Me gustan tus videos mi causa . Espero no termines nunca de bajar contenido . Saludos desde Perú

I have taught myself solidworks and your videos really help me, as they show me tools and provide paths I didn’t know about for tackling more complex modeling

@EasyCADSolutions

Жыл бұрын

I am glad to hear this Thanks 👍

You're the best, good work, thanks for teaching us.

@EasyCADSolutions

Жыл бұрын

Thank you and Welcome 🤗

That was handy. Thank you!

@EasyCADSolutions

8 күн бұрын

Welcome 🤗 For any queries contact me via WhatsApp +919793662583 or mail me at nishant13071992@gmail.com

Great video! Thank you! I keep learning SolidWorks and this channel is really great! Subscribed and loaded my "like-gun".

@EasyCADSolutions

11 ай бұрын

Thanks 🙏 And, Welcome 🤗

You are an amazing person, please keep going, we are learning from you and using your skills ❤️❤❤

@EasyCADSolutions

Жыл бұрын

I am glad to hear this 🤗 Thank You 😊👍

@EasyCADSolutions You are a very enthusiastic person, all works are works of art, let me also gain a lot of knowledge, you are the male god in my mind, thank you!

@EasyCADSolutions

Жыл бұрын

Thank you for your valuable insight And, Thank you for watching my videos

Thanks for making this great tutorial. Unwrap/flatten surface was new for me..

@EasyCADSolutions

4 ай бұрын

Welcome 🤗

Wrapping curve to curve is the goal for justify a planning surface pattern, very strong proceed. Thanks a lot.

@EasyCADSolutions

5 ай бұрын

Welcome 🙏

Muy bueno!! Espero que sigas subiendo mas videos. Saludos

@EasyCADSolutions

Жыл бұрын

Thanks for watching 🤗

great sir!

@EasyCADSolutions

22 күн бұрын

Thank You 🙏

great tutorial!

@EasyCADSolutions

Жыл бұрын

Thank You 😊

So tricky what you did there, super nice and creative, thank you to share this trick with us 💚💚

@EasyCADSolutions

7 ай бұрын

I am glad to hear this Welcome 🤗

Thank for the video help and good job bro

@EasyCADSolutions

Жыл бұрын

Welcome 🤗

Amazing method

@EasyCADSolutions

Жыл бұрын

Thanks 👍

thanks for this great tutorial. we all learn a lot from you

@Starnuti3d

Жыл бұрын

Yes me too

@SodikTube

Жыл бұрын

I learned a lot

@dodolgarut4779

Жыл бұрын

❤❤❤❤

@EasyCADSolutions

Жыл бұрын

Thanks You to All🙏

And done all without saving the part file once, well done!

@EasyCADSolutions

Жыл бұрын

Thanks 👍

Very good 👍👌

@EasyCADSolutions

Жыл бұрын

Thanks 👍

Respect 👏

@EasyCADSolutions

Жыл бұрын

Thanks 👍

nice learning lots of things

@EasyCADSolutions

4 ай бұрын

Thank you 👍

Very, very good

@EasyCADSolutions

Жыл бұрын

Thanks 👍

Appreciate ❤❤❤

@EasyCADSolutions

Жыл бұрын

Thanks 👍

Thanks a lot

@EasyCADSolutions

9 ай бұрын

Welcome 🤗

Супер!!!

@EasyCADSolutions

Жыл бұрын

Thanks 👍

Genial !!!

@EasyCADSolutions

11 ай бұрын

Thanks 👍

good video card

@EasyCADSolutions

11 ай бұрын

👍

i learned a lot❤ I want to know how to be as good as you😂

@EasyCADSolutions

Жыл бұрын

Thanks 👍 Practice Practice and Practice by yourself

Thank you for your videos EasyCAD. However when I tried the wrap feature with emboss it showed me that that will result to zero thickness geometry. How can I solve this

@EasyCADSolutions

Жыл бұрын

Sometimes it happened with Solidworks try to make it again in a new part file with the exact steps

Very nice! Only problem is for me I use SW Professional which unfortunately doesn’t have Surface Flatten feature… As I understand it is only available in SW Premium, correct?

@EasyCADSolutions

Жыл бұрын

Thanks 👍 And, Yes you are correct

Дуже корисне відео. Дякую!

@EasyCADSolutions

10 ай бұрын

Welcome 😊

Great work, is there a way to add draft to the embossed features? I am trying to cut angled slots with draft on a hammer handle grip.

@EasyCADSolutions

6 ай бұрын

What kind of pattern are you trying to do on a hammer?

@JimAikins-ib6mh

6 ай бұрын

@@EasyCADSolutions I can send you a surface model that I received that I will eventually need to replicate, it seems simple but wrap command, deform etc. doesn't end up looking the same and with no draft from my attempts.

