EP16: Super Easy Scarf Joint Jig for Ribs, Chines & Stringers :-)
Тәжірибелік нұсқаулар және стиль
DIY 32' Boat Build: Quick, Clean & Easy Scarfing Jig Using a Table Saw for 1"x3" stringers, chine logs or sheer clamps. Need to make short wood into long wood? Then this is for you!
See my 4 other scarfing methods videos below
(Scarfing 101):
1. Plywood Scarfing Jig: • DIY Plywood Scarfing a...
2. Folding Wedge Scarf for large beams/studs (2x8x10's): • EP12: How To Create An...
3. Payson Joint Scarf for plywood: • Payson Joint - Lengthe...
4. Keelson Butt Scarf: • EP21: Scarfing a 32' K...
I'd love to have you come-aboard and join me in my journey... Please subscribe and say Scallywag!
↓↓↓↓ ↓↓↓↓ ↓↓↓↓ ↓↓↓↓
⚓ Get Your FREE Copy of "Income Ahoy" Here - Over 300 Live-Aboard Income Methods: reneandralu.com/income-ahoy/
✔ Buy me a piece of wood: www.paypal.com/paypalme/reneb...
✔ Subscribe Here: / @mydreamboatproject
✔ Contact Email: renebastarache@yahoo.com
Пікірлер: 9
That idea works great - one suggestion is to use a "few" 1/8" dowels as pins (say 5 in a 2x1x2 pattern) . Makes it a LOT stronger and no movement when drying or under stress. Even toothpicks will work.
I’ve never thought of using a dead table saw as a work support for a working table saw! And if the new saw is the same model as the old one, the height will match perfectly! EXCELLENT!
@mydreamboatproject
8 ай бұрын
Thanks, It works fine for me but is a bit heavy to move around. When I get the time I'm going to strip the saw and components off of it. I'll have plenty of spare parts for the working saw as well.
@ruidadgmailcanada8508
8 ай бұрын
@@mydreamboatprojectbrilliant idea! Table extension with spare parts!
@mydreamboatproject
8 ай бұрын
@@ruidadgmailcanada8508 Don't you wish they sold them all that way? lol
Thanks for sharing this technique.
@mydreamboatproject
11 ай бұрын
You are so welcome!
Neat jig idea. I have to often splice stair stringers on the flat for 16 rise stairs and up. I place them on top of each other as if it was finished size, screw them together, leave 3’ overlap, mark a diagonal line across the overlap, then cut with a circular saw and diy track. Then 1-3 passes with a handheld planer and I get a beautiful joint. Now you’re inspiring to build a boat…more like an Ark to survive the coming deluge. Lol but not. 😅
@mydreamboatproject
8 ай бұрын
Glad I could inspire :-) I'd like to know more about the splice you mentioned but you lost me a bit there. I guess I'm a visual learner. lol