25 PRC as my number 1, but 338 prc is a dang close second!

I had bought both the 300prc and the 6.5prc in anticipation of the 7. The 300 is definitely Thor's hammer! With a little weight and the right muzzle brake, the recoil is very manageable. Im currently working up a load for the Barnes 208gr LRX bullet but would love to try the 190CX. With that being said, the 6.5 is my baby. Its everything I want. In fact I will probably build a 2nd rifle in that caliber. The 147gr ELD-M has been devastating on everything Ive shot. Looking forward to a 7prc build for a friend very soon. Thank you for your continued work and development on these new cartridges and these high BC bullets. Its making long range shooting easier for the average person.

I love 300 PRC! If you don’t own a magnum 30 cal that’s the cartridge to go with!

@sinistersilverado965

4 ай бұрын

yeah, I already have a 300 Weatherby, so I bought the 7mm PRC

I loved my 6.5 PRC, but then the 7 PRC got announced and yup re-barrel my 338 win to 7 PRC and man is that just sweet.

@RepublicofTX

3 ай бұрын

Love mine too

I still like 280 Ackley Improved....such low recoil and really gets out there

@andrewfischer1311

2 ай бұрын

That's my choice as well.

Seth, you said it, and I agree. I "HAVE ALL THREE". working on load test/development on the 6.5 this weekend. All my PRCs have two load solutions; one for a CX and one for either the ELDX or Berger VLD.

Great video, love yalls podcasts. I guess my only question, right now Hornady has a factory hot rod in the 7RM, (that I have) with the 139 gr SST at 3240 MV, any thought to adding that weight to the 7 PRC, then that would truly cover everything from groundhogs to elephants lol in the 7 PRC. Thanks again for doing these podcasts.

Thanks for this Hornady Podcast. It was interesting to hear the perspectives from each of you. My cartridge proposal would be something along the lines of similar velocity to the 6.5 creedmoor in 7mm option. I have heard people doing a 7-6.5 PRC wildcat, but it would be nice to have a factory option. I also think it would appeal to those who don’t think 6.5 is enough, but also want something with a bit less recoil.

I shoot a 6,5 PRC as hunting and sporting caliber in a Ruger Precision Rifle here Germany. I dont mind the weight as my hunting is from a high stand for safety reasons (angle toward the ground) only and the walk to that is seldom more than half a Kilometer. I need a minimum of 6,5 mm bullet diameter and the 6,5 PRC compliments my 6,5 Grendel. Great Podcast as always. Greetings from Germany 🍀👋🏻.

I am looking forward to that 338 PRC!

@glennllewellyn7369

3 ай бұрын

Ok, lol!

I have both 6.5 and 300 prc. I love them both, but I always seem to pick up the 6.5 for everything including elk. My max range is 600 yards personally

@ChronicalsofAl

4 ай бұрын

The only problem is the 6.5 PRC doesn't need to be limited to 600yds!! Heck, that's where it really starts to shine

I’m most impressed with the 6.5prc. I own a 6.5 and 7. The 7 would be great if it easily did what was claimed (3000fps) but I’m at 2835 with a max load of h1000 with a 175gr bullet. I’m honestly more impressed with my 280ai. 300prc I see zero advantage over a 300wm for hunting. Just my honest opinion.

@mattc6015

4 ай бұрын

I’m interested what length barrel you have on that 7prc?

4 ай бұрын

That’s why I’m scared about getting a seven PRC. This is what I constantly hear about is the performance is not 3000 at all. I really want a seven in my arsenal and I was hoping seven PRC was gonna fit the bill. I plan on running a 20 inch or a 22 inch what barrel length are you running buddy I need to know lol.

@ronlowney4700

4 ай бұрын

🤠 I Feel the Same Way About the 280 AI (and 270 Winchester)! However, the 6.5 prc and 7mm prc are still very "Sensible" Cartridges! 🥳

@richwc1

4 ай бұрын

22” no way I’m ever going to hit 3000fps with a 175. Not with h1000 and hornady brass that for sure.

