Amazon: Heater Blower Motor VW Polo 9N rex.red/heater-blower-motor-vw-polo-9n * Tools rex.red/car-tools-kit-mechanic * Cleaning rex.red/car-cleaning-supplies * WD-40 rex.red/wd40 * Torx socket set rex.red/torx-set-socket-45-55-60 * Jack rex.red/car-jack * Stands rex.red/car-jack-stands-heavy-duty * Gloves rex.red/car-gloves-mechanic * Safety glasses rex.red/safety-glasses-anti-fog * Spark plug removal tool rex.red/spark-plug-removal-tool * Spark plug Gap tool rex.red/spark-plug-gap-tool * Coil puller tool rex.red/coil-removal-tool * Car fuse set rex.red/car-fuse-kit * Battery tester rex.red/car-battery-tester * Maintenance kit rex.red/car-maintenance-kit * Subscribe and Ring the Bell to watch more videos. ION HowTo rex.red/ionhowto RedNumberONE rex.red/rno Buy merch store.ionhowto.com/ Check it, buy it, post it and tag it #ionhowto or #rednumberone Join this channel to get access to perks: kzread.info/dron/x4Qbp3iC97kQzj7e7g7slg.htmljoin We earn money from qualifying purchases using our affiliate links. Affiliate links are marked with a star. * When you use our * links, you support this channel. As an Amazon Associate I earn from qualifying purchases.

@galaxyj1037

Жыл бұрын

Available in UAE?

Thank you so much I was prepared to pay someone £60 just to and see if they could find the problem and then also pay for it to be fixed and parts. Had a quick look at your video and thought I'd try. I am a woman that has no experience with cars. Was so simple to do I managed it fine. It worked! Thank you so much you have saved me money.

Welcome to Volkswagen: Transforming drivers into mechanics since 1937.

@IONHowTo

4 жыл бұрын

It's sad but true. Most cars will do that if they still drive. I'm not a VW fan but the parts are cheap and easy to find at least. Wish I was driving a better car but this is still driving fine.

@itupetermotebegmail.commot4234

4 жыл бұрын

Hi

@user-tb2wz1tr8y

3 жыл бұрын

Hahahah. Great response, and pretty true, at least for me. This said, I've learned a lot through the process, so it's not all bad.

@Jojo-lf3dy

3 жыл бұрын

Even im becoming one with mine but still can't figure out the problem after replacing many parts

@BasszusX

2 жыл бұрын

Thats right man!

Didnt think this would work but gave it a try anyway. Hey presto! EPC light gone and car revving as should. Great cheap fix thanks so much!👍🏻

sr. thank you so much on your 9n problems article. i can't believe it took me 2 years to find your videos. greetings from a 2.0 sedan owner from brazil

@IONHowTo

2 жыл бұрын

Wow thanks a lot for reading and watching! Yeah those are the biggest things I could remember.

Thank you man .You are the best!!!! I just did it and now it is OK.. Love from Greece.🇬🇷

@IONHowTo

4 жыл бұрын

I know how you feel! 👻 Thanks for writing!

@teo131x

7 ай бұрын

καλησπερα αδερφε σου δουλεψε? εχω το ιδιο προβλημα ο μηχανικο μου αλλαξε αισθητηρα μαπ διακλαδωτηρα νερου και σωληνα νερου αλλα παλι τα ιδια κατι κανει αναβει check epc k enggine και το ιδιο κανει οπως στον τυπα με το βιντεο θα το δοκιμασω και γω

Worked perfectly for my 2002 1.8 Beetle

Thanks a lot for this. I'm having this same problems with my 2009 Passat FSI

Thanks for that saved the day and a trip to mechanics I wasn't sure whether to use wd40 or some thing else but after watching your video now I am confident to use this product and save me buying electric wire cleaner spray.

@IONHowTo

6 жыл бұрын

Thanks! :) I had proper contact cleaner spray before but when using that, the problem would come back much quicker. Same for the re-circulation flap motor. I've cleaned that potentiometer because the re-circulation flap was going crazy moving on it's own. When using proper contact cleaner on that pot it would last a lot less that WD40. Just let the car cool down a bit and use lots of paper towels/rags :)

@SiboneloHlophe-nm6wk

9 ай бұрын

Carb cleaner is fine?

@SiboneloHlophe-nm6wk

9 ай бұрын

@@IONHowTo carb cleaner is fine to use?

@IONHowTo

9 ай бұрын

@@SiboneloHlophe-nm6wk special contact cleaner spray or wd40

Good advice thanks.i just bought a 2004 polo sedan 1.6 petrol and it has some issues with leaking coolant pipe somewhere near thermostat housing.will follow your advice with interest (Ron from Australia).7/8/20.

