This video is the best I've found and helped me breathe life into an old wf7620 that sat with ink hardened it its system for 6+ years. THANK YOU

Thank you ADCSFX for your thorough video. I was able to follow your instructions to clean, as opposed to replace the printhead in my WF-7620 and IT WORKED! Saved me $100 for the part and $300 if I had to replace.

Thanks a lot. I just used your video to repair our 5 year old WF-7620 (it is a real shame it is giving up so quickly). This is saving us some money, but above all it is one big multi functional printer that at least for now does not end up on the junk yard and gets a new lease of life. The FA13031 was quite hard to find though (only one eBay vendor in Spain still had stock of new heads).

I was not sure of how to replace this part and your video has made it possible. Thank you so much this has saved me a fortune because they just don't fix things anymore they just dump it in landfill.

@b.m.2392

6 ай бұрын

where did you buy the correct part FA13031

Just cleaned the print head of my WF-7610 with distilled water (that was a tip in a forum) following part of your tutorial. In fact very easy and the risk to break something is very low if you are cautious. A brand new printer. Thanks!

@rayibrahim4267

3 жыл бұрын

I realize it is quite off topic but do anybody know a good place to watch newly released tv shows online ?

@cameronmakai3344

3 жыл бұрын

@Ray Ibrahim Flixportal :)

@rayibrahim4267

3 жыл бұрын

@Cameron Makai thank you, I signed up and it seems to work :) I appreciate it!!

@cameronmakai3344

3 жыл бұрын

@Ray Ibrahim you are welcome :D

A really clear tutorial!! Thank you so much.

Thank you for this video. It really helped with cleaning my printer!

Great job. Thanks to you I did mine and it worked well.

Thanks for the tricky spot to unblock the plastic :D now its clean and working

Thank u so much for a detailed video and not doing it in speed. It can be followed very easily. My colors are not working. Black is ok. Ive done a few cleaning cycles, going to try a few more. If it doesnt help, I probably need a new head. thank you

Another thing you can try is to disconnect the hose from the cleaning pump and suck the ink out there with a syringe. This is much faster and the counter of the ink pads does not go up in score. Good video. Cheers

Fantastic video. Like watching a surgeon.

Vry helpful. I just replaced my 7620 printhead and it is going through cleaning cycle #3. New head, new cartridges, newbie repair tech . . . me! Thanks for the help.

@smokeyyy6926

10 ай бұрын

Did it work and where did you order the print head

@whacknquack

10 ай бұрын

Yes and I ordered the print head on Amazon.

thank you for your help to clean my WF-7710

@pookiemoon

3 жыл бұрын

I have 7710 to and it not printing all my colors

Thank you very much for your instructions.

Your good. Thank you for the video. Epson printers are always print head prone to plugs/clogs/failure and ultimately yep print head replacement:(

very clear video thanks

Great video. Thank you.

@PaoloMarcelli

4 жыл бұрын

Thank you for watching, I'm glad you found the video useful :)

Grazie Paolo ! 👌

Hi I have the same printer with lines printing where would you recommend buying a printer head or would it clean ok thanks great video. Also the guy who had it before me was using after market ink thanks

Hi. I followed the instructions... had a bit of a hard time getting all of the cables to fit back in, but did it... and then plugged the power cord in and I get nothing. No power. No lights. Nothing. Any ideas? Any and all help will be appreciated. Thanks!

any difference between replacement print heads on ebay? i see some OEM ($130) and just someothers for $60. any difference in quality or performance?

Bellissima la spiegazione, ma ho un problema con la mia stampante Epson WorkForce WF-7610 esce l'errore 0x97 , volevo sapere se cambiando la testina vecchia con una nuova,possa risolvere questo mio problema . Grazie Graziano.

thank you. I used this to open my print head and clean it but sadly it didn't clean up like I hoped. :( I was only printing yellow and black, but now after this I got blue back any suggestions?

After printing Sublimation with the old print head. Can I install regular ink instead with the new print head?