@richwc1

4 ай бұрын

@@mattc6015 22” seekins element.

I fell in love with the .300 PRC I got two of them both with brakes the HMR is a factory muzzle break the other has. Salmon River muzzle brake. It's on a wilderness Ridge about 1.5 lb lighter than the other and my grandson loves shooting it as recoil is reduced by +90%.

I have all three. 300 PRC is just magical, mine and all my buds that have one all shoot lights whether they are factory rifles or customs. The 7PRC has a ton of promise just haven’t shot it much. 300 with a brake is easy recoil but the 7 with a break is very low recoil.

Might not be enough who agree, but for my part I would love to see the RCMs modernized and revived as part of the PRC family. But great job with what you've already done.

I'd like to suggest barrel contours and dimensions as a topic for a podcast, specifically the question of what barrel contour do you need as you move up in cartridge size? The Remington Varmint/Sendero (Proof Sendero Light) is very popular, but has a very short shank which may not be ideal for large magnum cartridges like the 300 PRC. We've seen issues in testing carbon fiber barrels with these larger and more powerful cartridges. I notice that Proof no longer offers barrels in Sendero Light contour longer than 22" for 7mm and up. What's your recommendation on barrel contours and material for larger, more powerful cartridges like the 300 PRC, 300 NM, etc?

I run short barrels on 5 of my guns. Remington XP-100, in 7mm RSAUM (17.5” bbl; 162 ELDX @ 2850 fps), 30 Nosler (18.5” bbl; 210’s @ 2825 fps). The 7mm PRC is the one I’m likely to do next in a rifle with at least a 24”-26” bbl, or the 6.5 PRC in an XP-100 with a 17.5”-18.5” bbl As much as I like the 300 PRC, I’ve got a custom 300 RUM that leaves the 300 PRC in the dust, but it’s a custom chamber that basically fixes the issues with the SAAMI chamber. Nice podcast. Keep up the good work. No need to run faster powders for shorter barrels either (well documented by handgun hunters/shooters over the past decades).

I have a savage tactical desert in 6.5 prc and i love it. I kind of want to build a 300 prc now.

I shoot the 6.5 PRC. It groups the ELDX a little better than the 147 match bullet. I hunt with the match bullet-it just works near and far. Thanks Hornady where would we be without y’all!

I think the 6.5 is the best all around hunting round of the three. Short action for a light rifle, least recoil, and basically 270 (or better performance. That’s a winning combo. I also think a 7mm on the 6.5 case would be cool. And maybe a 338 on the 300 case.

Great podcast once again. Its great to listen to other people's experiences , options and for sight . 22inch 7PRC could be the winner for me . ....... My 25PRC is like lighting with the 134 Hornady Eldm !!!

All the PRCs not just these three lol. I would love to see .338 PRC be the middle ground between 338 win mag and 338 Lapua. Shooting a 250 grain plus CX would be awesome.

Very curious to hear your guys’ perspective on the future of the WSM family now that the PRC line up is getting so much attention. Have your lab guys ever tried lengthening the throat on the 300WSM to get those longer bullets to work in it? Any chance it could give the benefits of both the 6.5 and 300 in one cartridge?

A 338 PRC would be great.

@jeffwilliams3436

4 ай бұрын

That would be awesome! Might as well make it a 35 PRC for African safari game 😂

@drakeslocum2564

4 ай бұрын

@@jeffwilliams3436 anything below 375 is illlegal for African dangerous game

Per the podcast request. Please neck the 6.5 down to 6mm PRC to create the ultimate Midwest coyote/deer combo. Also neck the 7 PRC down to 25 for a Western Laser Beam and up to 338 for an All Around Alaskan Cartridge (focused on 225 CX and 230 ELD-X). Also I will use this platform to continue to plead for the reintroduction and support of the RCM cartridges 😊

@Inveniam22

3 ай бұрын

You don't pay attention to Hornady much if you think they're in the business of just necking down cartridges to be fast and overbore. You can find those already as well.

