WE CONVERT A 2017 KAWASAKI KX 450 FRAME TO EXCEPT A KX 500 2 STROKE ENGINE USING A AMAZING KIT FROM TSR RACING.
Жүктеу.....
Пікірлер: 34
@Profabdesigns2 ай бұрын
A couple of tip to help y’all out. Turn your pre and post flow argone to be a little longer so you don’t t undercut your welds. Also turn the HTz to 180htz. It will buzz like crazy but you’ll improve the penetration and flow 😊 of the welds to be more effective.
@lindahuntington59311 ай бұрын
Good to see you this a.m. have a great day. Remember to always measure twice and cut once! Works every time. ( just a little quilting advice from Mom) ❤️
@DIRTVENTURE
9 ай бұрын
measure twice cut short the take a bit more off lol better to little then to much... ????? is this why my projects take so long?
@phatheadracingmx11 ай бұрын
This is the best video I’ve ever seen!
@phatheadracingmx
11 ай бұрын
Possibly biased but can’t help it 😂
@DIRTBIKEFAB
11 ай бұрын
Possibly 😂
@dalecronk437710 ай бұрын
Looks great, amazing work
@2WheelKam11 ай бұрын
The dishes are done man! What a great line! Don't Tell Mom the Babysitter's Dead
@DIRTBIKEFAB
11 ай бұрын
bingo!
@baby-sharkgto490210 ай бұрын
Beautiful work
@DIRTBIKEFAB
10 ай бұрын
thanks ya much
@caterpillar6nz31010 ай бұрын
amazing kx 250 sound very healthy
@chuckfry122710 ай бұрын
One and done …subbed. Excellent video
@DIRTBIKEFAB
10 ай бұрын
Awesome, thank you!
@ericprovenzano491911 ай бұрын
I've been thinking about getting a Phathead for my 19 KTM 300... now I have to go check it out... Nice job btw... The kit looks awesome.
@DIRTVENTURE
9 ай бұрын
you will love your bike again if you put on a @phatheadracingmx3166, phathead cylinder head... my kx 250 came with one... love it
@ODRoach10 ай бұрын
Fine KZread I’ll watch it jeez lol
@spencerftn111 ай бұрын
That's a sexy dirt scoot.
@DIRTVENTURE9 ай бұрын
you can realy see the differences in the newer frames... (this one in the video) VS (mine) 2006 kx 450 f now that being said... i was able to save the Yoke on MY kx f frame.. do you think the casting were of a poor quality? then the new versions of the kxf?
@jchevy335 ай бұрын
What this kit work with the '86 kx500 engine ?
@DIRTVENTURE9 ай бұрын
phathead cylinder head.... my kx250 i bought years ago... came with one of these .... they scream....
@DIRTBIKEFAB
9 ай бұрын
Best in the business in my opinion
@DIRTVENTURE
9 ай бұрын
agreed... but being in canada it is harder to get the ORings for the head @@DIRTBIKEFAB
@joshuaball887010 ай бұрын
Hey bud,can you tell me who you used for graphics on your recent projects. There’s so many companies out there I’m having a hard picking one
@DIRTBIKEFAB
10 ай бұрын
Yep. I use Sean from Dirt rider designs. He’s the absolute best. He has done all my graphics on my bike for the last few years. He’s super easy to deal with and does a killer job
@Danman197211 ай бұрын
Have you guys done a KDX200? That would be a great project. For the less "west side" folks. Be cool to see. One of the local HS guys had one done up in a 125 frame. Came up for a sale a while back.
@DIRTBIKEFAB
11 ай бұрын
I love the kdx 200s and 220s I am actively looking for a good donor for a conversion
@Danman1972
11 ай бұрын
@@DIRTBIKEFAB Saw a very clean 220 the other day. A bit to nice to cut up! Whole thing was in great shape. Of course they wanted a mint for it.
@panicrevracing5336
11 ай бұрын
I have a 2013 250f frame and a 2001 kdx 200 I am planning on doing my own conversion now. Would the TSR kit work with kdx?
@DIRTVENTURE
9 ай бұрын
i am thinking about searching for a klx on road bike.....@@DIRTBIKEFAB
Пікірлер: 34
A couple of tip to help y’all out. Turn your pre and post flow argone to be a little longer so you don’t t undercut your welds. Also turn the HTz to 180htz. It will buzz like crazy but you’ll improve the penetration and flow 😊 of the welds to be more effective.
Good to see you this a.m. have a great day. Remember to always measure twice and cut once! Works every time. ( just a little quilting advice from Mom) ❤️
@DIRTVENTURE
9 ай бұрын
measure twice cut short the take a bit more off lol better to little then to much... ????? is this why my projects take so long?
This is the best video I’ve ever seen!
@phatheadracingmx
11 ай бұрын
Possibly biased but can’t help it 😂
@DIRTBIKEFAB
11 ай бұрын
Possibly 😂
Looks great, amazing work
The dishes are done man! What a great line! Don't Tell Mom the Babysitter's Dead
@DIRTBIKEFAB
11 ай бұрын
bingo!
Beautiful work
@DIRTBIKEFAB
10 ай бұрын
thanks ya much
amazing kx 250 sound very healthy
One and done …subbed. Excellent video
@DIRTBIKEFAB
10 ай бұрын
Awesome, thank you!
I've been thinking about getting a Phathead for my 19 KTM 300... now I have to go check it out... Nice job btw... The kit looks awesome.
@DIRTVENTURE
9 ай бұрын
you will love your bike again if you put on a @phatheadracingmx3166, phathead cylinder head... my kx 250 came with one... love it
Fine KZread I’ll watch it jeez lol
That's a sexy dirt scoot.
you can realy see the differences in the newer frames... (this one in the video) VS (mine) 2006 kx 450 f now that being said... i was able to save the Yoke on MY kx f frame.. do you think the casting were of a poor quality? then the new versions of the kxf?
What this kit work with the '86 kx500 engine ?
phathead cylinder head.... my kx250 i bought years ago... came with one of these .... they scream....
@DIRTBIKEFAB
9 ай бұрын
Best in the business in my opinion
@DIRTVENTURE
9 ай бұрын
agreed... but being in canada it is harder to get the ORings for the head @@DIRTBIKEFAB
Hey bud,can you tell me who you used for graphics on your recent projects. There’s so many companies out there I’m having a hard picking one
@DIRTBIKEFAB
10 ай бұрын
Yep. I use Sean from Dirt rider designs. He’s the absolute best. He has done all my graphics on my bike for the last few years. He’s super easy to deal with and does a killer job
Have you guys done a KDX200? That would be a great project. For the less "west side" folks. Be cool to see. One of the local HS guys had one done up in a 125 frame. Came up for a sale a while back.
@DIRTBIKEFAB
11 ай бұрын
I love the kdx 200s and 220s I am actively looking for a good donor for a conversion
@Danman1972
11 ай бұрын
@@DIRTBIKEFAB Saw a very clean 220 the other day. A bit to nice to cut up! Whole thing was in great shape. Of course they wanted a mint for it.
@panicrevracing5336
11 ай бұрын
I have a 2013 250f frame and a 2001 kdx 200 I am planning on doing my own conversion now. Would the TSR kit work with kdx?
@DIRTVENTURE
9 ай бұрын
i am thinking about searching for a klx on road bike.....@@DIRTBIKEFAB
You got a link for the tsr frame conversion kit??
@boone7777777777
3 ай бұрын
Oh man jk I found it and it's 800 bucks dang
Those cases come already drilled 18 mm?
@DIRTBIKEFAB
10 ай бұрын
Yes they do