You did a great job on this video. This is my printer, and my problem is not so much that I need a new printhead, but when I do a nozzle check there is one line in black that always has gaps, no matter how many cleaning cycles I do. I think I can take out the printhead and soak it in cleaning fluid (ammonia). Perhaps this will clear out those nozzles. I don't know for sure. But you said the sponge pads under the printhead can be replaced. I would love to know how to do that. I have run so many cleaning cycles that I think this pad is soaked with old ink. Can you tell me how to do that? One final point --- please put your camera on a fixed focus. Every time you put your arm in the scene it focuses on your arm instead of the printer. Thanks again. You teach well!

@PaoloMarcelli

5 жыл бұрын

Hi Douglas You can try to soak the printhead with cleaning solution but that actually doesn't require that you remove it from the printer, but more on this later. About the "pads that can be replaced" I meant the waste ink pads, they are contained in the maintenance box, and you can change the maintenance box on your printer when it reaches the end of its service life with no problem, but it's not needed to replace it before. About the manual cleaning of the printhead, you can just unlock the carriage (as I've done in the video) then deposit some cleaning solution (not pure ammonia, you could damage the printhead, use at max. 30% ammonia in 70% distilled water) on the black pad on the purge unit. When the pad is totally filled with cleaning solution you can just move very slowly the head on top of it, keep in mind that when you'll move the head on the purge unit the pads will come up making contact with the bottom of the printhead (nozzle plate) so it's actually the same effect as removing the printhead and soak it externally. Also you don't need to remove the cartridges, so no air will get inside of the printhead. Finally, for the camera focus issue, I'm aware of this problem but I don't have a solution for this :/ I use my phone to record that is a Huawei P10 Plus, I don't use a camera with any settings to record professionally, but I always try my best not to block the view. Thank you anyway for all the suggestions, and if you need anything else feel free to contact me again :) Paolo M.

Is there any way to fix error 0x69 and 0x97? I have 2 WF 7620s with these errors, respectively.

I learned something about these I have a wf3640 to get working..this will help if I get it to power on. Power supply voltages check out ok..next, power button and ribbon cable connections

It will do the print nozzle cleaning but when i trie dot do the check it spits out a paper printing nothing on it and give some Error Code: 0x97

So many thanks for a great video. Any idea when I can but new replacement printhead? Do you recall the part no?

@PaoloMarcelli

4 жыл бұрын

Here in Italy we can buy them from Epson Authorized Centers, they sell parts too, but I don't know about other countries :/

Tell me how to replace the carriage drive belt?

Hey, thanks for the great video! Its so helpful. Just need a=some advice on; How much does the Epson Print Head cost in the USA?

@PaoloMarcelli

3 жыл бұрын

Hi! I'm from Italy so I have no idea XD

I followed the instruction and it appeared to be OK but then I got Error Code:0x69 - I think some others have too? Ho do I fix this please??

Great BUT my WF 7610 did not have the 3 screws inside to allow the print head to come out. I’m screwed !

Ciao, la procedura va bene anche per la WF-7720? Ti ringrazio.

Hi, I am mechanically inclined, actually mechanic- you did a fantastic job of the total process of print head replacement - do you have a store front - in the New York Area - we have 4 heads to install on different machines

After I changed the printhead it keeps giving me error 0x97 how do I fix this or did I mess up the printer somehow

Ciao Paolo, ho una WF7110 che ha un problema alquanto strano... Le testine sono perfettamente allineate, ma quando stampa in bidirezionale sdoppia l'immagine. Da cosa può dipendere?

Thx

I know this is old video but would WF-7720 have exactly same head ? I cant find any information regarding this, based on the look and sizing it looks identical

Dear Paolo, I got the old print head out and the replacement head installed OK. I replaced the cartridges and turned it on. I get an Printer error warning error code 0x9E. I have a Epson Workforce WF 7610 connected to a a MacBook.

