Thank you for transferring this amazing technology along with Grobe G 120TP to Bangladesh Air Force 🇧🇩.
@LifeOnTheHulls3 жыл бұрын
Absolutely brilliant craftsmanship.
@MrUltracoin9 жыл бұрын
Amazing!!!
@almo21547 жыл бұрын
love it ❤
@dr.mohammedalaqeeli29564 ай бұрын
Good
@SGCONLINE3 жыл бұрын
thanks very good
@reginaldhuckstable97972 жыл бұрын
Wonder what kinda of paste adhesive they use. Must not be worried about all the extra squeeze out in between those rib stiffeners. After a while vibration and turbulence can knock big chunks of that loose then you’ll have serious FOD floating around.
@jj4791
2 жыл бұрын
Most adhesive pastes are going to be some form of filled and toughened epoxy. The adhesive bead diameter is usually tested on many samples to see how much is needed to ensure a good bond with minimal squeezed out, and how much pressure to apply via clamping or vacuum bag. And aircraft production lines are going to use that specified amount of adhesive. Generally, blind adhesion joints are disliked by both engineers, manufacturing, and QC staff. But there aren't many ways to effectively eliminate them. So they place them non-critical or less critical areas. E.g. lower wing skin to spar and ribs, where air pressure at maximum loading is positive, not on upper skins to spar. Where air pressure is negative and might rip the skin lose.
@SuperKillroy111 жыл бұрын
I like the overalls. Reminds me of of Oompa-Lumpas.
@singhbrijesh34723 жыл бұрын
Can I know about the adhesive using in joining....please
@maxmuller294410 жыл бұрын
Wird das g180Spn prjekt weiterverfolgt
@constantinh3187
2 жыл бұрын
nein
@guitarttimman10 жыл бұрын
I could take this to the next level, but refuse to share knowledge with malevolent! If mankind weren't, then why so many starving? I don't want to create a dictator.
@user-qp3hd3cn8e
6 жыл бұрын
four years later
@Joaking91
3 жыл бұрын
Sir, this is a Wendy's
@guitarttimman
3 жыл бұрын
@@Joaking91 Even so. Look at the technology that goes into building such places. Certainly, the technicians are the crafts people, but, many times, not always, it is the evil ones who own such places. Who should be running our world? Kind geniuses who are vegans. The fact that it is a meat frying market alone makes it evil.
@Joaking91
3 жыл бұрын
@@guitarttimman ok i can get behind that. I mean, im a socialist ffs
@Pushyhog4 жыл бұрын
Big time factory.
@k.ganesanganesan68257 жыл бұрын
problem solver in material science
@C4GIF5 жыл бұрын
Das muss automatisch und reproduzierbar in Serienfertigung wie beim Ärbus. Dann wird dat!
@nacholr223 жыл бұрын
lo vi por que me obligaron
@Joaking91
3 жыл бұрын
Suerte en el parcial!
@leloodallasmultipass8 жыл бұрын
My company has much better GROB technology than these clowns.
Пікірлер: 26
Thank you for transferring this amazing technology along with Grobe G 120TP to Bangladesh Air Force 🇧🇩.
Absolutely brilliant craftsmanship.
Amazing!!!
love it ❤
Good
thanks very good
Wonder what kinda of paste adhesive they use. Must not be worried about all the extra squeeze out in between those rib stiffeners. After a while vibration and turbulence can knock big chunks of that loose then you’ll have serious FOD floating around.
@jj4791
2 жыл бұрын
Most adhesive pastes are going to be some form of filled and toughened epoxy. The adhesive bead diameter is usually tested on many samples to see how much is needed to ensure a good bond with minimal squeezed out, and how much pressure to apply via clamping or vacuum bag. And aircraft production lines are going to use that specified amount of adhesive. Generally, blind adhesion joints are disliked by both engineers, manufacturing, and QC staff. But there aren't many ways to effectively eliminate them. So they place them non-critical or less critical areas. E.g. lower wing skin to spar and ribs, where air pressure at maximum loading is positive, not on upper skins to spar. Where air pressure is negative and might rip the skin lose.
I like the overalls. Reminds me of of Oompa-Lumpas.
Can I know about the adhesive using in joining....please
Wird das g180Spn prjekt weiterverfolgt
@constantinh3187
2 жыл бұрын
nein
I could take this to the next level, but refuse to share knowledge with malevolent! If mankind weren't, then why so many starving? I don't want to create a dictator.
@user-qp3hd3cn8e
6 жыл бұрын
four years later
@Joaking91
3 жыл бұрын
Sir, this is a Wendy's
@guitarttimman
3 жыл бұрын
@@Joaking91 Even so. Look at the technology that goes into building such places. Certainly, the technicians are the crafts people, but, many times, not always, it is the evil ones who own such places. Who should be running our world? Kind geniuses who are vegans. The fact that it is a meat frying market alone makes it evil.
@Joaking91
3 жыл бұрын
@@guitarttimman ok i can get behind that. I mean, im a socialist ffs
Big time factory.
problem solver in material science
Das muss automatisch und reproduzierbar in Serienfertigung wie beim Ärbus. Dann wird dat!
lo vi por que me obligaron
@Joaking91
3 жыл бұрын
Suerte en el parcial!
My company has much better GROB technology than these clowns.
@constantinh3187
3 жыл бұрын
oh your company doffus.inc?
@constantinh3187
2 жыл бұрын
thats what I call jealousy