EP. 11 My BMW E30 Restoration - Rear Trailing Arms - Complete Restoration & Reinforcements
Автокөліктер мен көлік құралдары
Hi and welcome to my channel.
In this video I will be showing you every step of my rear trailing arm restoration.
I chose to add the reinforcement kit due to the incresed power of my engine swap and increased rigidity of my suspension components.
If you have any questions regarding this video, pleasse do not hesitate to ask below!
Time Codes:
0:00 - Intro
1:15 - Disassembly
4:04 - Reinforcment kit
6:46 - Prepping and painting
8:30 - Reassembly
14:14 - Outro
Parts/service list:
Wheel bearings - Meyle 300 334 1102/S
Handbrake shoes - Febi Bilstein 04445
Handbrake cables - Bosch 1 967 477 065
Reinforcement kit - BORN2DRIFT
Handbrake shoe spring kit - www.ebay.co.uk/itm/331063823499
Brake shield - 34211162061 & 34211162062
Polybush kit - Poweflex PFXPFR5-306
Пікірлер: 39
Awesome job dude, glad you modded the rear arm mod now, rather than finding out the hard way later. 😅 Looks like it should fit just fine the way you've done it, similar to what I ended up with. 👍
@BadE30
Жыл бұрын
Thanks man! It is a shame this issue was not stated when purchasing, but I was lucky to find out before it was all ready to go!
Great work, as always!
@BadE30
Жыл бұрын
Thanks my man!
This is awesome!
@BadE30
Жыл бұрын
Thanks😎
Your explanation and general knowledge is awesome , you’ve become so what of a hero of mine …. I pray to meet you one day ❤
@BadE30
11 ай бұрын
You know what they say, never meet your heros💔 but please keep watching my videos as I want the ad revenue
@kieranpaulson8691
11 ай бұрын
@@BadE30 ad block , great work tho
Great work bro👌🏼, I’m gonna do this soon
@BadE30
11 ай бұрын
Go for it!
Lovely old job mate, reminds me of spannerrash’s resto! Top job
@BadE30
Жыл бұрын
He’s a great guy! Cool to see others also keeping e30’s going
Nice job again, would recommend using compressed air after welding to help distortion, 😎👍🏻
@BadE30
Жыл бұрын
I have always been told to be wary of speeding up the cooling process when welding, it can develop martensite but you are potentially cooling fast enough to de-temper the steel and cause porosity or cracks. Luckily these were just small welds so no extreme distortion took place!
You love that Por 15 😂! Great resto man! Keep em coming
@BadE30
Жыл бұрын
I’m running out of parts to use it on! Haha. Thanks 😎
@dhilankerai3585
Жыл бұрын
@@BadE30 what are your plans for the e30, OEM+? Surprised you didn’t go for a 5 lug conversion and a BBK
@BadE30
Жыл бұрын
OEM+ yeh, I want 15” wheels with big tyres, and 5 lug wheels are not as popular in the smaller sizes! Also got the big brake kit on the front, just kept the same at the rear as my goal isn’t tracking it etc
Niceee!
@BadE30
Жыл бұрын
Thanks!
👍👍👍
BMW✈✈
Have you had any issues with bushings squeaking?
Did you make the reinforcement kit yourself or did you buy it ready from a supplier?
Can you link the sleeve kit for bushing removal?
@BadE30
5 ай бұрын
www.ebay.co.uk/itm/265214345379?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=UB597qhlS2-&sssrc=4429486&ssuid=ACytoiAGSdC&var=&widget_ver=artemis&media=COPY This is the one!
Super clean please do mine for me😢
@BadE30
10 ай бұрын
Wish I had time for others! Maybe in the future 🤔
Quick question, after sandblasting, the metal prep stage that you use, is that enough to allow the POR to adhere to the metal? I've been all over the internet and I can't seem to get a solid answer.
@BadE30
Жыл бұрын
Hi. I have had a lot of experience with the paint and doing what exactly that, i have an no issues. In fact I have found it to be very versatile, the sandblasting creates a well etched surface, and the metal prep helps this as well!
@richardknowles1548
Жыл бұрын
Did you wash it after etch or straight to paint?
@BadE30
Жыл бұрын
@@richardknowles1548 I washed it off, that’s why you can see a bit of flash rusting. I would recommend drying it as fast as possible once washed, either using a heat gun or compressed air
How many coats of por 15 did you apply?
@BadE30
Жыл бұрын
One coat is sufficient for the smooth surfaces. But on the cast surfaces, it usually takes two as the first coat sits into the shallow parts of the cast revealing the peaks
link for the press kit? @Bade30
@BadE30
Жыл бұрын
www.ebay.co.uk/itm/204175482418?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=-gfqthrrqbo&sssrc=4429486&ssuid=ACytoiAGSdC&var=&widget_ver=artemis&media=COPY This is the same as i used, has really come in handy
very poor design of the strengthening kit by born to drift. you should not have to modify it especially as the modification you.ve done is going to weaken the strengthening. i found out the hard way when i put it all back together and it started to rub the fuel pipe
@BadE30
Жыл бұрын
It should for sure state this issue, I presume it is for e30's with a modified fuel tank. Shame it wasn't mentioned to me until I purchased the kit, I am happy the structural integrity of the modified side is adequate, still a pain!