Hello! Can you tell me where i can buy an epson wf7620 printer head but be sure? Thank you

Thank you so much, I got my print head replaced easily enough but when I plugged my printer back in and it came on the whole printer apparatus slammed into the left side of the printer and the screen said there was a problem to turn off printer. Any idea what could have happened?

@PaoloMarcelli

2 жыл бұрын

Sure, the CR Encoder strip is not in the correct place, or the sensor cable is not connected. Check the CR Encoder Strip.

Do you recommend changing the cables to or it should be good with juss a new printhead

@PaoloMarcelli

3 жыл бұрын

If they're not visibly damaged they're okay.

Great tutorial video, I'm after some advice about print heads . Unbranded vs Genuine Epson 7620 can any give out advice on the subject

@PaoloMarcelli

2 жыл бұрын

Hi! Epson printheads are only Genuine, even the printheads you find branded not as Epson OEM are indeed Epson OEM, they are the only ones that can produce them. The cheaper ones you can find (often unbranded) are old revisions and/or refurbished, but still Epson OEM.

Ciao, ottimo video! Dove posso acquistare la testina per la 7620?

Good helpful video. My 7710 printhead has just packed up after 18 months. £45 for a new at the moment. I needed one quick so I had to but another one instead. Oh well. Coz I just bought a ciss system for it and then it packed up..

@PaoloMarcelli

4 жыл бұрын

Yeah these printer models featured in this repair are prone to having problems in the printhead. They have been the first printers with PrecisionCore Technology, they haven't been tested throughfully and a lot of them appeared to be defective. Epson released a new printhead part number that works fine, but still you have to replace the head.

Hi, do you know anywhere reliable that sells a replacement printer head for the Epson WF-7720?

Great video. Replaced printhead, but it is not printing cyan and magenta. Have run three printhead cleanings. I have Epson WF-7620. Any ideas?

@PaoloMarcelli

5 жыл бұрын

Hi! Same thing written by another one of my viewers of this video via email, I think it's just air inside of the printhead channels, I suggested him to let the printer sit down for a copule of hours then retry with 2-3 cleaning cycles only on the colour section, he said it worked :) Paolo M.

@sbuben

5 жыл бұрын

@@PaoloMarcelli Actually that is what I did...two more cleaning cycles and printing perfect. Thanks so much.

Hi does anyone know how to replace the whole print head cables of a epson 7110?

Hello, my printer won't start up because an error. 033506 I can't find anything on the web about this error Epson 7210

Great video. Replaced the head and cleaned the color 7 times and still not showing up on the paper! Need help. also, where do you fool the printer into thinking the lid is closed?

@PaoloMarcelli

Жыл бұрын

There's a switch but I can't remember where it is without having the printer in front of me at the moment haha! Try to install new cartridges and run an INK CHARGE using WIC Reset. This function of WIC Reset is free so no need to buy a key.

Will replacing the print head allow me to use my wf7610 as a sublimation printer if it originally had regular ink in it?

@PaoloMarcelli

4 жыл бұрын

Never tried but I think you could, but before replacing it I'd try to flush it with glass cleaner such as windex, then install refillable cartridges with sublimation inks and run an ink initialization with the Adjustment Program.

Hi Paolo, I know my question is not related to this video, anyway, I still want to ask you bec. I can see that you really know these kind of stuffs..I have an epson WF 7710, once I turned it on, it will give me an error message code of 031004. May I know how to resolve this problem? I have looked almost all of the youtube tutorials regarding this error code but to no avail. Then I stumble to your video and I see how clear and helpful your videos.. Hope you can help me. Thanks.

