Hello dear, how did you prepare the images for the laser ? Best regards

What power do you have the laser set on when doing the glass engraving?

So how do I get it to not have that big square and change it to a vector file bro. Thanks for the video

what kind of paper are you using under the phone, i’ve been searching everywhere for it

I cant seem to upload any svg files to the software, it always says “ not responding”

Please help me the machine after pic dont work

Aswell mine is only etching it out and it just makes everything one blob so u cant tell what it is.

@mayaparts1460

4 жыл бұрын

It might have something to do with your image. High-contrast images work best. Ideally, JUST black and white images. The laser is sensitive and will burn anything that it thinks is image data (even light gray tones). If you turn to 4:18 in the video, you can see an example of this. There is a small mark on Kobe's forehead, directly above his eye. That mark was in the original image, but it was so light that I didn't see it. However, the laser saw it and burned it onto the phone.

Is this machine suitable for engraving logos and such on aluminium pieces? Or is it purely designed with Phone repair and engraving in mind?

@mayaparts1460

3 жыл бұрын

These machines are primarily designed for removing back glass from smartphones. But it's basically a printer that uses a laser instead of ink, so you can etch/engrave on just about anything, as long as it's flat and fits under the focus pin. Just be aware that not all surfaces engrave well. Certain textures and reflectivity are resistant to the laser (such as the metal back on the original iPhone SE) and don't allow for clean burns.

hello where i can buy the cable for connecting the machine at the computer?

@mayaparts1460

2 жыл бұрын

We just purchased a generic USB-to-VGA adapter from Amazon. It still uses the built-in computer, but projects the image onto a larger screen.

@migwelmatos

2 жыл бұрын

@@mayaparts1460 thank you

How did you make the language english?

@mayaparts1460

4 жыл бұрын

Please see our channel. We have a video that shows how to change the language.

What it's the format of the image?

@mayaparts1460

3 жыл бұрын

We were using a JPEG. However, I remember seeing an "import vector" option below "import image" in the menu. I'm not sure which vector format it accepts (since we no longer carry the machine), but that might be a better solution than a standard image since light-colored jpeg artifacts can still show up in the final burn.

My laser doestn work only makes a sound when i hit mark

@mayaparts1460

4 жыл бұрын

Does this only happen when trying to etch images? Or is it also failing with back glass removal?

@JustMe-pi7fq

4 жыл бұрын

@@mayaparts1460 back glass removal works perfect but logo engraving isnt working only makes a lazer noice

@mayaparts1460

4 жыл бұрын

@@JustMe-pi7fq Do a test burn on something. Draw a circle or square and then look at the result. If there is a small gap where the laser started/stopped, then the laser may be defective. If that's the issue, see about returning your machine for an exchange.

@JustMe-pi7fq

4 жыл бұрын

@@mayaparts1460 a square works great nothing wrong its just wierd dat it not works

@mayaparts1460

4 жыл бұрын

@@JustMe-pi7fq I'm not sure then. It might have something to do with the file, or maybe its a configuration issue?

What power do you have the laser set on when doing the glass engraving?

@mayaparts1460

3 жыл бұрын

We left it on the default power (which I think was 95). But you can always experiment with different settings until you find your desired result. Just remember that speed can also affect the power of the burn. The slower your burn speed, the more the surface will burn.