I warrantied a M18 One-Key Impact about 2 months away from 5 years (trigger issue).. mailed it off, back in 6 days with a $176 repair that was covered..very impressive service. I think you’re good my friend. No cost, even shipping. Nothing but heavy duty.

@MORGANSMaintenance

4 ай бұрын

We will see.. I figured I’d try. If they had a new Gen I wouldn’t have messed with warranty probably, but I’d like to keep that one going till they come out with a new one.

Very interesting loadouts. Thanks for sharing. Billy looks to be a commercial maintenance loadout to me, not specific to any trade. Rocky looks to have telecommunications/electrical loadout with some pretty serious tools. Rinati looks to be commercial electrical installation.

@MORGANSMaintenance

4 ай бұрын

All good guesses in my opinion.. we will see what they say 👍

First bag is a handy man / general contractor with bomb disposal robot repair side gig Second bag industrial electrical / telecom / network maintenance Third bag commercial / industrial electrician doing mostly conduit installs / wire pull work

@ElectroAtletico

4 ай бұрын

Commercial wireman without insulated screwdrivers and a low-voltage Fluke tester????

@robholland5925

4 ай бұрын

@@ElectroAtletico well not everything is live in new build fase. I’m thinking new built installation pre going live.

@MORGANSMaintenance

4 ай бұрын

I agree on #3, we will see what the other two answer before I give it away.. but good guesses

@rinati75

4 ай бұрын

@@ElectroAtletico WRONG!

Hello I'm Billy Molina from Texas currently I'm a maintenance tech for a plant nursery but have done freelance maintenance work for a few local HOAs. Depending on my current task my load out can shift and change with my demands because of the modularity of the tech clip system and pack out cleets I plan to install on the bottom of the bag most of my tool choices have been influenced from your channel and many others channels such as funk fpv, essential craftsman, last best tool, Adam Savage tested, sparky channel, Millis construction, project farm and many many more love this community!!!

@MORGANSMaintenance

4 ай бұрын

👍👍.. good load out, appreciate you sharing it

I'm using a pouch that's Japanese and is belt only so I may steal that idea to hang a pouch like that on the front or side of a bag. If you haven't yet might be worth a try with theses chain connect pouches from knicks sk11 prostar. There's something about when it's articulated like that they lay down when you kneel and comform front and back when you get into your vehicle. I don't even have to take mine off to get into my driver's seat which is nice.

@MORGANSMaintenance

4 ай бұрын

Yeah how pouches move with you is really important 👍👍

1. Locksmith 2. Sparky/Internet/TV. Parkside is a brand of power tools owned by German Lidl discount retailer. Some of their tool are rebranded/licensed older Bosch tools. Yato is a brand owned by a Polish Toya company; mostly very cheap and rather low quality tools made in China and imported to Europe; sometimes I buy their tools as one-use, like a corded wood-plane for removing old oil paint; IMHO not worth buying. 3. New build sparky. I like how clean all the tools are.

@MORGANSMaintenance

4 ай бұрын

I think you are close on 2 and 3… one is a little bit of a hard guess, no one will get it exact I think. Appreciate the info on the tools my friend 👍

@p01am3a

4 ай бұрын

Yato is an excellent cheap alternative for sockets ans spanners, similar in quality with Sata, these will last a long time, so for me there's no point in buying a premium brand (they do have some crap products thought, so their reputation is not the best); Parkside are mostly crap cheap diy tools sold in Lidl stores, yet for a basic laser ruler (indoor use) and a thermometer that I've got as an impulse buy, I had no issues with them in the past 5 or so years 🙂

@Stefan_Kawalec

4 ай бұрын

@@p01am3a Fair point.

A little late to the game this week. Some tougher ones. 1. General maintenance or handyman. 2. I want to say industrial maintenance but there were a few things like the coax mapper that threw a wrench in that guess. 3. Also stuck between industrial maintenance or commercial electrician. Leaning maintenance.

@MORGANSMaintenance

4 ай бұрын

#3 is a industrial/commercial electrician, he is the only to answer in the comments so far Still waiting on #1 and #2 but you are good guesses on the them. They told me in their emails, but I will wait and see if they answer

One maybe a GC or residential electrician. Two looks like a sparky that does some low voltage stuff. Three looks like a sparky. Guessing new work probably commercial mostly

@MORGANSMaintenance

4 ай бұрын

Good guesses in my opinion… we will see what they say 👍

The weird metal pen in loadout one is a precision oiler he also had a wd40 pen as well.

