Thank you very much ..love when you bend the tube look easy but when i try not easy

@Keep-IT-Cool-Custom-PC

Күн бұрын

You can do it! Practice making 90 degree bends. Take it slow and don't force it.

Great work! Also stunning pc!

You have skills my dude! I always have to one of those guides when bending

Nicely done!

Very good craftsmanship and nice build. Weldone my friend👍👏👏

Feel joy to see it stay below 40c.

Very nice. There should be a fire-sale on ASUS gear very shortly! Rolling in the aisle laughing my arse off aside, you very much hit the ground running, matey. Kudos, keep 'em coming! The 'Pop Tubes' use was the cherry. But where is Part 1 and the painting tutorial?

Corsair’s build😊

Very nice.

Great video - you made it look easy - makes me want to get this case and build a custom loop. Do you have any idea what sort of fan rpm you get when the PC is under full load/gaming? Just wondered if it sounds as good as it looks!!??

@Keep-IT-Cool-Custom-PC

2 ай бұрын

I'm using the QX120 fan and I generally set my fans around 60%, that's around 1200-1500 rpm. With iCue, I do have a gaming profile which it'll switch to 80%. Keep in mind that these components are high end and they do produce a lot of heat.

@AndrewKennedy-pu9or

2 ай бұрын

@@Keep-IT-Cool-Custom-PC Thanks for the informative response. The fan RPMs are higher than I would have thought for triple rads, but like you say you're running high end components. The QX120 fans look amazing, but I guess I would get lower RPMs if I went for different fans (I've just seen this kzread.info/dash/bejne/aoWCx5OkibSaac4.html )

Woaa so amazing…🇺🇸🇺🇸🍀

distro looks nicer. the end

Is that the Corsair Vertical GPU Mount? I was told couldn’t fit it with a Corsair XR5 360mm rad and QX120 fans on the bottom of the case.

@Keep-IT-Cool-Custom-PC

Ай бұрын

No mount since it couldn't fit a 360 radiator with the fittings on the left side. It can be done when you orientate the fittings on the right hand side. For this tube run, the GPU block is held by tubes going up into the CPU block and to bottom radiator. The 90 degree PCIE riser also provides support.

@captain_insanogaming3085

Ай бұрын

Can I get a link to the GPU Riser you used?

@Keep-IT-Cool-Custom-PC

Ай бұрын

@@captain_insanogaming3085 I used this riser amzn.to/4dfOhY8

Could you give me gpu water block information? I could find only black color.

@Keep-IT-Cool-Custom-PC

4 күн бұрын

I painted it white. Unscrew 4 corner screws in the back. Lightly sand it, and give it multiple layers of paint

imagine still using a screwdriver for the m.2 ssd slots lol

Do you sell these? Take my money!

@Keep-IT-Cool-Custom-PC

19 күн бұрын

Not at this moment. Someday I will!