Ciao Paolo, complimenti per il video. Mi hai suggerito come sostituire la testina e l'ho fatto comprando su aliexpress la testina. Ma dopo aver sostituito la testina la stampante sembra impazzita. di qualsiasi immagine stampa tutti i colori a linee sovrapposte tanto da non capire che immagine sia. Ho riferito quanto succede al fornitore e mi ha inviato una seconda testina che però stampa a malapena solo il nero e ciano. Cosa devo fare? chiedere il rimborso o una terza testina? Con dispiacere ho scoperto che vendono solo testine ricondizionate. Mi dai l'indirizzo del tuo fornitore testine epson? Grazie per il tuo aiuto

I replaced the print head as per the instructions. When done the printer will not turn on at all. I don’t know if it matters but I did have some struggles getting the ribbon cables back in place for reassembly. Any and all help will be greatly appreciated. Jason

@PaoloMarcelli

4 жыл бұрын

Most likely you connected one of the flat cables not correctly, if it doesn't power on at all, it could have shorted and killed the main logic board :/

how do you replace the sponges underneath that clean the printhead? what do i need to find?

@PaoloMarcelli

2 жыл бұрын

I didn't understand what sponge do you want to replace :/

ماذا تعني هذه الاشاره Error Code:0x69

Great Video ADCSFX!! I removed my printhead and see that the printhead ribbon has had a short (and 2 connector pins have blow) where the ribbon connects to the printhead on the black ink side of the printhead. I can't figure how to get the ribbon out of the printhead housing and the springloaded white ribbon holder on the right side. Also it looks like it will be very hard to put the 3 connectors in on the left side of the printer (in the corner). I can send pictures if that would help. Thanks so much for your thoughts. Vince

@PaoloMarcelli

2 жыл бұрын

Hi Vince! Unfortunately when that happens the printhead is shorted, and you need to replace the printhead, the flat cables and also the main PCB :/

Ciao Paolo! Ho provato a fare la pulizia della testina di una wf-7610. La situazione iniziale era: 2 colori bloccati e nero e altro colore ok. Ho smontato la testina e pulita con ultrasuoni con acqua e alcool iso, dopo una notte di asciugatura il risultato è 1 colore bloccato e nero ko!! Gli ugelli del nero sembrano puliti perchè l'inchiostro sembra uscire ma in fase di stampa non va! Considera che ho disassemblato la testina e messo negli ultrasuoni solo la parte inferiore.

Hi. What an interesting and useful discussion forum! I wonder can anyone tell me if the main board for a WF7610 is identical to the one fitted to the WF7620? My WF7620 is coming with the fault code of 0x9A which seems to mean that the main board has a fault and needs to be changed. I've been offered a WF7610 board which hopefully will do the job! Also does anyone have a reciepe for an effective printhead unblocking fluid because the ones I have seen recommended such as Piezoflush is ridiculously expensive. I can get basic items such as isoprop alcohol, ammonia solution etc but am unsure what to use. I did try ammonia some time ago and I think it damaged the printhead of a WF2750 - maybe too concentrated. I've also seen here in the UK a product called 'printhead magic' also pretty expensive whose componant parts seem jealously guarded!!

Where did you buy the replacement print head? How do we know the right specifics?

@PaoloMarcelli

3 жыл бұрын

Hi! I answered both questions in the comment pinned at the top XD just read it :)

Where did you buy the Printhead at?

Volevo chiederti un consiglio. Sono sempre alle prese con la pulizia testine di varie stamanti come la r200 che ha solo problema al nero ( due trattini) è una sx125 con problema al nero. Con il Quasar ho risolto Delle situazioni ma in questi due casi non sto risolvendo sia nella r200 che non migliora e la sx125 che è migliorata da totale assenza di nero al ritorno del nero però molto imperfetto. Allora ho deciso di provare con un liquido Ocp ESS specifico per stampanti Epson per vedere se riesco a risolvere. Lascerò per 3 giorni il liquido iniettato da un tubicino è una siringa sopra che fa da contenitore come ho fatto per il quasar. Secondo te potrebbe essere la strada giusta? Oppure secondo te meglio Quasar? Mi girerebbero buttare una r200 solo per due trattini. Domanda meglio Quasar oppure liquido OCP PER testine Epson? Ciao fammi sapere

@PaoloMarcelli

6 жыл бұрын

Ciao! Scusa per il ritardo, ma sono stato un bel po' in ferie :) Sinceramente non ho esperienza con il liquido OCP ESS, ma non ho trovato differenze tra i liquidi di pulizia testine che ho comprato gli anni passati e il quasar. Nei casi più estremi (ma lì davvero rischi di buttare via la testina) ci metto il pool, ma solo come last resort, dopo aver provato e fallito col quasar, con la pulizia in ultrasonic, e altri metodi. Fammi sapere in caso :)

where do you get replacement print heads?

