Click for more info and reviews of this Cruiser License Plates and Frames:
www.etrailer.com/Accessories-...
Check out some similar License Plates and Frames options:
www.etrailer.com/dept-pg-Acce...
www.etrailer.com
Don’t forget to subscribe!
/ etrailertv
Full transcript: www.etrailer.com/tv-Demo-Crui...
Today we're going to take a look at the stainless steel star pin locking fasteners for license plates and frames for a quantity of four. Now, these fasteners will prevent theft of your license plate and license plate train using this locking star pin hardware. It secures the frame and the plate to your vehicle, and each screw head. I'm going to zoom in here so we can see as we talk about it. Each screw head has a star shaped key hole with a pin at the center of it so the screw can be removed only with this included special key. Insert it in there and that'll allow you to tighten it down or remove it; it has the hole in it that'll fit that pin that's in the middle.Now, these are designed for domestic vehicles and motorcycles.
They are standard screws, which will match the diameter of your license plate mounting holes. The screws are at a 1/4" by 14 threads per inch thread size. Does include everything shown here on the table; the four stainless steel screws, the four plastic anchor nuts, and the star pin key. The anchors, these plastic anchors, these would be used if you just have the square holes in your vehicle that these nuts would pop into, and that allows you to thread into that. On some vehicles, you might already have threads in the vehicle that these would thread right into.
That should do it for the review on the stainless steel star pin locking fasteners for license plates and frames.