Thank you so much for doing this series. I just paid a ton of money for one of these and it wouldn't do more than 22mph. I was not happy. Now it will do 30mph without having touched the rpm regulator. I appreciate it. Waiting on the next video please.

@SearlesStation

4 ай бұрын

Totally. 22 feels slow. 30 mph is nice for this machine. 35 gets a bit unstable mostly from the hydraulic steering setup. I've had mine hit 38 mph now!

My X1140, when warm, does 26 on flat pavement. It would do 25 when new and within a year I noticed it began to struggle to get 23. I adjusted the slack out of the throttle cable and it now hits 26. I was careful to not allow the adjustment to increase idle speed, just no slack in the cable. I look forward to what other things you adjusted to get maximum performance. Like you, I didn't buy the X1140 because it was fast. I do, however, sometimes run to the hardware store or to a friends house 3-4 miles away and having a little more speed would be nice. I have often thought if it would only do 30 I would be satisfied. Only 4 mph but it just feels better at that speed when traveling on road. BTW on road use is legal on county roads where I live.

@SearlesStation

6 ай бұрын

That's perfect! Taking slack out of the cables is a big help. That's helps with overall response too. So when you touch the pedal, it's starts responding. I've seen some where you're pushing 1/4 way down before anything happens. That's no good!

AHH YES I FOUNF THE VIDEOS!!THANK YOU!

@SearlesStation

6 ай бұрын

Welcome! Let's have some fun 😁

How do I turn up the hydrostatic trans pressure on a RTV900?

22 mph flat ground on a incline not a big one just little one just want climb in h have to stop and go to low at 4 mph to get up any incline any advice

Really appreciate the videos, currently got a 2010 Rtv500. Is there a way to get more power? Seen some people say adjust servo screw, where is it?

@SearlesStation

6 ай бұрын

Yes! There are a couple things you may want to do. I would start with the in cab foot pedal adjustments that way you know when you put your foot down its actually going back to the linkage

Just found this by accident. Need more speed and power . Mine is on tracks so can’t go by my mph . Follow all the forums and web pages not much you can do without out turning up the hydraulic pressure? Thinking of adding a turbo to help with the power. Wish I could bolt up a bigger motor to tve transmission.

@SearlesStation

3 ай бұрын

Add the turbo, it should help some. (Although mixed reviews on that.) I'd love to get your machine in the shop to see if I can tune it for you.

I am at 31MPH with all four sides on jackstands. I am at 30 on blacktop. But I do most of my work at 5-10 MPH and mowing at 3mph.

@SearlesStation

4 ай бұрын

That's pretty good! I think this machine is perfect at 30 mph. Handles it nicely 👌 I mainly snowblow with it and just cruise around. What do you use to mow? Like a pull finish mower?

Can you do this with a X900 diesel 4x4 Kubota?

@SearlesStation

3 ай бұрын

Yes

Need help finding the video my x1140 when new did 24 am lucky if I can get 18 mph

@SearlesStation

Ай бұрын

Thanks for watching!

My 1100 did 20-25. After oil hydraulic oil change it had now power forward or reverse now?

@SearlesStation

5 ай бұрын

There are 2 places hydraulic fluid goes, in the transmission gear case which is under the box and the reservoir under the seat. Is the fluid reservoir under the seat full oil on the dip stick?

@WyteOutAK

5 ай бұрын

@@SearlesStation under the seat tank is low the oil dipstick is dry.

@SearlesStation

5 ай бұрын

Fill it up!

@WyteOutAK

5 ай бұрын

@@SearlesStation I will do that when I get the chance too. I had to use chevron hydraulic oil.Because I’m to far from a dealer for Kubota oil. And that’s the only oil I had availability.

@SearlesStation

5 ай бұрын

Let me know how it goes

The Kubota rtv is a good reliable workhorse but if you want speed buy a different make

@SearlesStation

Ай бұрын

For sure, for sure. But it can go 30 no problem. When I hear people say it only goes 16 or 20, that just not right.

I don’t care about more torque and speed I love to cruse inside the cab jamming carrying full loads in the back

@SearlesStation

6 ай бұрын

I can drive mine around town with a permit. I love it

My new RTV-X2 tops out at 19 on fairly level road. I was expecting 25.

@SearlesStation

3 ай бұрын

It will get a bit better as it breaks in. After a couple hundred miles, bring it in or adjust some stuff.

Wouldn't it be better to drive it and see what it does? Spinning wheels on a lift doesn't mean much of anything. It has to move it's weight. It has to overcome rolling resistance and wind resistance and tire size and pressure and.... Just because you make it go faster on a stand doesn't mean it will do that in real life. HP and torque especially aren't spinning wheels on a lift.

@SearlesStation

6 ай бұрын

Yes, I agree with a load... up hill, down hill etc... it will take power from the engine. What I'm saying is that as fast as your machine will go with no load, raised up, is as much as you'll ever see while driving. I go up hill at 20, but down hill at 35. If it doesn't go 35 on the lift, it won't down a hill either. So that's the baseline I'm suggesting.

Bigger tires make it go faster.

@SearlesStation

5 ай бұрын

Yes, it can! There is low end loss. By reducing total wheel weight, youd gain some too.

My speed is 11-13 downhill with a plow. Going uphill with the same plow it’s 4 mph. Lmao. Going reverse on the same hill it hits 6-7 mph. It’s a funny joke.

@SearlesStation

6 ай бұрын

There is something not adjusted right in that machine!

@UnitedStates.

6 ай бұрын

@@SearlesStation Probably something very wrong. Thank you for these videos! Maybe it’ll fix the issue. Is there a possibility you could do other videos for basic maintenance (changing all fluids) and perhaps others like changing the alternator, arrestor cleaning, etc? This is one of the handful channels who actually have very nice quality videos which are a great resource for everyone without spending a fortune in the dealership! Thank you for the videos!

@SearlesStation

6 ай бұрын

Thank you! Yes, absolutely. I will make every video I can, as good as I can. Might not be perfect but keep asking and I'll keep going

Wanted to go faster put a turbo on it and bigger tires quit crying about it.... spend that money.....