Thank you Ol’ buddy! Much appreciated 👍👍👍

I use scrap 1 1/2" angle iron. If a person doesn't have access to scrap, they can check scrap yards and they'll sell it by the pound. Lowes and Home Depot have short pieces that aren't too expensive. I then cut 2" PVC in the lengths that I need (12" to 18" is usually enough) and fasten to the inside of the angle iron with 2 hose clamps. I leave 1 or 2 inches of angle sticking above the PVC so I can drive it in with a hammer. I also almost always free spool with a clicker using bait casting reels so that I'm not worrying about my rod going for a swim. On casting reels, if it doesn't have a loud clicker then I don't buy it. On spinning reels I just leave the drag real loose and hope for the best. I caught a 22lb carp this year that spooled me before I noticed and grabbed it. I had a good knot on the spool or she would have been dragging a bunch of 35lb braided fishing line around behind her! That was too close! It was a bait feeder reel so as soon as I hit the crank it locked down and the fight was on. But she'd gone way up river and I got to run her down while I reeled. I'm too old to be running up and down river banks anymore! Thanks for the post man! You have some good ideas and work hard at this and it's evident by the quality of your content. Your content is first rate and hopefully more and more people in our community will discover you. You deserve one of those plaques on your wall!

@FishingWithChris_Tv

2 жыл бұрын

Thanky sir 👍🏼

Excellent good sir! More info in this video than the past 10 I've watched combined. Keep this up & good luck out there brother

@FishingWithChris_Tv

Жыл бұрын

Many thanks sir

I've built rod holders over the years to leave in place. yours with the tpost is a good idea.

Well done Chris! I need to get me some of those Takedown rod holders. Reflective tape very good idea. Currently I have 3 of the Rippin Lips spring rod holders. Love my Rippin Lips rods.

I really like the Muddy River Holders. Being cheap, it’s hard to come up with $20 sometimes. I have made my own with a ozark trails boat rod holder welded to a piece of 3/8 round steel about two and a half to three foot long. They will work for me till I can save up to get a couple of Muddy River. Great video Chris

@FishingWithChris_Tv

2 жыл бұрын

I like your welded idea lol

I was thinking of purchasing the bass pro model and they are sold out of the longer ones so just go to local metal welding shop and add 2ft on to the short one in stock just bolt it on if ever wanted short again just remove added piece

Awesome Explanation Video Thanks!

Thank you much!

Looking till I saw and heard you mention the muddy river rod holders (Takedown Rod holders LLC) and yes that is something I would use and will get a set. Thanks for the help.

@FishingWithChris_Tv

Жыл бұрын

He has a lot more options now.

Thanks for sharing. I hope you have a great 4th of July. And God bless you and your family.....🙏❤🙏❤🙏😊🙂😀

He he 🔥 I'm subscriber number 1000. Congratulations

I was just thinking of making some just like yours with the PVC.

I used the pvc rod holders for years but I bought a couple muddy river holders and live them!!

@FishingWithChris_Tv

2 жыл бұрын

They are solid and the owner/operator is busting his ass for the brand. He does all the work from cutting, to bending, to welding, to shipping. I’m forever sold on them.

@edbrown3047

2 жыл бұрын

@@FishingWithChris_Tv agreed

You can cut 1 1/2 inch pipe at a 45 degree angle

I use PVC pipe one and a half and rebar

I have 7 of the green

Where can I get them

@FishingWithChris_Tv

3 ай бұрын

I can’t with good conscience promote his brand. He’s a crybaby hypocrite. Whisker seeker makes nearly the same design but lighter in weight. Check them out at whiskerseeker.com

Can you send me the link to the rod and reel you mentioned I can't it many thanks. Ricky

@FishingWithChris_Tv

Жыл бұрын

Rippinlips.net or google Rippin Lips catfish rod

Why would you need a rod holder with a bait clicker?

Why use tape

@ohtrxppy8652

21 күн бұрын

On metal ones

@FishingWithChris_Tv

21 күн бұрын

@@ohtrxppy8652 on the TDR holders, extra visibility with a black light, on the fence posts, extra insurance incase the pvc cracks around the bolts.

Or you can literally just drop a piece of PVC 2 inch into the ground without paying these ridiculous prices

@FishingWithChris_Tv

11 ай бұрын

And constantly deal with pvc breaking causing you to lose gear 🙄

@redneck3848

11 ай бұрын

@@FishingWithChris_Tv no you don't I've literally have sharks pulling drag maybe if you've left your PVC pipe out in the sun for 10 years until it's all brittle schedule 40 PVC will not break from a fish common sense sum people don't have yeah if you've got cracks in it from beating on it with a metal object and not pushing it down in the soft mud by hand or not putting a piece of wood on top of the pipe then driving it down you can literally use a short 2x4 and drive them in if you lost gear to lack of common sense then I don't believe anyone should take your advice on rod holders facts!!!

@redneck3848

11 ай бұрын

@@FishingWithChris_Tv yeah I can see you rolling your eyes like a little girl trying to argue with an adult even though you know your wrong and I'm talking to someone that loses their gear because of the lack of common sense LMBO