The 6.5 is amazing for hunting deer in the open spaces of Montana!

Are there more PRC calibers coming? .338 PRC? A modern .338 would be great.

A little off topic, but what muzzle brakes are you using on your rifles?

Thanks guys for an excellent and entertaining discussion. One thing I would like to have heard you mention would be the optic/reticle choice on your personal rifles.

@offroadsoda

4 ай бұрын

such a nuanced decision in the end. Also, what can you afford.

For my purposes here in Alberta, and I've hunted BC a lot, the 6.5 would do fine, a 7 would too, but, a either would have to be in a carefully built gun with the right stock on it. The stock makes more difference than most people would ever believe, design and material it is built in matter. Can't have suppressors here, no use for a brake, so it'll be a 24" bbl either way. I'm not running out and buying a PRC, don't need it, I have used 7-08 on everything up to moose, had 7RM's and a 338WM and 450-400NE, still have a 300H&H too. The go to now is a 30R Blaser, will test out a 6.5CM,, the 7-08 and the 300 are there, if I want to use them

I already had a 6.5 creedmore and a 300 win mag. Didn't own anything in 7mm so the choice was easy. 7PRC. It is likely I will own all three eventually.

The performance that people get out of the PRC line in short barrels is impressive as well. A 6.5 PRC in a 16.5 inch is impressive considering the less than ideal barrel length.

Love your podcast ❤

I love my 300, put a can on it and it is a baby. Just purchased a 7 interested to see how it does always been a 30 cal guy. I shot the 7 through Chrono an at 6.5lbs its got plenty of recoil. Was disappointed in 2810 when its suppose to be 2975, 22 inch barrel so don't think it would have lost that much in 2 inches.

Something along the lines of a 22PRC would be great fun. Cant wait for my 7PRC to show up at my local gun store.

I stopped by your booth at the dsc show and had a question and the gentleman at the booth didn’t have an answer for me. I’m curious what the minimum expansion threshold velocity is on the bore driver eldx projectile.

❤my 300prc..... VERY VERY accurate when paired with 5-50 '56mm or 4 - 40 thermal ...... ..!

I am a big fan of the 300PRC.

Great discussion 👍 I just bought a 6.5 prc barreled action for a precision build. I did about 3 months of arduous due diligence for making the decision. I have a 300 WinMag, 7mm Rem Mag as my "big guns". With the choices in factory loads and especially with developing hand loads, both of them will do anything I want to do, at the cost of recoil. I want to get into the LR target arena and I just didn't feel like my 25.06, 22.250, 7.08, or.308 win were capable of being competitive even with load development. There's just not a selection of really high performance projectiles and with the case limitations, I figured I should get something made for the task. Would it be fun to have a 25cal prc? Sure, but it's basically a 6mm and we've already been there and done that. A 270 also occupies an in between area plus with the 270wsm, what you don't like about the regular 270 can be achieved. It would be cool if better projectiles for some of the existing calibers were developed, that would be fun, but I get it ; for the cost of R&D you probably would never make the money back or they would be cost prohibitive for the consumer. I think you guys did exactly what should have been done, by taking 3 popular and common rounds and working them to the endth degree 🤙 Thanks again!

For me the 300 PRC, as I have all reloading equipment… But a 7 would also be nice… maybe when one of those barrels are through.

Short action, least recoil, I live in TX, the 6.5 PRC does everything I need and then some.

I went with the 7mm PRC with a 22" barrel. I chose it for versatility. From pronghorn to brown bear, I think this could do it. Are there better choices at those extremes? Sure. But is there a better choice for doing ALL of that? I doubt it. I haven't shot anything but paper with it yet. Shot some of the Precision Hunter but I have a box of Outfitter I want to try. I would love to see a 25 PRC! (In a true short action, rather than the almost-short action of the 6.5") Something like that might put my 25-06 out to pasture. And maybe I'll get a 375 Ruger for that brown bear.