For me it was brake light switch , cheap and superfast replacement 😊

Thank you so much i was so stressed

Love your fixing and saving, i will fix mine tomorrow morning, thanks you sir

@SiboneloHlophe-nm6wk

9 ай бұрын

Fixed?

I thank you so mouch. 3 month noboddy find the mistake. Yesterday i saw your Video. I clean it and ist all very good. Thanks

@IONHowTo

5 жыл бұрын

Cheers! 😀

Mine was idling normally but jerks when i drive it at low rpms.. turned out to be a faulty egr valve i cleaned it wirh a carb cleaner and worked like a charm.

@SiboneloHlophe-nm6wk

9 ай бұрын

Egr valve is a throttle body?

THANKS MY BRO!

Top man ,thank you for this, worked a treat!

THANKS so much! surprised such easy access and presto! Saved my wallet!

@aniezaliezas6451

4 жыл бұрын

Tks

Thanks worked for me

Thank you for this video!!! Now I know how to fix EPS light problem!!! 👻👻👻

@IONHowTo

6 жыл бұрын

EPC 😂😘

@ilarisa

6 жыл бұрын

Dragos Ion oh yeah 😂

Thank you soo much bro!

Thanks a lot for this video

Great job!

hey bro nice video it also worked for me but if you want a once for all solution it would be chaging the trotttle body wire plug vw sent out a bulleting adressing this issue once you rewire the trotle body connector you wont ever have to use wd on the plug ever again

Thanks..It works....

Incredible thanks man❤Work for me thanks for saving my money❤❤

Thank you so so much ! 😍😍😍😍

Maaan! Thanks very much!!! Worked instantly with contact spray!!! Mersi fain!!!👍🏻😎

@SiboneloHlophe-nm6wk

9 ай бұрын

Carb cleaner?

Tnx that was helpfull

Thank you Bro 👍

It happened when me and my brother where in his Volkswagen Gli having fun in the snow it felt like it had 20 horsepower

Had epc light too, had the trottle body replaced but after few days the epc light litted again..went back to mech the dam light werent there anymore, test drive a few round nothing happen...hope ur method works. Keeping fingers crossed.

@IONHowTo

6 жыл бұрын

Tried cleaning that throttle body and made it shiny but only messing with this electrical connector fixed it for me. Hope for you also! :)

@mushtez

5 жыл бұрын

Did it work Samuel?

Thank you for this video Dragos. I have just done this to my son's car. I have subscribed to your channel too.

@IONHowTo

6 жыл бұрын

Great! Thank you! 👻

@tshegofatsomathew8159

4 жыл бұрын

Hi my problem is when I drive my car the light come out and switch off the engine the light go away what is the problem

You are perfect ....thank you👍👍

@IONHowTo

6 жыл бұрын

Thank you! 👻

Thank you very much.

Thank You for Lesson.

Thank you

Mulțumesc ,Dragoș.

Thanks it help

wow amazing!

Hi great job

Thank you, l ppreciate

Works! Thanks

Thanks a lot

“This is an older clip,filmed with a potatoe.” LmfAO

@IONHowTo

6 жыл бұрын

😬

Thanks a lot.

You r the best

Thx, it's work

Thanks sir ji..

Thank you for your help.!! Problem solved!!

Nice 1 thanks

Thank you so much. I have the same problem with skoda fabia 1.2 but my problem is that when drive upp hill and turn to the right then the epc light is on. Maybe its a matter of wires. Will give it a try today ☺️

@bekonface

2 жыл бұрын

traction controls

@lovesoul30

2 жыл бұрын

@@bekonface I solved the problem. It was a cracker plastic hose for the pcv valve

Bravo!

Thanks.

I have the same problem with my vw golf 4. The engine light and epc are on. I will try this tommorow on my car. Thanks

@ayazmohmand1780

5 жыл бұрын

Rakesh Soekhoe did it work bro

I will try

Thank you for the video it really helped me out. Thanks

What about if polo 6 failure to start not even turning the start or display epc light and gears? But other light like battery light, oil light and fuel Guage will displayed

Hi friend, I liked the information... look, in my case I don't have any light on the panel on, but when I travel 700km, the pole turns on several lights and almost goes down, but then everything is fine, there are no errors that crazy...🙄🤔

@IONHowTo

2 жыл бұрын

Check coolant level and check that engine temperature does not rise slightly when you press harder on the gas pedal. Should be fixed in up position around 90 degrees.

