It would be great if you can select to have only a 2 point loss. You basically can have that, but the text you read for capital A and capital B is very small unlike the large bold 4 point text. Any time I have every suggested useful thinsg for technicians, you don't listen.

@waltheryvancorman6388

4 жыл бұрын

En español pes

Question regarding the graph. I understand the bottom of the graph represents the footages. What does the left side represent?

good

@KevinPeres

4 ай бұрын

Thank you

Hi Kevin, Thank you for your videos.. for the 4 point marker.. does it only be set for the 1550 or both 1310 and 1550. My range is usually no longer than 1000ft. Thanks

@KevinPeres

3 жыл бұрын

Yes when measuring in real time you can only send one wavelength. Start with 1550 if it passes than 1310 should be fine. It will have higher loss but that is expected. If 1550 looks bad than check 1310 if 1310 is better you have a fiber management issue. You can toggle back and forth between 1410 and 1550 but keep in mind 1310 may require a longer pulse width to accommodate extra loss.

@christopherortiz8713

3 жыл бұрын

Thank you for your feedback. Will keep that in mind.

Hello, thanks for the video, I have just 1 question. Could you please explain why is the 4-Point event loss BEFORE cleaning lower than AFTER cleaning? With clean connector, I would expect lower loss and also lower reflectance...

@KevinPeres

4 жыл бұрын

Great question and a super simple answer. I did not take enough care to clean the connection. I used a one click and I did not really take much care. Ideally I would take my time, inspect and clean but for this training it was not important enough to add extra time to the video which resulted in not the most ideal cleaning.

Hi Kevin, great video! So, this method is just to confirm if both reflective/non reflective event is a macro bend or a connector/splice. Am I right

Hi Kevin, what the latest Model in the EXFO OTDR series for last mile testing OTDR/ iOLM test

@KevinPeres

6 ай бұрын

Hello sir. The MAX-715D version

@MSB1180

6 ай бұрын

@@KevinPeres thanks

@MSB1180

6 ай бұрын

@KevinPeres Sir, we are currently using FTB-2 Pro. Can we know the difference MAX-715D and FTB-2 Pro

Bonjour monsieur PERES, Je vous remercie de vos explications concernant l'OTDR.si vous pouvez me mettre quelques explications en français.encore merci beaucoup👍👍👍

@KevinPeres

4 жыл бұрын

Je parle une deuxième langue mais ce n'est pas le français. Je travaille pour une entreprise canadienne-française. Faites-moi savoir si vous avez besoin d'un enseignement en français et nous vous accommoderons sûrement!

@Gigigigi-qx3vg

4 жыл бұрын

Bonjour monsieur PERES, J'aime regardé votre vidéo qui explique les affaiblissements des événements sur 4 point marker otdr et la vidéo expliquant le lissage entre impulsion et temps. Si je peux avoir une traduction des deux vidéo en français,je serais le technicien le plus heureux grâce à vous. Merci beaucoup et continuer ainsi

@KevinPeres

4 жыл бұрын

@@Gigigigi-qx3vg J'aurais aimé parler français, mon entreprise est du Québec au Canada et ils parlent français, mais pas moi. Je parle encore 2 langues mais malheureusement le français n'est pas la seconde.

@Gigigigi-qx3vg

4 жыл бұрын

@@KevinPeres ,c'est avec grand plaisir que,j'ai lu votre message.Celà me fait énormément plaisir,je vous comprends, je serai aussi preneur en sous titrage en français. Continuer comme ça et grand merci à vous et votre équipe.vive la fibre cordialement Gigi

Sir can we remove the 4 points marker from our trace

@KevinPeres

2 жыл бұрын

On the OTDR? Just move it outside the trace. Is it getting in the way ?

did any emulator application for OTDR to can work in computer for test and learning

@KevinPeres

4 жыл бұрын

No unfortunately not. I thought about putting out together. If I do I will post a link for you

@fazalsubhantechnicalchannel

2 жыл бұрын

Ok sir thank you can you send me your WhatsApp number

why is the result of splesing event loss the result is minus in otdr

@KevinPeres

2 жыл бұрын

Great question my friend. I cover this in another video kzread.info/dash/bejne/epN8pNl_o5vIlJs.html this is called a gainer and is often from a Mode Field Diameter miss-match

@Fajardani88

2 жыл бұрын

@@KevinPeres thanks mr

How to define a good reflection index? And what happen when reflection is so low or so high? Thanks !

@KevinPeres

2 жыл бұрын

If you are talking about Reflection from a connector typically see -45 to -50dB as acceptable Pass-Fail values. UPC connectors are -50 to -55dB at spec and APC -65dB or better. We start to see issues if we are worse than -40dB and if there is amplification of the signal it can be compounded.

hello, plz cloud you give me why to see fail when finish test

@KevinPeres

2 жыл бұрын

I use a demo network when I am doing videos and have a lot of fails intentionally.

Not show this explanation on screen we can not see the coser

@nileshjaiswal4478

4 жыл бұрын

Hindi plz

Instead of explaining the 4-point loss & settings in details, you had spent more time on OTDR test settings.... :(

@KevinPeres

4 жыл бұрын

I will take a look at the video again. Setup is a big part of understanding optimizing 4 point measurement in real time. May be I can streamline that section a little more. I catered it to techs like myself at the time who worked in very restricted circumstances that required quick analysis.

सर ये वीडियो हिंदी मैं डाल दो