225 eldm out of my 300 prc going 3000 fps(26” barrel loaded with max load of lrt off hodgdon 1-8” twist) flatter than the 180 eldm going the same muzzle velocity. Checked with 4dof. With a 7 prc you just need a 30” barrel to hit box posted velocities. It’s sad to see that the 7 prc doesn’t hit advertised velocities. Will you add the 6.8 western, you mentioned the .277 prc as an option, it would just be a remake of it.

@seetownwv

4 ай бұрын

I shot the 180 ELDM factory 2975 22 inch barrel, 2810 avg. Pretty sad. Im gonna handload so think it will do better. I love my 300 but with 26 inch barrel an suppressor its a field gun lol

@JosephWilhoit-ef6nl

3 ай бұрын

The 7mm prc will hit 3,000 have already got 3,020 with 170 terminal ascent Hornady ammo u gonna get 2,850 I do not like Hornady ammo or bullets

@seetownwv

3 ай бұрын

@JosephWilhoit-ef6nl I figured Federal would do better as it most likely is loaded with RL26 when I get gun back I'm going go try a box. The terminal ascent remind me of the old Interbond bullets which I loved but better BC. I'm still gonna hand load but wanna try out of curiosity. It'll be 18 inches but I bet it'll do better than Hornady with 22 inches

I dont need either for hunting, the 450 bush is ideal in my state but i think the 300 prc is my favorite, i have a couple places you can go out to a mile and that ammo is not that expensive for how large a round it is

I have a question about powder selection for the 6.5 PRC to keep the velocity up in the 2900 to 3000 fps range. What is your choice H1000 or RL26?

@keithlabrozzi7176

3 ай бұрын

My Ruger likes LRT 140gr. My son's CZ likes Magpro 147gr.

When are you guys coming out with the 45-70 PRC 👍🏽

@glennllewellyn7369

3 ай бұрын

Hah! Love it. Surely for rats-in-the-shed scenarios only. Australia!

I’m looking forward to a VT loading for the PRC’s

If you're a one gun kinda hunter, go with the 7 PRC. You might be a little over gunned for some things and maybe a little under gunned for other things, but it'll do the job for most things. If you want 2 things, pick up the 6.5 and the 300

@z987k

4 ай бұрын

There is nothing in North America you are under gunned with a 7prc.

I bought a Fierce 7PRC and it’s shot great so far. Haven’t shot it past 300 yards yet though. I’m starting to have some serious questions about Horbady’s stated box velocities. There are a lot of people out there showing 150-200 fps lower than what Hornady says it should be shooting. Very concerning

@ChronicalsofAl

4 ай бұрын

Barrel length

@masone4589

4 ай бұрын

@@ChronicalsofAlI watched a guy shooting 180 ELDM out of a 22” barrel and getting like 2775-2780 fps. 22” should knock off a little but not that much obviously.

@ChronicalsofAl

4 ай бұрын

@@masone4589 I don't know man, as I haven't dealt with any of the PRC 's. The only one that has any appeal for me is the 6.5 . I am concerned about the fact that you have a company that has developed the cartridge, who can squash it's competitors (6.8 western), who makes the ammo, who makes (and pretty much controls) reloading equipment and has as many govt. connections as Hornady

@gabenelson8508

24 күн бұрын

The federal ammo does produce very near 3k. You can also load your own and reach 3k.

What is the difference between ELD-m and V Match ammo, maybe you can deep dive into the different match grade ammo you sell. Also curious what is the difference between say, Hornady match brass, Lapua, Petersen and Alpha brass. How does Hornady brass compare to those other brands of brass.

Hornady, do you have the proper powder back in the 7 PRC?

Another excellent podcast, thanks fellas. 🇳🇿🇳🇿🇳🇿

@scottevans9155

4 ай бұрын

Would love to see a 25 prc

@hornady

4 ай бұрын

Thanks for listening

Why have yall continued to keep the .532” measurement at the Webb/.200” of the case? This has cause clickers since the 6.5 PRC and had cause many to get modified reamers with the Webb being .535”.

