Epoxy Flooring Disasters: 7 More Troubling stories
Watch the first 10 disasters here: • Epoxy Flooring Disaste...
To learn about Mixing Mistakes: • Epoxy Mixing Mistakes
Sticky Epoxy Problems: • Sticky Epoxy Floor ? -...
The purpose of a spiked roller: • Spiked Rollers in Epox...
To join our Online Course: www.smallbizcontracting.com/e...
If you need epoxy tools:
amzn.to/3wmXZTz
amzn.to/3wbUAH6
The 7 Disasters discussed in this video include:
1) The Spiked Roller that was not rolling
2) The No Exit Plan
3) The Last Square Metre Part 1
4) The Last Square Metre Part 2
5) The Low Quality Paint Roller
6) Improper Leveling
7) The Warm Roof Disaster
Пікірлер: 32
Very generous of you to share this valuable information. I just started working in a floor coatings company with no prior experience and this will help me a lot!
@learncoatings-epoxyfloorin9448
3 жыл бұрын
Glad it was helpful!
@BeingUnkown
2 жыл бұрын
Hello Aditya how can i contact you ?
@adityacapte
Жыл бұрын
@@BeingUnkown send me a private message, I'll link you my email
Applying epoxy is definitely a learning curve. Helped a friend yesterday, supposeto be a 45 minute epoxy work time but turned into 25 minutes setup. We had a small nightmare to over come.😒
@learncoatings-epoxyfloorin9448
3 жыл бұрын
Yup, epoxy also has its surprises!
God bless you and your family . Thank you v much
@learncoatings-epoxyfloorin9448
2 жыл бұрын
thank you!
Thanks for this tip
All good and usefull
This channel is just great. The guy is very sympathetic and explains very well everything concerning Epoxy! Just great... Thanks
@learncoatings-epoxyfloorin9448
3 жыл бұрын
Thank you very much!
Thanks for such a nice video. Helpful.
@learncoatings-epoxyfloorin9448
3 жыл бұрын
Glad it was helpful!
thank u sooo much man .. it`s great informations
@learncoatings-epoxyfloorin9448
3 жыл бұрын
You are welcome my friend!
Thank you very much, so nice.
@learncoatings-epoxyfloorin9448
3 жыл бұрын
Our pleasure!
Here, cured epoxy lifted along a patio door (makes like a long and large blister). We suspect there was a big temperature gradient between the door sill (very cold outside) and the concrete slab (radiant floor). The epoxy layer probably popped up due to the thermal stresses. The epoxy on the heated slabs stops against the door sill, so everything is glued together. Can we glue it back by injecting some sort of adhesive and press on it? before that we would rework the door sill to allow the floor to move freely. Thanks!
@learncoatings-epoxyfloorin9448
3 жыл бұрын
I have never managed to glue a piece of epoxy back in place. Better to break that part off and recoat the strip
thank you a lot
@learncoatings-epoxyfloorin9448
3 жыл бұрын
You mean turn on AC in van? That might put a drain on your battery and gasoline, not to mention the pollution. Also vans tend to have AC only in the cabin up front, the back area of the VAN is usually never air conditioned
@Mazen-dh1yl
3 жыл бұрын
@@learncoatings-epoxyfloorin9448 thank you for your time sir ! i meant can someone turn the ac on in the working place because in gulf it get's really hot and that effects the pot time. so the question is can i work in a room while the ac is on (25c-27c for ex)
Do You apply epoxy with rubber notched squeegee or metal notched squeege?
@learncoatings-epoxyfloorin9448
2 жыл бұрын
I prefer metal notched squeegees cause they tend to last a little longer. I find rubber ones wear quicker, and need replacing more frequently. With flat squeegees I prefer rubber
Interesting stuff. I am so interested in these floors. How can I contact you directly?
@learncoatings-epoxyfloorin9448
3 жыл бұрын
I can be contacted at Akis at learncoatings dot com
🇧🇷🇧🇷🇧🇷👏🏻👏🏻, Awesome job guys !
@learncoatings-epoxyfloorin9448
3 жыл бұрын
Thank you Claudio for your nice words, lots of greetings from Greece!
Hey can i get any contact information like Instagram or facebook I want some tips for epoxy flooring as i’m into home decor in Mauritius and i do these kind of flooring But one of my 3D flooring failed so i need some help
@learncoatings-epoxyfloorin9448
3 жыл бұрын
3D is not my strong area unfortunately. But if you want overall knowledge on epoxy, I can recommend you our online course www.smallbizcontracting.com/epoxy-flooring-course