Thank you, bro you save my time and our life. Very professional.

Thanks. My jack got this code last month, would go forward, but when turning the throttle back, it would jump forward & shut down. Crown fixed it but today did it again. Luckily I was docked & got it back on the truck

@theforkliftguy

3 жыл бұрын

Did they replace the potentiometer? What did they do to it?

@melastname6548

3 жыл бұрын

@@theforkliftguy when i got back to yard, it worked perfectly. waiting for crown to come and take a look. all the crown equip weve bought in the last 5 yrs or so has had alot of issues.

@EduardoHernandez-io5hd

Жыл бұрын

@@theforkliftguy .

@EduardoHernandez-io5hd

Жыл бұрын

@@theforkliftguy Have you came across a wp 300 that says "over heat" If so what's the cause? Thank you

@theforkliftguy

Жыл бұрын

@@EduardoHernandez-io5hd yes. Most of the time it’s the 2 cables that come out of the drive motor. They come out of the drive motor and run through the middle where the handle pivots. Sometimes those cables snap or start shorting. Other times I’ve solved that problem by swapping out the speed sensor on the drive motor. If that doesn’t work then your drive motor is probably bad.

Broke down on me while unloading got stuck on the lift gate,found your video soon as I heard get your Allen wrenches take this apart I yelled for a forklift driver to throw it in the truck so I could take it back to the warehouse,no quick fix looking like a 12 hour day for me🤷‍♂️ 😂😂

@theforkliftguy

3 жыл бұрын

Yeah unfortunately, this error code is not a super quick fix :/ you have to replace the potentiometer on the handle.

Hello there, do you have the part number for the part you replaced? Mine is displaying the same code

Hello great video i got a questions on these jacks how can you do a speed adjust on these? I have one on the swhiched to fast mode and it still runs slow.

@theforkliftguy

Ай бұрын

You can’t really change the speed. It’s either turtle mode or rabbit mode. If it’s not switching from slow to fast, either the selector switch is bad or you need a new handle

@Rgmgarage18

Ай бұрын

@@theforkliftguy ok thank you for the reply 🙏🏻

I have code 854 the jack will not fo up or down. Could this be the pot that was replaced here?

@theforkliftguy

6 ай бұрын

No. Does it drive forward and back before you hit the up button? Also, does it make a “click click” sound from the contactor before the code appears?

I think the code is 853, what can I do, at the moment I can't move it

Thank you for the video, I have the same truck now showing code 857 SAS, I turn the unit on all is fine, once I engage the handle in the up position I hear one click and see this error code, and the truck can not move, thank you

@theforkliftguy

2 жыл бұрын

Possible causes of this code is a bad contractor, bad batteries or a damaged wire leading to the handle. Loss of communication. I would check the contractors and the batteries

@bodeng0301

2 жыл бұрын

@@theforkliftguy Thank you so much, let me check it out

Olá poderia mim tirar uma dúvida tenho uma transpaleteira elétrica crown com erro 332 o que pode ser?

Whatsup i have wp 3200 that is stuck slow traction. Even switching the hss it stays slow. what are possible parts i should test. Is the override switch on knckle of handle a good place to star.

good morning, I also have a wp and i have had great luck with it. But here lately, i have been having charging problems. I replaced the batteries but now, it is not charging the new batteries. Do you have any suggestions?

I have code 854 and 310 do you know what’s causing that or what it’s related to?

Bro! could you do A complete tear down video on wp3000? Would be cool if ya did.

@theforkliftguy

Жыл бұрын

That’s a great idea. I will try and do that

Could you please send me a link to that part where I can order it

Hello. I want to know how to speed up. PLEASE.

Olá poderia mim ajudar estou com um erro 332 o que poderia ser?

How do you read the codes?

@theforkliftguy

3 ай бұрын

The pallet jack itself will tell you the code. After that, it usually comes with a booklet inside the cover of the pallet jack and it has all the codes on there. If it’s not there, just Google the code and it should come up 👍🏼 hope this helps.

hello I have a problem in crown DT 3040 sometimes there is intermittence in the desenso of the main hydraulic help me please

@theforkliftguy

2 жыл бұрын

What is desenso?

@davidayalaleon5652

2 жыл бұрын

when the hydraulic goes down

we get this error constantly on our wp3000. they replaced the POT twice, thinking the 1st was defective. Any other thoughts on why the error still happens? can you calibrate the POT?

@theforkliftguy

2 жыл бұрын

You can't calibrate the POT on these models, only on the PE models. Another common problem is the traction card. It's the long computer board in the handle. The POT connects to it. I would start with that and if it continues, replace access 3 (big grey box controller on the right side of the unit. )

Do you know what this code mean 854

How do you calibrate the travel pot on the WP3000 series ?