It’d be cool if they came out with a 338 PRS or something cause I love the 33 nosler and even love the 338 federal on the low end

Great video!

@hornady

3 ай бұрын

Glad you enjoyed it

Maybe its time for some bookends for the lineup. Id like to see a .50 PRC and a .22 PRFC ( precision rim-fire cartridge) 😂

7 PRC that will run in a Short Action AICS mag.

What about any thing with a 277 prc cartridge

My vote for the next PRC would be .338. Please!!!!! And I wont ask for anything for Christmas for the next decade…

Have a 7 prc, it is definately the sweet spot. Do it all, everyday, all day long. Love it

@hornady

4 ай бұрын

Nice!!

I love the 6.5 PRC but struggle with the crap Hornady brass primer pockets. I have taken a break from it for awhile. Load development trying to get good velocity was killing brass in 2nd loading. If i loaded for brass life i was basically shooting my Creedmoor. Also the Hornady 140 OTM is a more accurate bullet than the eldx or m imho.

@MrHuntermikey

3 ай бұрын

Try Lapua if it’s available . I’m on my fourth 6.5 PRC loading running H 1000 Fed 210 primer

Thors hammer is the 270 win with a long throat will heavy bullets. That one is already taken boys.

Is the PRC’s going to be like the 6ARC as far as good luck finding it from what I’ve read multiple times? lol

A new PRC in the new army caliber would seem like a good idea, but I think the 338 market deserves love to.

@aaronpudlicki7418

4 ай бұрын

It already exists, 338 Norma

@alexmills1329

4 ай бұрын

@@aaronpudlicki7418 true, for some reason I forgotten about that new machine gun round lol

I love my 6.8 spc. The 120 sst absolutely SMACKs under 300 yards. However, it’d be awesome to get more distance with the same bullet diameter. The reason the Grendel and 6arc perform better at distance is that they have the long, high bc bullets. The spc came out right before that took off. So my challenge is this: a high bc 6.8 sst packed into a creedmoor case, as an option for ar10 platform as well as bolt guns. It would essentially be a 6.5 cm necked up to 6.8 but would probably punch harder for any naysayers to the 6.5 effectiveness on deer. The 6.8 western missed the mark by having a larger case diameter, so it isn’t applicable to the ar platform.

@phillipbrandenburg2105

2 ай бұрын

277 furry

I think Judd and I have the same issue. See if you can get a 7 mm with the recoil and ballistic similar to a 280 Ackley improved. Maybe use the 65 PRC case

@Royisme

4 ай бұрын

This is what I want, followed by something that can fit between the 338 win and 338 lapua with a 300 grain bullet.

@ronlowney4700

4 ай бұрын

🤔 It is worth considering! 😎

@ronlowney4700

4 ай бұрын

🤔 Maybe, Horneday Can Eventually Support the 7mm PRCW for Target Shooting and the 7mm prc for Hunting? 🤷‍♂️

@z987k

4 ай бұрын

Why not just go buy a 280ai? Or get a barrel spun up?

@ronlowney4700

4 ай бұрын

🤠 That is the Next Cartridge on My Purchase List, Actually! 🥳

25 PRC with an C.O.A.L of 2.800. So it will fit in a short action. With a 120 grain ELD X.

I know 300 prc is 300 win mag but modernized. Now modernize 50 bmg

338 prc would be a great dangerous game/guide gun cartridge

I absolutely love my 6mm PRC and I would love it if Hornady adopted it and started making some factory ammo for it. In my experience, it can do everything that a 6.5 PRC can do within about 1000 yards (at my high mountain altitude anyway) but has much less recoil which allows for better follow ups and shoots extremely flat which helps with any ranging errors. I've taken coyote and elk with it, nothing has required more than 1 shot with a 110 grain Hornady Atip traveling at 3340 fps or a Cutting Edge MTH 88gr at 3630.

