Obliter8Dave Hey I commend your efforts and i actually learned a lot because my 2020 gsxr1000 makes that ticking noise so because of you I'll be doing the fix.....Thank you!

What happens if you have it set to be always open?

@Obliter8Dave

3 жыл бұрын

My guess is you will lose power on the bottom end of your power curve. The purpose of the valve is to increase the volume of exhaust gas able to travel out the headers as you increase rpms.

What are you running for tires?

@Obliter8Dave

3 жыл бұрын

Michelin Pilot Road 5's

@hansgruber999

3 жыл бұрын

@@Obliter8Dave Just hard the Bridgestone RS-11's .....good tires last about 6500 miles......thats no track days. Never ran a Michelin tire before.

@Obliter8Dave

3 жыл бұрын

@@hansgruber999 The last set of Road 5's lasted just about 11,000 miles on both front and rear with one track day, canyon riding (about once every few weeks) as well as daily commute... in both wet and dry weather. Now just put on a set of Power 5's... will make a video comparison on wear and performance when they wear out.

@elonmust7470

9 ай бұрын

Jeez, I can finish a set of battleaxe rs 11 tires in under 2k miles of street riding. Maybe y'all need mopeds instead of supersports lol.

I tryed takin the screw off and now it's throw code when I tightened everything

@Obliter8Dave

2 жыл бұрын

Which screw did you remove?

do you know why that thing making rattling noise??

@Obliter8Dave

3 жыл бұрын

Yes. It is rattling since the cable is slightly loose and the cover on the crossover on the header is vibrating.

@gixxerwes9164

3 жыл бұрын

Motomachine got it! btw do u have instagram or any social media? i would like to ask some questions about installing autoblip since we got the same exact bike haha

@irf888

3 жыл бұрын

Hi. I disagree - see my earlier post for what I believe is causing the rattle.

@Obliter8Dave

3 жыл бұрын

@@gixxerwes9164 @moto._.machine

@Obliter8Dave

3 жыл бұрын

@@irf888 you may be right. I am getting my information from Brock's Performance (video link in description) on what causes the rattle.

Hello, I’m trying to install a OEM quickshifter in q Suzuki gsxr1000 ( not R model ) how can I do it? I don’t wanna use a FT quickshifter I wanna use the OEM ?

@Obliter8Dave

2 жыл бұрын

Install will be just about the same as the FT quickshifter.

This better be my issue and nothing major lol 18 gixx

Why not just remove it

You get rid of the noise by trashing the valve & getting a full exhaust...

@Obliter8Dave

9 ай бұрын

Lol yes, that too... my way is cheaper