Good job Sir

Can u get me 4cx engine how to timing diesel engine of a 4cx and how to move it's diesel pump from engine

hello, I have a question about what you were saying on the injection pump, when you have the marks lined up, is there a mark behind the inspection hatch that must be timed relative to tdc on the engine? thank Robert

@ProjectsbyTMD

7 жыл бұрын

Yes, the camshaft, crank, and injection pump timing marks must be lined up. They are visible on the front side of the engine.

@Rab93

7 жыл бұрын

Have you stripped and rebuild one? I'm asking as I have a friend of a friend who had an old Perkins in his yacht but he has removed the pump and then sent it away to be rebuilt, however he believed the pump was correct and altered the timing of the engine to suite it and now obviously she won't run, he came to me to look into it as I look after my friends trawler, haven't worked on a cav pump myself as my machines are all VE pumps, I'm wondering if the pump could be set 180 degrees out for example

@ProjectsbyTMD

7 жыл бұрын

Yes, there is a mark on the injection pump - inspection hatch - please look at time 2:55 in the video: kzread.info/dash/bejne/jJV6pJhvft3Ldc4.html

hey do you know what turbo this is?I'm looking for a replacement for my jcb 3cx because it's covered in oil especially on the intake side and i get blue smoke which is concerning.Otherwise the engine sounds strong so this might be the issue.

@ProjectsbyTMD

3 жыл бұрын

no idea

i wish i can see from start to finish

What is the torquring pattern and value for putting on the head?

@brad3378

3 жыл бұрын

See page 40 www.endeavourowners.com/dscsn/info/manuals/4236M%20Workshop%20Manual.pdf

Engine timing dekau na baia.aye engine ka

What can be done to use the turbocharger of the perkins t4.236 on this?

@ProjectsbyTMD

3 жыл бұрын

This engine has the turbocharger - I suspect that it must be properly matched with the injector pump.

what is your background man are you a mechanic? very systematic in your approach.

@ProjectsbyTMD

8 жыл бұрын

+Budd Hudd This is a just a hobby ... I should also mention that my I have been working on cars/trucks for many years. Professionally I have worked with engine research firms -

Hi ProjectsbyTMD. Rich here partner Columbus Ohio. I have a perkins parts engine LD for fixing a AR perkins. I was going to use the Camshaft from the LD engine but it's different. The Lobe's are in a different Timing Order. I'm pretty sure most 4 cylinder engines run 1.3.4.2. Except a Old Ford industrial wich I think is 1.4.3.2....? The LD is 3.9 Liter and the AR is 4.2 Liter.. is it the Stroke changing the lobe order ....?? Also one day I may bolt a Turbo onto this AR .Can I use the Natural Asperated Camshaft...? Or do I need a different one because of the forced air from the turbo....? I read the Nonturbo is 18.5.1 Compression and the Turbo engine is 16.5.1 Compression. Think it will damage the engine.....? i'm thinking it should just be more power....? But i'm worried about the difference of Camshaft on a Turbo Engine...Vrs. Nonturbo....Rich...

@ProjectsbyTMD

7 жыл бұрын

Rich - you're asking some tough questions. I would contact your closest Perkins dealer to get the info that you need to answer your questions.

@richs65treebucketservice24

7 жыл бұрын

Cat bought perkins engines...Some feller here in internet calls them Perkapiller....Haha....Thanks....Rich.........:)

For JCB engine

Sr. Good night.! I have a one problem. I don´t now what is the correct part number O/H repair motor for this Serial number: LH50133U030904M can you please help me? My motor is 4 cilinders and have 4 rings for piston, but rencently I buy a kit O/H POK452 perkins but this kit have 3 rings for piston. can you please help me? JCB 1550B

@ProjectsbyTMD

6 жыл бұрын

You'll have to contact Perkins on this one - give them your engine number - they should be able to help.

@edgarlozano5177

6 жыл бұрын

What was the Kit part number O/H you bought to repair that engine?

What year is this

@ProjectsbyTMD

4 жыл бұрын

not sure ... the JCB Backhoe is from the 80's

437 spill timing

favor si sabe que repuestos de motor cummis le da al motor jcb 444ta1 tractonegociosmac@hotmail.es