@lanejohnson7656

2 ай бұрын

You would love if Hornady adopted the 6 PRC? Who do you think developed it?? Lol

@zachperrego2362

2 ай бұрын

@lanejohnson7656 They designed the case yea, but 6mmPRC is still a wildcat and I'd love to see factory ammo for it

@lanejohnson7656

2 ай бұрын

@@zachperrego2362 Even IF they did it would likely be so scarce it would be unattainable.. I don’t know how many comments on 6 ARC I’ve read of people not even being able to get reloading components for a long time. From my understanding not the first time Hornady developed cartridges and the end user got hosed on having an unusable firearm..

@zachperrego2362

2 ай бұрын

@lanejohnson7656 Oh I totally agree, but they asked in the video what cartridge I'd like to see support for so I answered, but I know it's most likely not gonna happen

A lot of folks are voting for a 338 PRC. I'd say you go smaller, not larger. Several have voted for a 25, but that's nearly a 6.5 and we've got that already. My thoughts would be a 22 PRC, but I have no idea how that would compare to the 22 ARC. I picked up a 7 PRC, 22" barrel, and can't wait to get to the range. What suppressor should I get for it? My priorities are light weight and compact size. And, I'd hope to have dB of less than 140 for the shooter.

I'd like to see a 33 prc.

Just select ALL of them, like I did!😁 but if only 1, its the 7PRC all day!

Id love to see another short action, preferably a 7. However a 338 in a short action could also be very interesting.

@z987k

4 ай бұрын

So another 338rcm?

@FightingTexasAggie

4 ай бұрын

@z987k I'd never heard of 338rcm, so I appreciate the info. I think hornady making a similar cartridge designed around high BC bullets would be an awesome do all hunting rifle.

@z987k

4 ай бұрын

That's more or less impossible in a 338 caliber. High BC 338 bullets start up at 275-300gr. In order to push those, you need a long action or more. Even a 33 nosler doesn't really have the capacity to shoot high bc 338s. You need to step up to the 100gr+ case capacity to shoot those. So... 338lapua, 338 norma. The 338rcm was a ballistic twin to the 338-06. You can still find rifles chambered in both, but 338rcm brass more or less doesn't exist and factory ammo is long gone. It's pretty easy to make 338-06 brass. But high BC bullets it cannot push.

When you're going over numbers on the paper, a number you should include are hit probability statistics with each. Would probably be more useful than the retained velocity at 800yards where 1% of hunters are capable of shooting an animal at that range.

most dont use a ten pound rifle when hunting that is heavy so more recoil for most. a decent length with a can yes. half mile is 880 yards not 800. as for tge 300 PRC who needs it or wants the recoil? very very few for most the 6.5 is plenty who gets an elk tag? or needs something for bears or moose/bison? few need more than the 6.5 with that CX bullet. if you have a 7 rem mag maybe tune that. for many a 6.5 with a smaller calibre for varmints and similar will cover most things they do and need. the 6 creed or an old 243 with classic stock or a 222 even.

@jeffwilliams3436

4 ай бұрын

Recoil for 300 PRC isn’t that bad. But with a brake it knocks it down to 6.5 creedmoor levels. If my 120 pound wife can get sub 3/4” groups with it with no brake…a grown ass man should be able to do the same.

Yeah Im on the same page with recoil. Between the 6.5 and the 7 would be My druthers. Probably the 6.5. Being that I'm getting older.

Why not the Berger 156 eol as number 1 for the 6.5??

You guys pick some great topics. I'm stuck between 7 and 3. 🤔

@WillRownd

4 ай бұрын

7

@seetownwv

4 ай бұрын

both

Would love a .277 prc. I've been a huge .270 fan for years.

@aaronpudlicki7418

4 ай бұрын

It’s literally a 6.8 western

@jeffkocsis8250

4 ай бұрын

@aaronpudlicki7418 Yes it is and that's why they will never do it.

I’ve been looking long and hard at a 300 PRC to replace my 338 Lapua, it’s just hard to source a turn key rifle as I am left handed.