Have polo 2009 the check engine,Epson and spinning lights have failed to go off looses power

Worked in my Mk5 GTi today..was unsure but it runs fine now. EPC light gone off and scanned with OBD2 and no code.

@SolomonBafedile-dm2qs

6 ай бұрын

How did you fix that because i have same problem

Thank you very much for this instruction. But i have a question. Where is this throttle body in the car? Do we need to open the engine somewhere? I am looking forward to hearing from you. Best regards from Stuttgart.

@IONHowTo

3 жыл бұрын

Throttle body is behind the engine, where the air filter goes to.

I have a 2004 VW Polo 1.4 BBY engine. Just replaced 16 Valve Stem seals WITHOUT REMOVING THE HEAD and now the EPC light has come ON. Will try this trick and see what happens. VW's can be a pain sometimes, but good Cars to drive.

@IONHowTo

3 жыл бұрын

No need to defend their brand. Hope you get it working.

Hello i bought this car from 10days ago , well i don't have the epc on but the car accelerates by it self like the video but for 5mins and then stop should i do this method ?

Do I have to do the same thing on my polo vivo 2016 model?

my Golf mk 4 GTI model 2002.code p2128 and epc light >> The gas pedal does not work .. but when I put my feet on the brakes moving a car and the brake pedal was working as a gas pedal and brake at the same time ,,Is there any help?

I have the same symptoms and the car will also not accelerate. Does this happen with youra as well?

I'll try it with my daughter car tomorrow, wish me luck.

Hi my car is having a problem of losing power sometimes there machine says is maf sancer

Change your crankshaft sensor fixed mine

Hi I have a same problem didn't know how to fix it and today I took it to electrician as he said we have to change petrol pump, filter and fuel relay as the relay was keeping clicking when d car rev itself we did change all those things now the car doesn't start no spark 😠 please help🙏

I changed the water pump, tensioner pulley and belt on a 1.2 Polo AZQ, and the throttle suddenly is a bit "awkward", but nothing bad, after driving a bit, the epc light came on and the engine just doesn't accelerated, after turning it off and on again, no EPC light and it was like before. I do have a MIL Light on but it is because of the o2 sensor. But replacing the waterpump, belt and pulley can't have anything to do with this? I mean, there is no connection and I don't know why it just began after that! Could it be because of a bad o2? I've read online that that can also be the problem. Maybe someone can help me out. Thanks

Good day

mine used to do this until i finally replaced the CAT and the front and rear sensors its been fine for years until recently i tried to rev and pull away and the stupid light came back, i stopped turned engine off waited a bit then started engine, the light stayed off all way home.

My car does the same thing bt i've change fuel fulter and filter but when they diagnose it shows the open circuit why now i'm confuse pls help me

Bună am un vw polo 9n3 1.2 12v bzg am probleme la prima pornire dimineața sau după ce sta vreo doua ore îmi turometul im cade și la400 de ture și îmi moare motorul ca și cum nu as avea decit un piston după ce se încălzește puțin funcționează perfect pe tester nu da nici un defect buji noi bobine de inducție noi senzor turație nou dacă ma poate ajuta cineva???

My EPC and stranding light on when i run vw polo and my speed meter does not work please help me

Hi how can you reset break light warning on VW polo please

Thank you very much for this video.I bought a car vw polo 1.2 from 2004 and it has AZQ engine.The car had this EPC problem but it was not coming at starting mostly after driving 15-30 minutes epc light turn on and car goes to limp mood.I took the car to mechanic and he told me to change throttle body, throttle padel, lambda sensors and catalyst and i have done everything but problem wasn't sloved at the end mechanik told me to change the engine control module and i have ordered that but while i have ordered that i found your video and i have ordered the throttle body connector and i gave it to mechanic to change the old connector and replace with new.And now the car is not throwing any problem and running like a charm just now i am concerned about only intake temperature because in obd2 it is showing while i am driving the temperature is going up to 80 degree.Is it a bad intake temperature?

@IONHowTo

3 жыл бұрын

Temp in dashboard should be straight up at around 90 celsius. I'm glad you got it sorted but that mechanic oh my... He threw parts(and your money) at the problem too much.

Thanks that was very helpful but i got a problem i smell petrol from the tail pump what should i do and what's the meaning of that i hope get answers soon and thank you

@IONHowTo

3 жыл бұрын

It means the engine is running 'rich'. Probably fuel economy is not great too. There could be many reasons for that. This is one of them. Could be any of these or more: Fuel injectors, Engine wear, Spark plugs, Induction coils, O2 sensors, ECU. These are few reasons I can think of is the smell comes from the tail pipe. Otherwise it's more dangerous if petrol is leaking anywhere from the tank on it's way to the fuel injectors.

