Engine Rebuild is HERE! | Golf MK1 Build
Today we have a lengthy but interesting video on the rebuild of the engine. It has taken some time to get to this point but we are finally here. Shale will give you an in-depth look of the working of the engine.
Great tips and a good insight on the inner workings of the engine, you may just discover something you didn't know as we work through the night trying to get the engine ready.
We hope you enjoy, consider subscribing, giving us a like and maybe follow us on Instagram as well.
Check out our "In the Life" videos if you haven't seen:
• In the Life
Video by:
/ @goldenoptics6281
Our Instagram:
/ crispy_worx
Music Featured:
The High Line - Causmic (KZread Audio Library)
(May go under the name of Mama Muoì Chìn)
Пікірлер: 59
Not a mk1 owner, but stumbled across the page this morning. Well done guys. Subscribed purely because this is what car ownership is about. Appreciating the work that goes into a build. We are just lucky to see the effort on the other side
@crispyworx2360
3 жыл бұрын
Appreciate the support bro🙌🤙
Proudly South African here.. Keep up the great work👍🏼💪🏻
@crispyworx2360
4 жыл бұрын
Thanks alot bud, we will try our best👍
Jeez bru I wish you could've done this job at my house where there is plenty light. I take my hat off to you wotking with a flashlight. In my younger days we also did it this way. You simply do what you can with what you have. Brilliant
Dope video, guys! Very informative! 🙌🏽 Wish I saw this a year or 2 ago lol!
@crispyworx2360
4 жыл бұрын
Thanks a lot man 👊
Like the other guy I too stumbled on this channel today, I enjoy SA content like this. I own a polo 9n 1.4 consider rebuilding the engine myself with all stock internals no fancy stuff.
Can't wait to see the MK1 finished ouens! 💯
@crispyworx2360
4 жыл бұрын
Soon bro👍👍
You could always have undersized bearings which make you believe the crank is turning fine. Best is to always use a mic or plast strips. You never know... Also the engineering companies sometimes make mistakes so it is best to check the lash (forwards and backwards movement of the crank. After you installed the mains. I have seen guys break conrods or suffer heavy oil leaks because of engineering mistakes.
I'm about to rebuild my motor myself right now
Video, vlogs, whatever you wanna call it Me: I like this guy
@crispyworx2360
2 жыл бұрын
😁👍
I enjoyed the video. Just a Lil more detail guys on the manuals. Drop a link as to where we can get the manuals. But further more. Very proud of u guys.
@crispyworx2360
3 жыл бұрын
Glad you did man, we will definitely look into it and we got the manual from amazon.
Nice video but the main specs like the torque measurements where left out
More Sa guys must join the platform 💪 Sa power
Hi, what's the size of the triple square bit or socket you use to torque the head bolts? Thank you!
when using a torque wrench you should only click once, if you click more than one time then it will over torque it just slightly. Other than that great job!
@crispyworx2360
3 жыл бұрын
Thanks buddy, we were just double checking that everything is torqued and that we didn't miss any bolts. But thanks for the feedback and help we appreciate it 🤙
That Brasso hack has me hacked 😂😂
@crispyworx2360
4 жыл бұрын
🤣🤣I'm glad man
Hi guys, what were the torque measurements for the crank and pistons?
Can you make a vedio on what cars you drive on a daily basis But still GREAT VEDIO
@crispyworx2360
4 жыл бұрын
Not a bad idea, we will see if we can do something on that in a future video.
@thefriends109
4 жыл бұрын
@@crispyworx2360 ok
Which spline bit are you using for head screws
Hey guys, awesome work. Can you help me connect a fuse box for my mk1.
Where did you buy the rebuild kit and how much was it i need to rebuild my motor aswell and need some advise and help please
What engine is this ? Is it a AGY Vw engine thank you for sharing I am from South Africa
248 subs, you guys are growing kak fast
@crispyworx2360
4 жыл бұрын
You think so? Thanks so much for the support 🙏
@saint7087
4 жыл бұрын
@@crispyworx2360 ya of course
Can you guys tell me if its possible to rebore a 1.4 block to 1.6 with no issues?
Great Job gents. How much for a Rabbit Golf Build?
Good job bro i have vw mk2 amazing car💪🏻 I want install turbocharged 😁
@crispyworx2360
3 жыл бұрын
Thanks man👍, what's holding you back?
@mohamedal-hojazy4466
3 жыл бұрын
Crispy Worx nothing bro
Heyy dude this is not usually Golf Carb, what is the carburetor name that you used
Champions…. How long does it take you to complete the whole process…?
@bennedictmaine888
3 ай бұрын
And much would charge if incase I want to rebuild the whole engen 🙏🏽🙏🏽
30. 60 and 90nm for VW AF engines.
how much was the rebuild cost?
Single oil feed
Hey guys,do we not set the engine timing when fitting the Cylinder Head. That "1 Fire 4 Rock" procedure?
@crispyworx2360
Жыл бұрын
Yes we do, you exactly right
looking for org vw mk1 parts how can i get help im in zi mbabwe
What that a et engine code
I need help of vw polo playa engine rebuild I am from pretoria
Or a hm engine code
Hello, what engine is it? what engine code is it?
@crispyworx2360
3 жыл бұрын
Its a 1.3 carburetor engine
@carloszuniga5353
3 жыл бұрын
@@crispyworx2360 My Engine en 1.5 (1471 CC) code FC. Year 1975
Like nothing happened exay 😂
Bros your hands are clean?
@crispyworx2360
3 жыл бұрын
🙌😅