@RebaDerChi

4 ай бұрын

Same problem here. It’s either Savage 110 Elite Precision or AI AXMC for 10k 😂

@TheIamfrustrated

4 ай бұрын

@@RebaDerChi or a custom build but then I’d imagine you’re into it for the cost of the AI anyways.

the best catrige ever made for everything is the 8x57

No one is talking about the best barrel length for 7PRC to get the peak FPS. I am thinking 28" barrel with a 1:7 twist. I cannot find any info online. 180 and 190 Bergers to hit steel at 1km

@creaturafauna

3 ай бұрын

I’ve seen 24” as optimum barrel length for 7prc. I have seen it in multiple articles on web.

I think a 25 PRC would be a hit.

@michaelbogaski83

4 ай бұрын

I want a 25-06 but im waiting hoping they make a 25 prc that shoots the heavier 25 caliber bullets

Has anyone looked at doing the 300prc necked down to 7mmprc?

I took a mighty fine elk with the 7mm prc at exactly 507 yards ran ten yards and fell

Would definitely love to see a .277 PRC, I’m currently debating on what to do. Get 7mm PRC and keep my .270 or get a 6.5prc but get rid of my .270.

@z987k

4 ай бұрын

The 6.5prc and 270win are ballistic twins. If your 270 can't shoot the heavies, maybe look at one of the new browning or winchester fast twist 270wins.

@ralphyoung9296

29 күн бұрын

​@z987k .. we all know that Hornady is the bully of the bullet industry.. if they didn't invent the 6.8 western, they said they will not support the caliber.. you know what this means. If you don't buy our PRC's we will take our ball and go home... if you don't play by our rules and do what we say, we'll extort you. Now take that bloody nose home.

🤔 Personally, I Have No Desire To Hunt With The 300 prc, Because Anything Other Than Big Alaskan Bears Can Be Taken With the 7mm prc! The 6.5 prc is a Fine Deer and Antelope Cartridge, But For Anything Bigger, Their Are Better Choices! The Sweet Spot For Me is the 270 and 284 Calibers! 🥇 Seth is Right on the Money! 🤑

I love my 6.5 and 7 PRC’s but man, the 7 has been just a little disappointing when it comes to performance. Accurate as can be but with a 22” barreled rifle it’s a bit weak. I’m getting almost 200fps less than advertised out of the Outfitter 160gr CX loads (yes I know they were tested/advertised with a 24” barrel)

@RepublicofTX

3 ай бұрын

Wait, you mean to tell me you’re getting less fps out of a shorter barrel than what they tested the round out of? Who would have thought?

@chevyon37s

3 ай бұрын

@@RepublicofTX Thanks captain Obvious. The point I’m making is that’s a lot of velocity difference for 2” less of barrel and is much greater than the 25-50fps loss per inch of barrel than is commonly seen as your barrel gets shorter. So is the muzzle velocity listed on the box of Hornady ammo bogus, or is it an issue within the ammo itself like too slow of a powder selection to work with the shorter 22” barrels that are becoming more popular on hunting rifles as more and more people hunt with suppressors?

Mind blowing how many of yall are pleading for cartridges that already exist.

I'm waiting for 7PRC options in my country (come on Howa!!). Still not available. 300PRC is awesome if you really wanna hit hard at long range like for hunting, but if you're just gonna ring steel and hunt at ethical ranges, the 7 PRC makes more sense to me.

Would love to see you come out with a tipped bonded bullet

Any tips on reduced recoil loads or ammo for the 7mm PRC? Years ago, Hodgdon published a lot of specific reduced-recoil loads (including for the similar 7mm Rem Mag), but no longer has them on their website. I would prefer one good rifle with good scope (instead of two lesser rifles with cheaper scopes) but would only rarely need the full power and range of the cartridge. Most of the hunting round me is 200 yards and under. Back injuries make recoil painful these days (and I am a little guy to begin with), so I am looking for a solution that makes both my back and my wallet happy. FWIW, the dual-purpose nature of the 277 Fury would appeal to me if it were more common and less expensive. The lower pressure brass-cased rounds would work most of the time with the occasional hybrid-cased load for bigger game and or longer distance. The 7 PRC makes more sense in the real world, though. Thanks