@robholland5925

4 ай бұрын

Thanks I had no idea what those were mmm the plot thickens

@MORGANSMaintenance

4 ай бұрын

👍👍

That's a mess if low volt stuff the bane of my existence in electrical.... so many sockets there must be some real industrial theme going on here 👍

@MORGANSMaintenance

4 ай бұрын

It is a lot of sockets

The Knipex ergo strip works great in the US, i work as a marine electrician so i deal with RF of all sizes, data, and stranded wire from 26awg to 4/0. This tool is great for getting the jacket of data cable cleanly. I also love the splitter blade on the side for opening duplex cable

@MORGANSMaintenance

4 ай бұрын

👍👍… appreciate the feedback, I’ve been curious about it.

cases label tranlations: scule - tools (as a general term) accesorii - accessories consumabile - consumables diverse - various fiare - iron (a more specific translation - several things made of iron); take it as a box with tools for heavy duty and high torque test eq - specialized test equipment the large tstack unlabeled - protection gear ryoby - long term light and mini air blower impact - dewalt impact + accesories ciocanitoare - (means woodpecker 😀 ) dewalt hammer drill + accesories red case - full set of 1/2 impact sockets NOTE - the tools picture with the angled scissors goes with the backpack!

@ElectroAtletico

4 ай бұрын

Romanian (Scule gave it away).

@MORGANSMaintenance

4 ай бұрын

appreciate the responses 👍

Done a total of 3 warranty claims with Milwaukee, never had an issue was either sent a brand new tool in a box or a brand new looking tool. I assume they sent me the first one they reconditioned.

@MORGANSMaintenance

4 ай бұрын

I hope I get the same treatment 👍 I really don’t want to buy another Surge, my hope is that one holds out till they bring out a newer version.

@Russell8021

4 ай бұрын

@@MORGANSMaintenance I’m sure you will I’m in Southern California and turn around time is usually 7-14 days. That’s from shipping the old tool off to the new one at your doorstep.

@MORGANSMaintenance

4 ай бұрын

@@Russell8021 👍

Ive thought about the knipex ergostrip but it skips 1.0mm which from the charts ive looked at its the same as 18awg. Whiich is thermostat wire. If it will do stat wire, I'd give it a try.

@MORGANSMaintenance

4 ай бұрын

I hadn’t bought it yet because I figure it won’t do our wire well… I don’t know anyone here who has one to ask.

I'm guessing all three are in facility maintenance? Especially Rinati just because he has his tools marked, and we all know when working with others that's how we keep track of our beloved tools. Also, the 1/4 deep socket and matching regular socket set from Billy Molina loadout, that same set I bought at Walmart... I tell you what Walmart has decent tools too.

@MORGANSMaintenance

4 ай бұрын

We will see what they all say… I try to stay away from Walmart as much as possible.. not because of their tools 😂

Love watching these. How do you go about sending a photo in?

@MORGANSMaintenance

4 ай бұрын

You can email them to me. My email and info is in the description. You can just email your pictures and make sure and include your KZread handle in the email

#1. General handyman. In chat, Dr. Morgan (Joey Morgan, PhD means a doctor, right?) said I was pretty warm; I'll stand. #2. Audio / Visual / Studio technician. The wiring he works on is sensitive enough to need all that test equipment; duplication may be to provide tools for a helper / apprentice, and amidst the various cabling tools, I didn't see a punchdown tool, so I don't think it's data. His work includes running / testing power for the equipment as well. Wild-card guess: intercom installer. #3. First point is the Bic 4-color pen: I call those "Mom-pens" because Mom always used those; she was a teacher. I've often carried one myself, or the version that has three ink colors plus a .5mm mechanical pencil. I think he's a new-construction Sparky, but probably not high voltage

@MORGANSMaintenance

4 ай бұрын

Good guesses… we will see what they say 👍👍

@MORGANSMaintenance

4 ай бұрын

The pHD is “pretty handy dude”. I got it because where I worked everyone else had a “title” so I gave myself one. I had that on my door

@OnusBones

4 ай бұрын

@@MORGANSMaintenance Oh, I read the sign; I think it is appropriate, so you get to be Dr. Morgan!