@mehdielgharbi4104

3 жыл бұрын

@@IONHowTo thank you for your help i really appreciate

Hi i got the same problem

Hello thank you for the video I’m from tunisia and maybe we don’t have the same cleaning product so can I use any product ? I’m gonna try to do this after a year and a half trying to find a solution for this problem

@IONHowTo

5 жыл бұрын

You could use contact cleaner spray for electric / electronics. It won't last long like that but it's easy to repeat.

@hamzalahmer2941

5 жыл бұрын

Dragos Ion can you please give me the name of the product you used maybe I’ll find it here or ask someone in europe to send it to me and thanx a lot

@IONHowTo

5 жыл бұрын

WD-40... the Contact had some name but don't remember. en.m.wikipedia.org/wiki/WD-40

Hi, I have problem wi the servostyring

Goodnight. The temperature sensor light stays on even when the car is cold. Polo 2002 1.2 9n. I already changed the water tank but it didn't fix it. Thank you if you can help. Thanks

@IONHowTo

Жыл бұрын

Try to use an obd2 reader to get some error codes if any. I read some comments that it could be a bad solder joint in the dashboard but I think it might be the coolant temperature sensor. Not sure really.

Hi I have a 2008 FSI Golf and I have a problem in the light of EPC what name the pieces that you cleaned

@IONHowTo

6 жыл бұрын

It's the throttle body electrical connector. Should be very similar on your car. If your car has those symptoms, it's worth trying to clean it.

how to fix EPC light 2009 audi A4 Quattro. please advise

Have you had a problem with no error code on 2002 polo going into limp with no notice. After driving fine for 500 miles plus replaced two cylinder coils and all plugs. Was running great for past month until tonight. Is there a fuel filter. It’s hard to diagnose with no code. Just popped into limp mode

@IONHowTo

5 жыл бұрын

There is a fuel filter but I bever had problems with that. Coils are always going bad on these cars. 😅 When the coils in mine were bad it had misfire codes in engine scan.

Hi! My car's EPC light came on and the car went into limp mode. First I changed the throttle body but still no improvement. Next I changed the Electronic accelerator unit and now the car only cranks but won't start at all.

@IONHowTo

5 жыл бұрын

Needs a scan for error codes. That could give you some hint of what’s wrong.

@steveooo4915

5 жыл бұрын

Nirshad Singh ki

@mercianlucas1232

3 жыл бұрын

Did you ever find the problem?

Am rezolvat problema! Am sters senzorul si a disparut martorul in bord! Ms mult pt sfat!

@IONHowTo

6 жыл бұрын

👻

@claudiusomanescu9850

6 жыл бұрын

bună spunem și mie cum ai rezolvat problema cu epc

@claudiusomanescu9850

6 жыл бұрын

bună spunem și mie cum ai rezolvat problema cu epc

@claudiusomanescu9850

6 жыл бұрын

bună spunem și mie cum ai rezolvat problema cu epc

@Eine_stolze_rumänerin

5 жыл бұрын

Unde e situat senzorul?

Felicitări, in primul rand pentru iengleza, hibrid intre Iliescu și bendeac, bravo . In al doilea rând mulțumim pentru rezolvare ești foarte bun. Spune mi te rog , daca folosesc spray wd 40 contact cleaner, este ok , își face treaba? Mulțumesc anticipat,

@IONHowTo

Жыл бұрын

De obicei comentariile din Romania de trolling si am oftat cand am inceput sa citesc ce ai scris dar mi-am revenit in partea 2 haha. Stiu ca normal se foloseste contact cleaner si am tot citit dece wd-40 e rau ca strica acolo contactul. Pentru mine, wd-40 merge foarte bine. Varianta clasica si ce e mai important, tine mult. Daca dai cu contact cleaner in cateva luni sau 1 an ai probleme iar. Cu WD-40 1-2 ani merge. La fel si la clapeta de recirculate - potentiometru. Era cineva de intreba mai devreme pe alt video de aia. Curata clapeta de acceleratie cu CARB SPRAY dar fara sa o misti, doar pana la clapeta in interior. Daca tot umblii acolo poti sa pornesti motorun cu filtru scos si sa dai spray scurt jumatate de secunda in clapeta de acceleratie - admisie asa se mai curata chiar pe linia unde e clapeta - poate sa fie mizerie mazga ulei sau resturi carbonizate acolo. Motorul se tureaza putin cand dai carb spray, e normal.

