I know it’s been uploaded for a while, but I’ve been interested in the Tracks and this is the ONLY vid I found that demonstrates setting the bpm/tempo. Thank you so much, I hate no-screen devices that expect you to just turn a knob and get the right tempo, so this just about cements the deal for me.

@isaachorgan

7 күн бұрын

hey! glad i could help. have fun with the tracks, if you do get one.

Thanks mate this tutorial I definitely benefited more than the other tutorials on KZread. You're workflow tempo you chose to explain features and parameters was brilliant.

@isaachorgan

4 ай бұрын

much appreciated, thanks for your comment

You're an amazing teacher, thank you.

@isaachorgan

Жыл бұрын

thankyou!

Well done. There were several useful hints I learnt from this video.

@isaachorgan

2 ай бұрын

thanks for your comment. glad to hear that 😊

Great video. Had no idea how to change the volume of the click, so thank you!

@isaachorgan

2 жыл бұрын

i've literally never seen anyone mention that in a tutorial or anything lol. it's such a tiny obscure little feature but it's pretty useful to know. thanks for the comment!

Thank you, pretty helpful. Most useful information compressed relativity short. Ty, I learnt a lot. 🎉

@isaachorgan

5 ай бұрын

thanks for your comment!

Mate, you are making such helpful content on your channel! So valuable to see in depth how the CT works, really helping me out in deciding if it is the right next bit of gear for me, which after watching your vids, I think it just may be! Thanks so much, I'll be back to watch again if/when I actually get one!

@isaachorgan

Жыл бұрын

hey! thanks for the comment:) let me know if you have any questions - i'd love to get back into some CT content!

@samb2538

Жыл бұрын

@@isaachorgan no worries, I shall do mate.

I don't have one of these, but damn... what a great, concise tutorial 🥇

@isaachorgan

3 ай бұрын

thanks for watching :)

My fav circuit track -intro. JAYZ song - what the hell you re waiting for

great tutorial thankyou

@isaachorgan

2 жыл бұрын

thanks!! glad to hear it:)

Thank you for this video! Super helpful

@isaachorgan

7 ай бұрын

thanks for your comment!

Very clear

@isaachorgan

Жыл бұрын

thanks!!

Thank you. This was very helpful. But I don’t understand what the labels underneath the knobs describe. I didn’t see a demo of Amp Envelope for example. Then there’s Oscillator and Oscillator Mod etc What are those about?

@isaachorgan

2 жыл бұрын

every synth preset will require different parameters to adjust, but novation have put labels as suggestions for preset designers. so each knob will have a different effect on different presets. amp envelope controls the volume over time; on a "pad" sound it might control how slowly the sound fades on over time, or on a bass it might control how short each note is. oscillator and oscillator mod are the two that are always going to be very different - there are countless parameters that the preset designer could assign these to. for example it could change the sound of an oscillator, or the pitch, or the mix between two different oscillators. unfortunately these two will just require some experimentation to figure out. hopefully that makes sense, i should've made it more clear in the video. if the problem is that you don't know some of these synth-related terms, i have another video that might help called "fundamental sound design." thanks for your comment:)

How do I delete notes from a project that is already on tracks circuit

@isaachorgan

3 ай бұрын

hey, you should just be able to open the project, select the track, and then use the clear button to clear notes from the sequence!

Can I connect a LAUNCHKEY MK3 25 midi keyboard to the CIRCUIT TRACKS device and use the sounds of the CIRCUIT? and play the keyboard too. If so, what connections are recommended and needed to connect them together?

@isaachorgan

Жыл бұрын

if the launchkey mk3 25 has a midi-din output, then yes. just plug it into the midi input on circuit tracks. if the keyboard is only usb, you may like to try plugging it into the usb on the circuit tracks. this probably wont work, but i've never tried it so im not sure. be careful with this. the safest option is to get a midi interface that converts usb midi to din midi - loopop has a good video about midi interfaces. i hope this was helpful:)

@Rafix-drummer

Жыл бұрын

@@isaachorgan thanks bro

A question for the experts. Can I download external sounds to the computer and transfer them to the device? to CIRCUIT TRACKS? If so how can it be done. Another question - can I connect external sounds from a synthetic device or electronic drums directly to the CIRCUIT TRACKS device and save them on the device? Thank you .

@isaachorgan

Жыл бұрын

hey! 1: yes, you can put samples onto your circuit tracks. use the novation components software, and go to the samples tab. upload your samples into the slots, and send to circuit. then you can use the sounds in the drum 1 - drum 4 tracks. 2: no, there is no way to sample directly into the circuit tracks. you can use the 2 inputs to put live audio into the circuit and then use them in the mixer/fx. however, you cannot sample aka "save sounds" from the inputs. you would have to record sounds in another way and then use a computer to put them into your circuit, as i described above. thanks for the questions!

@Rafix-drummer

Жыл бұрын

@@isaachorgan thanks bro

@LikeCarpenter

Жыл бұрын

Do you have to format an sd card before you put into the tracks

@isaachorgan

Жыл бұрын

@@LikeCarpenter i don't think so - i definitely didn't. i believe the device formats the sd card on it's own, so be careful to use a new sd card or backup old files