@theforkliftguy

2 жыл бұрын

You can’t really calibrate the travel POT. If it’s throwing this code, replace it.

@jessnevares7861

2 жыл бұрын

@@theforkliftguy ok. So does the new travel pot come pre set? I heard you say to center it before install. Does it come already centered or you have to manually center it ?

@theforkliftguy

2 жыл бұрын

@@jessnevares7861 no centering needed on crown WP

Hi Bro, DO you know where I can buy this part? usually,how much? thanks so much. Kevin

@bodeng0301

2 жыл бұрын

google part# CR 813534, Traction Potentiometer POT F/C

I got a wp that does not stay on. Batteries are good power switch is good jst does not stay on. Any idea why? Thank you.

@theforkliftguy

Жыл бұрын

What do you mean by “does not stay on”. Like it powers on and then powers off? It doesn’t turn on at all? It does after 30 minutes?

@EduardoHernandez-io5hd

Жыл бұрын

@The Forklift Guy it's throwing a 325 code. It does not power up at all it'll turn on and off instantly

@EduardoHernandez-io5hd

Жыл бұрын

​@@theforkliftguy I have a wp 3000 it runs good but as soon as I raise it, it either turns off or it won't move back or forward anymore it'll only raise and lower and it does not show any codes. Any idea why? Thank you.

@theforkliftguy

Жыл бұрын

@@EduardoHernandez-io5hd thats typical signs of a short or super weak batteries. Have you done a load test on the batteries ?

@EduardoHernandez-io5hd

Жыл бұрын

@The Forklift Guy I actually replaced 3 batteries. It has one old one, maybe that could be the one? Would there be anything else I can look at?

Nice thanks for video

@theforkliftguy

3 жыл бұрын

Anytime! Thanks for watching!!

The thing is, when I hit the throttle to go forward, it goes backwards

@theforkliftguy

Жыл бұрын

You need to replace your potentiometer like in the video.

@florincheche163

Жыл бұрын

@@theforkliftguy OK thank you very much

@florincheche163

Жыл бұрын

@@theforkliftguy Any idea how much a potentiometer costs?

@florincheche163

Жыл бұрын

@@theforkliftguy A link where I can find for the order if you don't mind, thank you and with respect

@theforkliftguy

Жыл бұрын

@@florincheche163 I have one I can sell to you. But you would have to contact crown dealer or another local dealer. I can maybe give you the part number and see if you can find it online. I get my parts through a supplier.

Hi Forklif Guy ..good video did you know something about code 123 on crown sc4500 3 wheeler? I need some help ...6:54 PM pharr texas

@theforkliftguy

Жыл бұрын

Hello. It has to do with Brake switch 1 not matching between both computers (access 1 and 3). Check brake switches under the pedal and make sure you calibrate the brake pedal after.

@acebolt6916

Жыл бұрын

@@theforkliftguy i did It but also display the 322

@theforkliftguy

Жыл бұрын

@@acebolt6916 how’s the battery voltage ? Does it let you travel or no?

@acebolt6916

Жыл бұрын

@@theforkliftguy Is 35.60 the Forklif works well for 20 or 30 minutes it works well then it dials 123 and 322 I already checked voltage and temperature and it's fine I think the panel board or acces 3 are damaged what do you think

@acebolt6916

Жыл бұрын

@@theforkliftguy if it gets slow to move forward

I have a Crown WP 3035-45 that stutters and stalls when trying to reverse. Codes 853, 310 and 337. 853 keeps showing. Will POT replacement solve?

@theforkliftguy

3 ай бұрын

That’s the first thing I would replace, yes.

Hi i got a wp3000 and i got the code 857. Would it be possible that it might a similar defect as the code 857 ?

@theforkliftguy

3 жыл бұрын

No. Code 857 is unrelated to code 853. What symptoms does it have ? How are the batteries? Do you hear multiple click when you lower the handle?

@Jowey2010

3 жыл бұрын

@@theforkliftguy the battery are old and it does the clicking when we try to engage it.

@theforkliftguy

3 жыл бұрын

@@Jowey2010 replace the batteries. What you hear is the main contactor engaging and disengaging because it doesn’t read enough voltage.

@Jowey2010

3 жыл бұрын

@@theforkliftguy perfect thank you for your help. 🙂👍👍 keep up the good videos. It really helps a lot.

@Jowey2010

3 жыл бұрын

@@theforkliftguy Hi again, I've change the batteries and i still have the same issue. Would you have an other possible cause to check ?