Establishing a straight line to install high tensile fence

Тәжірибелік нұсқаулар және стиль

Mike McElroy demonstrates how to establish a straight line for installing fence posts with high tensile wire for an electric fence and how to cut and reattach your wire in the middle of a run.

Пікірлер: 13

  • @adamsisler
    @adamsisler Жыл бұрын

    These videos are great! Thanks for putting them out there for us fencing rookies. Getting ready to fence 60 acres with timeless as my line posts. 👍🏻👍🏻

  • @Plastic-innovation

    @Plastic-innovation

    Жыл бұрын

    We're so glad you find them helpful. Any time you have questions please email us or give us a call. We're here to help you!

  • @SasquatchBioacoustic
    @SasquatchBioacoustic3 жыл бұрын

    Bunch of great tips in there. Thanks for the video.

  • @chickenhawkfarmstead8478
    @chickenhawkfarmstead8478 Жыл бұрын

    Awesome tips

  • @haydensievers5099
    @haydensievers50992 жыл бұрын

    Nice video! What are the specs on the wire you’re using?

  • @gedwardnelson
    @gedwardnelson3 жыл бұрын

    Excellent video. I’m using your 1.5” T-Posts and really like them. Two questions: How far apart did you set your posts in this video? How did you set your end posts?

  • @michaelmcelroy6038

    @michaelmcelroy6038

    3 жыл бұрын

    The post I used were 4' X 1.5'' set on 30 foot centers. For the end post I used the Timeless Fence H-post. These post were put in the ground 30" with one bag of quikrete then back filled with soil material. The H-post were out of plumb one bubble so when I tensioned the wire the H-post still sloped away from the pull. Another section I used the H-post and put a short kicker at a 45 degree angle like a floating brace.

  • @gedwardnelson

    @gedwardnelson

    3 жыл бұрын

    Michael McElroy thank you!

  • @joeyaheath

    @joeyaheath

    3 жыл бұрын

    Why cut in the middle? Use the gripple on one end to tighten the fence.

  • @yellow3222
    @yellow32223 жыл бұрын

    Cut the wire in the center and then re-thread it I’ve been doing it the hard way for years The ratchet in the center 🤦🏻‍♂️

  • @bryjbry
    @bryjbry Жыл бұрын

    You didn't need braces at the ends and you are using all H-posts, what kind of fence is this?

  • @Plastic-innovation

    @Plastic-innovation

    Жыл бұрын

    Thanks for asking about Timeless Fence Bryan. The fence is not all H-posts. There are only H-posts at the end where Mike is installing a spring gate. This was mainly for demonstration purposes on how to get a straight fence line.

Келесі