@p01am3a

4 ай бұрын

try to imagine if certain tools are really missing or are present in the stacked cases ;)

Your poor surge I've had mine since 19 and it's going on 5 years so far do good. On small items I haven't had good luck with warranty way too much effort and hoops dosent mean 160 dollar surge might be worth it. I've had to warranty knipex before and that has gone ok... if I have to spend 20 to 30 bucks to send something back it's really a cost benefit ratio in time. Ideally if it broke today I'd get a new one on sale but Iike you I'd be sad with a 3rd gen to come out. But if I waited like thoes poor saps waiting for milwaukee track saw I would grow old before it came out.

@MORGANSMaintenance

4 ай бұрын

I will replace it if they don’t fix it… just so I make them come out with a new one. They won’t do it till I buy another old one 😂

I was thinking something HVAC related, but the M67 fragmentation grenade threw me off. I don't know--unless he works on Lennox.

@MORGANSMaintenance

Ай бұрын

Which one was you thinking that about?

@AlbertFrederickLarun

27 күн бұрын

@@MORGANSMaintenance I think I was watching Loadout 1 when I made that comment. The part about carrying a hand grenade (M67) was a joke about Lennox (the HVAC company). I don't care for their newer equipment very much--it seems to break a lot. It makes me want to use a frag grenade on a Lennox furnace--might improve the performance. Billy doesn't actually have an M67 in his loadout. Great channel, Morgan! You provide a lot of excellent ideas and tips! Thank you! Your shop area looks immaculate--well organized!!

@MORGANSMaintenance

27 күн бұрын

@@AlbertFrederickLarun I got you… I don’t run into Lennox much here where I am. A lot of Goodman and Bryant.. some Trane. it is in my videos… it sometimes isn’t as immaculate in between 😂😂

Any chance you can put a picture of the load out with the answers? Hard to remember back, for me anyway 🤣

@MORGANSMaintenance

4 ай бұрын

Whose loadout are you talking about?

@nathanokeefe1390

4 ай бұрын

@@MORGANSMaintenance I am referring to all of the episodes. For example when you show the answers from last episode, include a picture from the previous episode for reference. I guess I could binge watch and watch 1 after another 😉

@MORGANSMaintenance

4 ай бұрын

@@nathanokeefe1390 gotcha.. My editing program I use only allows me to have one “extra” picture at a time. The comment is that picture, but I will see what I can do 👍

Do you remember where you picked up that little whisk broom?

@MORGANSMaintenance

4 ай бұрын

I got it off Amazon amzn.to/3xkbIiq

@rulrich45

4 ай бұрын

@@MORGANSMaintenance Perfect.

the wiha and wera insulated bits are not compatible between each other, also the wiha bits are not compatible with 1/4 bit handles; the nice thing is both sets compliment each other for reach in narrow places, wera bits are ~10cm and wiha ~5cm

@MORGANSMaintenance

4 ай бұрын

I didn’t figure they would be.. thanks

First one is handyman, second one is rocket technician, third one is nuclear power plant tech. 😁

@MORGANSMaintenance

4 ай бұрын

As good of guesses as any 😂👍

The language in #2 is Romanian

@MORGANSMaintenance

4 ай бұрын

👍👍 appreciate it

(1) Maintenance man. (2) Network-Telcom Installation (in Romania). (3) Maintenance man - (never heard of a wireman without at least a pair of insulated screwdrivers and carrying a basic, entry-level, Fluke voltage tester).

@MORGANSMaintenance

4 ай бұрын

I think you are real close on the first two.. close enough without getting it exact anyways. I didn’t know #3… so we will see

@rinati75

4 ай бұрын

Just because I don't have the insulated screwdrivers or my fancy meter in my everyday loadout doesn't mean I don't own them. Jumping to conclusions isn't good for your health brother. Take a deep breath and chill.

@ElectroAtletico

4 ай бұрын

Vato, tu tranquilo que se te nota que te calientas muy rapido y tienes que aprender a calmarte o no duraras mucho en este mundo.@@rinati75

Hello Joey. I meant to let you know that my bag weighs 36 pounds.

@MORGANSMaintenance

4 ай бұрын

👍👍… I’d just comment it below the video when it goes live

@robholland5925

4 ай бұрын

I’m amazed on the amount of tools that fit in that tech mct Liking the idea of that bag more and more

@rinati75

4 ай бұрын

@@robholland5925It's been the best tool bag I've used. I highly recommend it. Veto has a spring promo right now; if you buy this bag, you can get a second (tier 2) bag for free.

@MORGANSMaintenance

4 ай бұрын

@@robholland5925 it’s a really good bag

@MORGANSMaintenance

4 ай бұрын

I just realized you did comment on the video 😂… I thought it was the post about the time change