@jaydunbar7538

4 ай бұрын

Get a good rifle that fits you well with a break on it and recoil won’t be an issue, personally I’m a big fan of my Weatherby vanguard in 7 rem mag. Has the factory matched radial break, could shoot it all day without any discomfort. Just swapping my out recoil pads can make an astonishing difference in felt recoil, I’m impartial to limbsaver pads but there are plenty of good ones to try. A stock that fits you, a muzzle break, and a good recoil pad makes a 7 rem Mag into something anyone can shoot. As far as reduced recoil loads both Hornady and Remington offer factory loading with managed/reduced recoil last I knew. Federal used to offer some but I heard they stopped. Not saying this as a replacement for hand loads, just that a box or two to see how they do it may be a good place to start towards developing your own load.

@scottcraig5164

4 ай бұрын

A brake will help a ton, you could also go with a 7 - 6.5 PRC. But if I were you I would just go with the 6.5 PRC to make life simple. especially if you are looking at 200 yds or under. I have a 6.5 and I think it will do everything I want it to do but I am still compiling parts to build a 7 PRC just because...

@jfess1911

4 ай бұрын

@@scottcraig5164 I just have a fondness for 7mm. The question is more out of curiosity than anything else. A decade or so ago, Hodgdon had published low recoil hunting loads for many cartridges, including magnums. mostly using H4895. Currently the detailed loads are gone and the instruction is to use H4895 with this qualification: "This works only where H4895 is listed. DO NOT use in a cartridge where H4895 is not shown." H4895 is not shown for the PRC's (although, interestingly, loads for Accurate 5744, another powder used in reduced recoil are listed for 6.5 PRC and 300 PRC). edited to add: found a copy of the old H4895 load data on the Terminal Ballistics Research website by searching for "hodgdon h4895 reduced loads".

@scottcraig5164

4 ай бұрын

@@jfess1911 Then I would go with the 7 - 6.5 PRC, you get your 7mm in the 6.5 PRC cartridge so less recoil and keep powder filled to higher % of case capacity. 5744 seems pretty fast powder for the 300 or the 6.5 PRC for that matter.

@jfess1911

4 ай бұрын

@@scottcraig5164 5744 is one of those powders that ignites well in low volumes and is used for reduced-recoil loads.. Accurate (now owned by Hodgdon) says that the its low-recoil formula is to start at 40% case volume (measured to base of bullet). For example, the 6.5 PRC load listed for the 147 ELD-M starts at 30.2 grains of Accurate 5744 and only produces 2386 fps, which is considerably slower than factory 6.5 Creedmoor loads with this bullet. For example most full power loads for this bullet with the 6.5 PRC use closer to 60 grains of propellant and produce velocities roughly 500 fps faster.

My Bergara premier approach 6.5 prc is shooting factory federal terminal ascent 130 grain at 3,100 fps. The crazy thing is, and I have seen this on all kinds of prc videos, 270 guys just can't accept that if a 270 is throwing a 130 at the same speed, the 6.5 prc is still more potent. At least a tie. But they are dead set that .264 isn't enough even though it's getting .264 mag ballistics.

Interested in a 7 prc but really want an update on 8.6 blk

Cool hat on Judd

300= one ton truck, 7=3/4 ton truck, and the 6.5= a 1/2 ton truck.

@nt3523

3 ай бұрын

From china. The velocities suck.

I would use a 6.5 CM with 143 eldx within 150 yard with needing (must have) behind the shoulder broadside placement. But this is no where near my 1st choice. I like copper and fast now. I want north of 2300 fps at impact.

Message not clear Seth. Do you like the 7 PRC? 😅

😏 I Love Your CX Bullets, But I Have To Use Up All My GMX Bullets First! 🤪 And, That May Take A While! 🤣