@EasyCADSolutions

3 ай бұрын

You can send me the model on my WhatsApp number +919793662583

hy. can you share how to create Lure Fishing. like hollow body frog maybe . Thanks

@EasyCADSolutions

Жыл бұрын

I will try to make such Videos

@dvcrafter

Жыл бұрын

@@EasyCADSolutions wow.. that would be very interesting. I will wait . thank you

Hi, nice work, but is there another method than "Wrap" that gives the same result? By same result I mean each texture element is straight to its base and equal to other textures. I tried to create dual surfaces & split them

@EasyCADSolutions

2 ай бұрын

Thanks for commenting but please elaborate more because i am not getting what you are trying to say

@webandmedialb

2 ай бұрын

@@EasyCADSolutions Sorry for the confusion, the problem with "wrap" is that you can use only once on a surface and you have to be very careful in placing it, in your example it works fine. In some cases I had to do several extrude process and slice them with surfaces to work. This is a 3rd method - Check this made in Creo at minute 20 kzread.info/dash/bejne/pKSruJWlgc23nrg.html

@EasyCADSolutions

2 ай бұрын

I have seen the video and it looks similar. It follows my video and makes it in creo

I reminded this is same lightsaber.

The following content is converted into English using Google Translate. Please forgive me if the text does not make sense! Hello, I am a viewer from the Chinese area. I saw that you shared the amazing drawing file of Ren. I also tried to do it myself. I encountered the following difficulties. I hope to get your answers. When I use the "flatten surface" command and the "Fill Pattern" command on this plane, I draw a group of symmetrical hexagonal figures, but when I use the "Wrap" command, this group of hexagonal figures no longer Symmetry, based on the plane where the handle ridge is located, the center of the first hexagon in the front has no deviation from this plane, but the center of the first hexagon in the back is 1mm away from this plane. I would like to ask if this deviation is a common phenomenon after using the "Wrap" command? Or is there any flaw in my drawing process? Hope to get your insights on this matter, thank you!!

@EasyCADSolutions

29 күн бұрын

First of all thanks for your efforts to make a comment. But unfortunately I didn't understand well

@user-go5ts8em5s

29 күн бұрын

@@EasyCADSolutions I used the "Fill Pattern" command on the plane generated by the "flatten surface" command to draw a group of symmetrical hexagonal figures. But when I used the "Wrap" command to fit the hexagons to the surface, the group of hexagonal shapes became no longer symmetrical. I would like to ask if this deviation is a common phenomenon after using the "Wrap" command? Or is there any flaw in my drawing process? I hope the revised text can help you understand what I mean!! Hope to get your insights on this matter, thank you!!

@EasyCADSolutions

28 күн бұрын

Wrap can cause distortion There is no flaw in your design process For more queries contact me via WhatsApp. +919793662583

@user-go5ts8em5s

28 күн бұрын

@@EasyCADSolutions thank you

Unfortunately the option Surface Flatten is unavailable in SolidWorks Professional 2018.

@EasyCADSolutions

Жыл бұрын

Yes, it's unavailable in Solidworks Professional 2018

How many bodies are left in solid bodies folder? In my solid bodies foler of features manager tree, 2 bodies can be seen.I would like to know it right is?

@EasyCADSolutions

3 ай бұрын

If more than one body is left then simply use the Delete and Keep Body feature. Click on the solid body which you need and select the keep body option and hit okay. So that only that selected body will be kept and rest all other solid and surface bodies get deleted

@SithuLwin-br9hg

3 ай бұрын

@@EasyCADSolutions Thank you.

hello,thanks your teaching,but I have a question,why I can't used wrap,I setting 1.00mm, and system can't calculate,my pool English fromTaiwan,hope you can answer me,thanks！

@EasyCADSolutions

7 ай бұрын

Sometimes it happens in solidworks Try again or try to increase the margins in fill pattern

So upset: we only have the Professional version of solid works so i can't use the "flatten surface" feature 😢. Maybe I'll do this exercise with 3D experience home just to learn...

@EasyCADSolutions

Ай бұрын

Yes, in the professional version some features are not active, Yes you can try in 3D Experience home For more Queries and Suggestions contact me via WhatsApp +919793662583

step one: do it in Rhino

@EasyCADSolutions

8 ай бұрын

Thanks for your suggestion

Study time…

@EasyCADSolutions

9 ай бұрын

👍

This technique is outdated. Now we can draw a 2D image of any object and the application will generate its 3D counterpart automatically with the highest precision that cannot be achieved manually.

@EasyCADSolutions

Жыл бұрын

What software or apps are used to make such parts? Please share it here I am eagerly waiting for your comment

Been following your tutorials with a passion. When applying the wrap feature with the created sketch, for the life of me, i can't select the face on the body... I try to SELECT OTHER command and it still, won't select, thus i am unable to get past it... any ideas what causes this issue? /sw2022 premium SP3.1

@EasyCADSolutions

Жыл бұрын

Try to recreate the model and apply the same may solve your problem

@hyper_active_snail

Жыл бұрын

Roger that boss, will do

terribly convoluted, but thanks for sharing.

@EasyCADSolutions

Жыл бұрын

Most Welcome 🤗