@PaoloMarcelli

5 жыл бұрын

Hi! Local company who works with Epson, but you can find on AliExpress and other sites, just be sure it's the latest revision.

I have a wf 7710, do they use the same printhead with wf7610? Thank you

@PetrosAvlitisParos

2 жыл бұрын

Yes ....mostly. The 7710 is the same as 7610. Only differences: facade, power unit and motherboard. Paolo Marcelli wrote some time ago: "HEY :) As everyone is asking the same thing I'll pin a comment up here: Is the WF-7610/WF-7620 printhead the same of the WF-7710/WF-7720? The answer is... It depends on the printhead revision and part number. You see, Epson updates their components when any defects are discovered. FA13001 and FA13002 part numbers only work on the WF-7610/WF-7620 , FA13031 part number works on both the WF-7610/WF-7620 and the WF-7710/WF-7720"

Hi Paolo - great video thanks. I have error code 0x9A which happened after I removed and tried to clean the printhead. I'm happy to purchase and install a new one but some folks say this error code relates to a small SMD fuse on the main PC Board. Is this likely as i don't want to waste money on a new head..?

@PaoloMarcelli

3 жыл бұрын

Hi! You can always test the fuse with a multimeter in continuity/resistance mode before purchasing the new head. Honestly I've never seen that error created by that fuse but oh well, you never know XD

@nicktasker4808

3 жыл бұрын

@@PaoloMarcelli Thanks Paolo. Is that fuse easily accessible? I don't want to have to take the machine totally apart to access the PCB?

@Sam-wz6ns

2 жыл бұрын

@@nicktasker4808 Hi Nick... is not easy. WF is not technician friendly at all. The fuse is F2, and yes, it usually blows when ink spills. You have to dissasemble nearly all the machine, dissasemble the mainboard and in the CG36 mainboard is located next to the F3 fuse (near the F4 too). The other fuse is in the other side of the board. After soldering the new fuse make sure to clean the printheads and the carriage contacts with isopropyl alcohol. About replacing printhead... I never needed to do like in other epsons. The fuse (F2) is a fast 0.5amps so it just only blows the fuse, but never seen a burned transistor or blowed printhead on these machine series (7710, 7715 and 7720)

Ciao Paolo, video molto professionale e utile. Posso chiederti dove acquistare delle testine nuove e quanto dovrebbero costare?

@PaoloMarcelli

2 жыл бұрын

Ciao! Puoi chiedere a un centro di assistenza autorizzato Epson (trovi la lista sul sito Epson). Oppure, ricordo che occasionalmente utilizzavo anche cheapoffice.it o ide-parts, ma si parla di ANNI fa' XD. Per il costo sinceramente non ti so dire perché l'ultima volta che ne ho comprata una era quando ho fatto questo video, mi pare sugli 80-100€ però...

where do you get replacement head

@PaoloMarcelli

5 жыл бұрын

Sorry for the delay I bought it from an epson authorized reseller, but they are very expensive that way and I didn't pay for it (the customer and printer owner paid). You can find even some heads on AliExpress but I don't guarantee they are new revision... Paolo M.

Hi, thanks for this video, its very informative but I have a challenge, I've just changed the printhead of my WF7610 and the black nozzle came out 100% almost immediately but the colors are yet to come out even after doing cleaning of the colors except black 4 or 5times. What else can I do please?

