Having sanded and glassed about 5k boards in my time all done with a vary speed sander polisher i can confirm its the tool for the job .I custom adjusted my sanding pads to add a slight curve to stop edge catching .Rails i did by hand 60 grit then a soft pad 2 interface pads on the sander slower speed .When your working on piece work A fixed price per board getting it done quickly is paramount .On filters i used 3M vapour for glassing and switched to my own made dust filters by taking the vapour cartridge apart and and tripe ling up with particle filter pads inside .When your sanding all day even with a 2 foot extractor fan in the room its dusty .Great video .Retired now haven't sanded a board for 12 years now .PS i was the first in uk to trial the auto net Velcro sanding discs they are way better than paper especially where polishing is concerned as there are no stray bigger grit than stated partials plus there way faster .

@RockandSeaGarageBoardShop

9 сағат бұрын

Very nice! 5K boards is a serious notch to have under your belt! Also very cool on your dust filter setup, I just bought a new dust extractor and am going to do a cool buildout video, designing system now. It’s funny how interesting dust extraction can be

came for the resin eating stayed for the board making GOLD! HILLARIOUS

thanks for this content!

I never knew about the particulate cartridges, after years of browsing shaping vids.👍

@RockandSeaGarageBoardShop

9 ай бұрын

Right?! When I started there just wasn’t a ton of clear info out there about shaping tools and respirators etc!!! I shaped a handful of boards wearing the wrong PPE so passing on the info!

Resin eating reminds me of a friend that told me that “you can’t truly know your board until you’ve slept together”. Not sure if he was serious or not. 🤔😆

@RockandSeaGarageBoardShop

13 күн бұрын

Very serious, of the upmost seriousness h 😂 🙌

Brilliant!

Very Interesting 🙌

Loool funny intro 🤣 Im gonna start shaping soon. Watching your videos give me motivation. Cheers from french brittany

@RockandSeaGarageBoardShop

2 жыл бұрын

Heck ya! That’s what I like to hear! Cheers from SoCal! Good luck out there!

At the boat yard we use the festools a lot. Really good tool.

@RockandSeaGarageBoardShop

Жыл бұрын

Seriously they make such good tools, I love them! Looking forward to getting more of their tools in the future

great video, thanks for sharing the info. how many slinky hoses do you use, to have it connected to your vacuum and connected above? 1 or 2?

@RockandSeaGarageBoardShop

Жыл бұрын

I have two hoses connected to get enough length, the hose runs up to my ceiling and then the back down the wall to the vacuum🙌

So I can use syrup instead of resin? Nice!!! Going pure Canadian maple on that glass lol

@RockandSeaGarageBoardShop

2 жыл бұрын

Syrup makes for the strongest boards 😂😂!

Thanks for all of your videos. Would I run into any issues using my ryobi cordless orbital sander? Trying to leverage my wood working tools if possible

@RockandSeaGarageBoardShop

Жыл бұрын

Oh no! Absolutely will work great! In fact I would love to get some cordless tools, so nice to not have power cords! The only downside is not being hooked up to a shop vac for dust control. Feel free to reach out if you have any more questions!

bwhahaha! love it!🤣

That Festool sander is really nice. I've used it. The Bosch sander is also amazing and I've used it heavily for years without issues. Festool stuff is amazing. Problem is that it's kind of like an apple product. You have to use all the products within that brands family to get the most out of it. It's like you're joining a club and then you're stuck in it. Thanks for fun video.

@RockandSeaGarageBoardShop

Жыл бұрын

Hey thanks for the insight Robert, I LOVE obsessing over tools! I really like the looks of the Bosch and have been wanting to try it out. I definitely get the feeling they have their own ecosystem for products and accessories etc…, all at top dollar, love their sander though! Robert what is your go to san paper? I’ve been trying out a bunch of different sanding screens and holed sand papers, I really like Mirka but always searching for alternatives

@michaelfox6367

8 ай бұрын

Any ideal what model bosch? Having a hard time finding a bosch disk sander w/ vaccuum attachment

@RockandSeaGarageBoardShop

8 ай бұрын

@michaelfox6367 here she is! amzn.to/3tqje9t

Thanks for the video. What grit stages do you go through when you are glassing the boards?

@RockandSeaGarageBoardShop

Жыл бұрын

Hey happy it was helpful, Just spreading the knowledge and stoke! I typically start at 120, most of my time is spent here rough sanding the board, maybe 60% of my time is spent on this grit, then bump up to 180 to get any visible sanding swirls out, probably spend 20% of my sanding time on this step, then a quick buff with 220 and then 320 to get her super slick, 10% time spent on each of these grits👍. Like and subscribe to help grow the channel!