@bogdangeorge7881

Жыл бұрын

@@IONHowTo Mulțumesc pentru clarificare. Incerc și eu sa vad ce rezolv, eu am o Lancia, simptomele sunt asemănătoare, am văzut că și la Fabia sunt probleme. In general motoarele, mici, , care au răcire deficienta, acolo apar toate tipurile de probleme din cauza căldurii excesive cât și a " anului de fabricație". Mulțumesc

@IONHowTo

Жыл бұрын

@@bogdangeorge7881 sper sa se rezolve. Poti sa ii faci un obd2 scan sa vezi ce coduri apare.

@bogdangeorge7881

Жыл бұрын

@@IONHowTomulțumesc pentru sfat. Nu afișează erori. E doar "nouă" din 2006.

My car sometimes does the same, but other times the powersteering light would go on and i would lose powersteering, the clock will reset, and an alarm will beep twice. I then switch off the car and start it again, and everything will be fine again. Do you think this will also fix my problem?

@Carlosmartinhox

Жыл бұрын

Olá amigo... como você resolveu essa situação do seu vw polo? Pois tenho uma situação idêntica, mas nem um erro aparece 0 erros 🤔 mas por vezes acontece ligar abs airbag direcção... desligo, ligo, e já está tudo bem por uma semana 😂

Hi just I want to know how can I fix my car that epc

My epc light came on when I was on motorways last night. I didn't notice any change in car and drive to services about 12 miles away and when I turned car of, it started again without light on and I finish my travels of 65ish miles. Confused as to why ?

@TheCrysisFIN

5 жыл бұрын

Did u get The EPC light again? I got The epc light and i just shutdown and started again and no EPC light.

Just saying. Hay liked and subbed.

@IONHowTo

5 жыл бұрын

Thanks man

Do you have any ideea why the check engine light won't show up?( I have a 9n3 1.2 bbm with same light missing even since i bought it)

@IONHowTo

6 жыл бұрын

Either the previous owner put tape over it to hide problems or like in my case, the light just does not work. I opened it to check if there is any tape in there and the led is just burnt. I had the buzzer not working also. That one I fixed by replacing rhe burnt speaker with a keadphone speaker. Works perfectly. I have older log videos that will make a nice a youtube video for removing the instruments cluster and fixing the speaker. Please subscribe to see more of this and to help us. We need 1000 subscribers by 20 Feb. 🙁Please do it, we need help!

@zxz1357

6 жыл бұрын

Hi can you upload the videos about how to remove the instrument cluster and change burnt out LEDs :D Mine has a bunch so Im not sure if I have some errors or not. Thank you!

@IONHowTo

6 жыл бұрын

zxz1357 I might have a few videos from when I’ve opened it but mostly photos taken for reference. To know how to put them back. 😁 When I opened it I just changed the speaker because it was not working. Used a headphone speaker and works perfectly. If you really want to do this, be prepared to mess up your instrument cluster. 😬 I wouldn’t open it now unless something really important stops working. You’d have to remove all the indicators from their motors and those are a pain to put back in the right position. Without a VAG-COM or VCDS interface, it cannot be done well. VCDS had a mode that puts each indicator needle to zero-middle. With that you install them. If you don’t do that, the indicators will work but showing you the wrong speed/ fuel left/ rpm. Better leve it or order a VAG-COM interface now if you don’t have that already. Not sure if I’ll find enough video to upload but there must be something, if I do it won’t be soon. 1-3 months. 😅 Won’t be able to show how to change the LED, because I didn’t feel that lucky and with no spare instrument cluster or car, didn’t want to risk breaking the car too much. 😅

I'm having the same issue after cleaning the EGR and throttle body. Do I have to disconnect the battery before cleaning this connector?

@IONHowTo

2 жыл бұрын

No need to disconnect the battery but key should not be in the car/ignition.

@sakreth1113

2 жыл бұрын

@@IONHowTo UPDATE: your solution worked on my Seat Toledo 1M. For those who has the EPC light on after this: try to drive around for a half an hour, if you have climate control try to turn it on for a while , after this you have have a nice stable idle.

I would like to know how to remove the airbag warning light on my VW polo 2008

@IONHowTo

4 жыл бұрын

Take it to service and get the airbag fixed/replaced.

My 2003 elite polo has had exact issue. Revs will go up and down, then EPC light comes on the car is running very rough and eventually just turns off. Tried this trick and it worked for 24 hrs. The throttle and accelerator have been changed. Any ideas?

@IONHowTo

Жыл бұрын

You used any spray?

Hey man...i have the same problem and i buy new throttle body and i still havee the same problem...?!?!

@IONHowTo

5 жыл бұрын

Check the connector of the throttle

Hi I tried to look at that switch but it still like that....