@PaoloMarcelli

2 жыл бұрын

Hi! Try installing new cartridges (if they are less than 80%) then install WIC Reset and perform an ink charge. It's free.

@ola6622

2 жыл бұрын

@@PaoloMarcelli pls what's WIC reset?

@PaoloMarcelli

2 жыл бұрын

@@ola6622 Just google for it... Or go to this link www.wic.support/download/

My 7620 is always needing cleaning cycles. The printer sometimes goes weeks without use.

I changed the printhead on my wf7210. Only problem is there's nothing printing. No colors or black. It went through the preparing ink and everything. Any suggestions?

@PaoloMarcelli

3 ай бұрын

Try doing an Ink Charge with WIC Reset (it's free, if you see something about buying keys that's only for the waste ink reset function that you don't need)

I just replaced the print head on my 7620. It was remanufactured from ebay. I have watched a couple different videos about changing the print head (you had the best by the way). Anyway, I am getting no ink. I have run the cleaning mode multiple time and the nozzle check. But, my paper comes out blank. No ink at all on the paper. What could be the issue? Thanks.

@chuckmoon1329

Жыл бұрын

I have the same issue, print head replacement went fine, ran cleaning and nozzle at least 10 times, no ink printing on paper. Any suggestions?

@mikef9327

Жыл бұрын

@@chuckmoon1329 hello. I have the same Issue. Do you resolve the problem ?

@mikeekeocha2359

11 ай бұрын

Did you solve this? Are the heads defective on ebay

Know a good place to buy print heads? Trying to avoid ebay and those 3rd party walmart listings. All of the parts sold there are guaranteed to fail or ship with blocked channels. Print tests always have missing lines, even after head cleanings. They are shipping junk as so-called refurbished. I don't mind refurbished, as long as all the channels work consistently, but most of these Chinese sellers are scrounging up scraps and reselling them. Model is wf-7610. My last ditch effort was to buy a wf-3520 for cheap and swap the head, but that option is out since they're now selling for over $100 (or googles silly results showing $800 on shopping). Odd thing is, ebay used to sell sealed print heads that came from epson. Since the 7610 is an old model, I would at least have expected them to sell heads for the newest models like the wf-7820, but nothing.. if i bought that new printer, there would be no head replacement options for it same as the 7610 on ebay.

@PaoloMarcelli

Жыл бұрын

In Italy I can buy printheads directly from Epson by their authorized dealers and service centers, try contacting an epson authorized dealer and ask them if they can sell you the head, it's very expensive though.

E' vero che dopo aver inserito una nuova testina, poi va fatta una procedura per caricarla e si esaurisce un intero set di cartucce ?

@PaoloMarcelli

3 жыл бұрын

si

Why didn't you remove the cartridge cover ? It is quite easy, and makes access much better

If my yellow and Magenta ink is leaking on my prints when I print, does that mean I need to replace my printhead? Its not simple ink spots or lines it actual blobs of ink on my prints

@PhotographyChick17

5 жыл бұрын

or do I just need nozzle part?

@PaoloMarcelli

5 жыл бұрын

@@PhotographyChick17 Hi! There are some things to check that I need to know: 1. What printer are you using? I mean brand and model number. 2. Are the paper settings correct? 3. What type of cartridges are you using? (ex. compatibles, refillables, OEMs)

@PhotographyChick17

5 жыл бұрын

@@PaoloMarcelli Epson Workforce 7610, Yes the paper settings is correct, I'm using refillables

Quick question where do you find the flat cable? My 7620 wouldn't power up after I turned it off after 3 print head cleans. I watched a video on this problem, and it was said that the flat cables could be damaged, and if so, the prin tree er wouldn't turn on. I Took it apart, and low and be hold that's the problem. I just need to replace the flat cable. Where can I find that? Thank you.

@PaoloMarcelli

3 жыл бұрын

Hi! I don't know where could you find it, but for sure the problem is not that XD it's a main logic board failure. The printer should power on even without those flat cables.