@crashkg

Жыл бұрын

@@RockandSeaGarageBoardShop Thanks!

Very helpful. 1 question, for your hotcoats do you add wax in styrene to laminating resin or do you buy specific filler resin? Cheers from Australia. 🤙🏻

@RockandSeaGarageBoardShop

Жыл бұрын

Cheers to Ozzy friends! Depends… so for poly resin you can either buy resin that already has the wax additive, usually it’s called “sanding resin” or “hot coat” resin, some companies refer to their normal resin without the wax additive as “lamination resin”. For epoxy though at least here stateside pretty much all the epoxy brands out there just sell plain epoxy without the wax/styrene additive, you pretty much always have to buy it. It’s commonly called “additive F”. Hope this helps! Like and subscribe to support the channel!

@chrismorton1725

Жыл бұрын

@@RockandSeaGarageBoardShop Amazing thanks. 100% already subbed. Keen supporter of the channel. Loving your vids. ✌🏻

I bought a porter cable orbital sander and I've never used one? Is there a specific way I should sand (flat, on angle)? It doesn't have variable settings so it's one speed. I tried using it to sand a ding on an older board I have laying around and the sandpaper went into the ding and ripped off.

@RockandSeaGarageBoardShop

Жыл бұрын

Hey don't feel bad, everyone rips paper into a ding from time to time, especially a jagged one, myself included 😂👍. I sand at a slight angle typically for dings, its hard to describe, but if the ding is a vertical crack I sand perpendicular to it, so the sand paper disc is sanding from left side, over the crack, and then onto the right side. If you sand parallel with the sanding pad spinning parallel it's easy for the sanding paper to travel along the crack and get caught ripping off at the end of the ding. Hope this helps!

But does the poisonous things in the air that come from the board just go away or do I always have to wear a mask when I go inside?

@RockandSeaGarageBoardShop

Жыл бұрын

Very good question, just when the dust is disturbed and floating around you need a mask. It will settle down onto the ground and then you can either vacuum it up or sweep it up, wear a mask while cleaning as well as you might be disturbing it and get it floating around in the air. But generally speaking as long as it has settled a couple minutes after sanding you don’t need to wear one

Acetone isn't especially toxic - it's used in tons of household products and even stuff like nail polish remover. And the amount absorbed through your hands is negligible. It does however tend to dry out an irritate your hands.

@RockandSeaGarageBoardShop

Жыл бұрын

That makes me feel a little better, I’m not a scientist, but rumor is among glassers that acetone serves as a vector to transport resin molecules into your bloodstream, poly resin is pretty nasty stuff. Couldn’t confirm or deny this rumor, but still better safe than sorry

@maxcalabrese5962

Жыл бұрын

@@RockandSeaGarageBoardShop I would be more worried about resin and fiberglass dust entering your airways when your not wearing a mask like when cleaning up. While epoxy/poly probably isn't great for your skin it being absorbed into the bloodstream sounds unlikely. Especially since you're gonna be wearing gloves anyways since it's so damn hard to get clean.

@RockandSeaGarageBoardShop

Жыл бұрын

Your making me feel safer, I love making boards, such a cool art form, always try to limit my exposure to junk, would be a really bummer to sacrifice your health for it. I feel bad for all the old school original guys that didn’t wear PPE … there is some old shaper/sander quote somewhere that says something like “I don’t need a mask, just use the filter on my cigarette” 😳

Uauauauaua 🤣🤣👍

@RockandSeaGarageBoardShop

Жыл бұрын

😂😂🙌🙌

Hook and loop, we now live in the 21st century

The resin scene had me shook

@RockandSeaGarageBoardShop

2 жыл бұрын

Awesome, thats what we are going for 🤣, Every time I watch it im shocked again

@deathtrapgonzo7141

2 жыл бұрын

@@RockandSeaGarageBoardShop 😂

At first I thought you were cutting the glass with a jigsaw 😂. Seriously though what is that thing??

@RockandSeaGarageBoardShop

2 жыл бұрын

😂😂, I could see the misunderstanding. These are just cheapo’s, there are fancy ones out there but they cost 3-4x. I like these little guys smile.amazon.com/dp/B08D9CSD24/ref=cm_sw_r_cp_api_i_dl_CZER9FG4P96M1KF797GY

Licking the fiberglass💀💀💀

wow the resin eating is so disturbing, shocked for a few moments haha

Ahhh I just ate resin

@RockandSeaGarageBoardShop

2 жыл бұрын

Noooo! No eat resin!! Board need resin, you make board sad 😂😂