@mainmandev

3 жыл бұрын

@@PaoloMarcelli Thank you. Can one of those boards be purchased? Or just get s new printer?

@PaoloMarcelli

3 жыл бұрын

@@mainmandev It depends by the country I think, here in Italy Epson Authorized Centers can sell you mainboards and other components, but sure they are very expensive.

@mainmandev

3 жыл бұрын

Expensive like how much?. The printer was $300. Is it more than that?

Buenas tu conoces como arreglar el error 033507 en esta impresora?

@PaoloMarcelli

3 жыл бұрын

Hi! If you write in english maybe I'll be able to help you :)

Dove trovare un ricambio affidabile?

ciao ADCSFX complimenti di nuovo per i tuoi contributi. Ti volevo chiedere dei consiglio? hai un forum aperto per comunicare e chiedere consigli e condividere esperienze? ho bisongo di si stemare delle r200 e stampanti di quella generazione ma sto incontrando delle difficoltà insieme a dei piccoli successi. Io non so quale sia il canale migliore per comunicare con te...se hai un forum o altro fammi sapere ciao grazie Stefano

@PaoloMarcelli

6 жыл бұрын

Non ho un forum, ma questo tuo commento mi ci ha fatto pensare... Non so se col pubblico che ho con questo canale youtube (abbastanza ristretto) possano esserci persone interessate all'apertura di un forum, ma alla fine non mi costa nulla farlo. Vedrò se farlo o meno. Per adesso i metodi di contatto possibili sono i commenti di KZread, e gli altri metodi di contatto elencati in descrizione Paolo M.

Are the printheads on WF-7620 and WF-7720 interchangeable? Thanks :)

@PaoloMarcelli

2 жыл бұрын

Hi! Yes they are the same :) the latest code revision for that printhead is FA13031, other older and less reliable codes are [FA13001] [FA13002] [FA13003]

Hi all, I'm looking for a video to replace the Epson WF-7510. HELP!

I followed your directions to a tee. Now I turn the printer on and get a error message OX9a error. Any idea on what the problem is and how to fix it?

@havenpilates6956

4 жыл бұрын

Any luck fixing this? Im getting the same after a clean.

@jamespaishon2545

3 жыл бұрын

Any luck with this, I am getting the same error.

@brettpierce8659

3 жыл бұрын

I got error code 0x9a after trying to clean inside the printer. It turned out that I got some ink on the encoder ribbon (mostly clear with very fine vertical lines) which runs behind the print head. I carefully cleaned this ribbon and the error code went away.

I read you comments the part # looks like FA13031 what should be the reasonable cost? Do sell - can I buy from you ?? - And is there a video you made on cleaning the print head parking socket ?? and toe correct solution to use

@PaoloMarcelli

6 ай бұрын

Hey! Sorry but I'm located in Italy 😊 I've made a video about basical maintenance for cleaning the cleaning pad(s) but it's in Italian, I can buy those printheads directly from Epson but are very expensive.

Where can I buy the printhead for the WF7610 - I am in USA - thanks

@PaoloMarcelli

3 жыл бұрын

Hi! Read the pinned comment I wrote

@DavidBrown-pb3gn

3 жыл бұрын

@@PaoloMarcelli I don't see your comment??

Hi please How much does the Epson Print Head cost in the italy and where i can find it?

@PaoloMarcelli

Жыл бұрын

In Italy where I live we can buy it from Epson Authorized Service Centers, in other countries I don't know if there are any authorized redistributors. Code is FA13031, costs (for what I remember) around 130EUR

@SALAMAYoussef

Жыл бұрын

@@PaoloMarcelli Thank you so much

Where can you get this print head?

@PaoloMarcelli

Жыл бұрын

In Italy where I live we can buy it from Epson Authorized Service Centers, in other countries I don't know if there are any authorized redistributors

hi, is it safe to replace a wf series print head with one made in china? because the price is cheaper

@PaoloMarcelli

3 жыл бұрын

Those are genuine epson printheads, but used. It's impossible to manufacture printheads. That said you can try, but be sure to be able to ask for a refund if they don't work.

buonasera paolo, dove posso trovare questa testina di stampa?

@PaoloMarcelli

Жыл бұрын

Ciao! Chiedi se te la vendono in un qualsiasi centro assistenza epson della tua zona, oppure contatta cheapoffice.it e senti loro se ce l'hanno

@stefanocafarotti5091

Жыл бұрын

@@PaoloMarcelli ok. Per caso puoi dirmi il prezzo?

also the procedure is the pretty mush same for wf 3640

@PaoloMarcelli

5 жыл бұрын

Exactly!

Unfortunately, that was not the part that was faulty, it looks like it's the part on which this is put on (visible from 6:26).

u seem reall ygood with these printers. I was gonna ask if you or anyone could PLEASE make a video on showing how to remove the star shaped exit rollers that cause Pizza Wheel marks? Ive been told it can be done and doesnt hurt anything but i am scared to do it without a guide since im not overly familiar with these printers and have only had this Epson WF-7720 for 2 months. So if someone could PLEASE make a video for this or a video some other way showing how to get past the pizza wheel marks on glossy paper.

@PaoloMarcelli

4 жыл бұрын

Hi! Yes they could be removed but I would not do that. It's not likely to cause problems when you print on high weight paper like glossy photo paper, but common paper at 80g/m2 really needs the guide of those star shaped rollers at the end, that could eventually cause a paper jam because the paper sheet could get in the way of the printhead/carriage, or you could have ink smudges on the prints! Anyway, I'd make a video if I had a printer to make the video on :/ unfortunately I don't have one at the moment.

@teddyblankenship782

4 жыл бұрын

@@PaoloMarcelli is there a step by step or somewhere i could find instructions on how to remove them? I cant stop the damn pizza wheels and its driving me crazy. I just wanna get rid of them.

@teddyblankenship782

4 жыл бұрын

if anyone could make a video of how to remove the little white plastic wheels or just show me how to get to them so i can remove them i would gladly pay for the persons time.

Hi

Close the scanner unit 7620

@PaoloMarcelli

6 жыл бұрын

Hi This error is not related to anything you should've done to replace the printhead! Check all the tabs are attached correctly and nothing pushes against the scanner unit. Try closing manyally the scanner sensor to see if actually there's a problem with the sensor or it's something else Paolo M.

Dimenticavo la stampante è una BX535WD

You never put back the 3 screws holding the printhead.or you didnt show it.

7720 print head the same?

@PaoloMarcelli

3 жыл бұрын

Hi! It depends by the printhead revision. FA13001 and FA13002 only work on the WF-7620 FA13031 works on both the WF-7620 and the WF-7720

@michellesister9016

2 жыл бұрын

hi.. what printhead model works on wf-3640?

Error

PSA: If you own a wf-7610 or similar, do not buy a replacement print head. All print heads in circulation are refurbished heads that were originally refurbished. This means 80% or less of the nozzles/channels are working. You will never get a 100% clean head test. Epson does not manufacture brand new print heads for these models anymore, so you are going to end up with malfunctioning refurbs on ebay or amazon etc.. There may be less than 5 brand new print heads listed on the internet right now, that's about it. Expect to pay $300 for one of these. Buy a new printer. 7820 is the latest equivalent for 7610 (7840 for 7620, yes, weird numbering..) The print heads on those models are brand new and replacements in circulation are also new stock.

@nuznannie

Жыл бұрын

Sure wish I had read this sooner since I just purchased a $35. printhead for my WF7610 and it did not fix the non-printing. Mine does not print at all. I put in ONE new cartridge since I do not want to spend the money to buy new carts if it will not print. I thought I may just redo the whole procedure; maybe I did something wrong but I followed the video to the letter. I get power and everything else works; scanner and USB ports.

@mikeekeocha2359

11 ай бұрын

Are the printheads on eBay defective? I bought four but they didn't print