FINALLY! An engine noise video that actually has a noise in it instead of 10 mins of talking about a noise...

@upc.barcodes83

2 жыл бұрын

Youre talking about that russian mechanic 🤣 i thought the same thing

@roshanthapa25

2 жыл бұрын

Exactly

@rollin3480

2 жыл бұрын

On God tho🤣🤣🤣❤️

@Roberto_Bonilla

2 жыл бұрын

Mi brother perdiste el tiempo, lo más importante como pudiste el cigüeña no lo mostraste, esperaba ver la tecnología rusa en accion.

@geraldwallsjr8380

2 жыл бұрын

Amen tid aved me from buy an Chevy ss with the dsme issues

I can't give this video enough likes... perfect amount of helpful info, from actually running the car with the knock, to showing how the rod bearings were wore out. Thank you

@DIY_PROFESSIONAL

Жыл бұрын

Happy to help. 😊

1 of the most useful videos on KZread This happened on my Opel Astra F c16se, 1st there was that engine knocking sound then I opened the top cover & noticed there was no oil reaching the hydraulic lifters then changed the 1 camshaft 2 oil 3 oil filter 4 head gasket It continued & was clueless untill I bumped into this video For sure my no1 piston was shacking and had no even a piece of bearing left. Will update soon, hope the parts I need now will get them by Tuesday. Thanks a ton man.

@DIY_PROFESSIONAL

2 жыл бұрын

Thanks for the detailed comments...Happy to be useful. 🙂

Probably the best rod knock videos out there. Nice job 👍🏼

@DIY_PROFESSIONAL

Жыл бұрын

Thanks

Some video s they just talk, some don t talk. I actually learned something from this 👍

@DIY_PROFESSIONAL

Жыл бұрын

I am glad that this helps!😊

Love how u ddnt take the whole engine apart to do a simple fix im gonna check my rides now i have 2 vehicles with the same knock? THANK U SO MUCH FOR THE MECHANIC VIDEO!!!👍😀

screw the haters the video helps a lot

@DIY_PROFESSIONAL

2 жыл бұрын

Thanks

This is a great video! My 2003 Dodge Caravan 3.3 L engine, makes the exact same noise. I am mechanically inclined to do the job. Thank you! You make it look easy.

@DIY_PROFESSIONAL

3 жыл бұрын

Thanks for watching. Happy to help.

Nice diagnosis, love this content 💯

Great VIDEO & Content guys ! You really helped me with the issue I’m having…. Keep up the great work !!! Peace

good job. do you beleive crankshaft or connectinmg rod bearings sounds can be up /down just sometimes not in all revelotions?

Had this happen to my 94 Chevy Z71. 350 engine. It started when I pulled our 5th wheel to Blyth for Dove season. I lived in Hesperia, 170 miles away. The knock got real bad going up Cajon Pass, on the way home. I pulled the oil pan the next day, pulled off the #1 rod cap. The bearing was trashed, but the crank was fine. I replaced all the rod bearings with no further issues. The truck is still on the road today with over 431,000 miles on it, with the same bearings I put in it, purchased from NAPA auto parts.

@DIY_PROFESSIONAL

Жыл бұрын

Happy to hear that this procedure worked.

@davidellis279

Жыл бұрын

Your a very lucky person to get away with just replacing the rod bearings especially after such a high mileage,I think at the very least I would have replaced the main bearings as well just to improve oil pressure,it’s not often you can get away with what you did at least not for long,you have more faith than me doing this.

Great job y'all. Thank you.

Man that this the most terrifying noise I have ever heard in my life. Breaks my heart and wallet

@smoothie1646

Жыл бұрын

😂😂

been wondering what was the piston arm... are you talking about the connecting rod?

thank you for the upload fellers. I appreciate you

Great video even though the end result wasn’t successful. Always wondered if this would work on a knocking engine

Thanks for your video. Though I’m just a girl interested in understanding how to diagnose the engine noises , your simple explanation and faithful demonstration make me thoroughly understand car engine🥰😚🙂 sorry for your car , thanks for your kindness 😇😇😍😍😍

Thank you for being honest

Fantastic video..best I have seen so far my my engine noise

@giftwhite9443

Жыл бұрын

I managed to fix my engine with the help of this video.

@DIY_PROFESSIONAL

Жыл бұрын

Happy to help!

@kingmandume203

Жыл бұрын

@@DIY_PROFESSIONAL if you can do an online shop for spare parts...I think that would be great

Amazing, thank you so much. Please more videos

16 Elantra Gt manual I was considering doing the same thing just to sell it. But if I didn't how reliable would it be like this would you say?

Thank you ‼️

My mild custom 1998 Oldsmobile Intrigue 3800 Series II started a bearing rod knock as yours did - I changed oil to Synthetic and STP synthetic oil additive not traditional oil to nurse it, and it grew quiet but I'll keep my foot out of it. The main problem was standard recommended oil, it all started using passing gear oil sloshed a bearing dry.

@DIY_PROFESSIONAL

Жыл бұрын

I'm glad that worked out for you.

Thanks 🙏🏻 very much 👏👏✌️🥰 god luck 🍀

I done mine before they got to bad still driving it change oil frequently your good I changed mine at 200,000 just because of cold start ever slight knock til warm

really super duper helpful video sir . thank you so much

I have this noise on my Vauxhall Zafira B 2008 1.8 Petrol Design model, before the noise started Ive just had rocker gasket replaced, as well as the oil cooler gaskets & oil filter too, i think the camshaft sensors have gone. can you advice me please.

When repairing something like this, you have to be a bit of a detective. Ask yourself, "What would cause this?" The 2 answers are 1) not enough lubrication or 2) excessive engine speed. If there is not enough lubrication, take a look at the condition of the other rod bearings, and the main bearings. If something like a defective oil pump is the cause, then all of the bearings will have some damage. If it is just the one bearing, then I would suspect a clogged oil passage. The rod bearings are oiled by a passage in the crankshaft from one of the main bearings, in this engine probably the front one,. You can clean the passage in the crankshaft, and check to see if the passage from the block to the main bearing is clogged, which would also cause damage to the main bearing. Years ago, there was a service available where the journal could be ground in the car by removing the oil pan, and replacing the starter motor with a large electric motor. Various grinding stones would then be used to grind the journal round again. The engine would then be cleaned of the metal shavings, and the rod bearing replaced with a thicker one. I don't know if this is available now, as this is a very old way of repairing a crankshaft. Another possible repair is to buy a used crankshaft that is still in reasonably good condition, and replace the damaged one in the car. It can be a lot of work, but if a person does not have enough money for a rebuild, then this is a possibility. Also consider replacing the engine with a good used one from a wrecked car. These are some of the experiences I have had over many years repairing my own cars and friend's cars. Best wishes to you.

@princechigozie7194

2 жыл бұрын

Quite a word there, you said it all.. the point you said a clogged, answered it all. The oil galleries sometimes blocked either due to bad oil or lack of servicing as on when due, presenting am battling same issue on a 400 series Perkins generator, infact the number one Piston had to burst the engine block, I have to get another wreck good engine block, change crankshaft, Piston, metal and main bearing.. am at final stage of rounding up, the Gen will soon be use again

@garylangley4502

2 жыл бұрын

@@princechigozie7194 I hope that you can get the generator working again at not too great of a cost. My best wishes to you.

Thanks Borat 😊

would have really been helpful if you showed the steps for the installation of the new bearings, but informative helpful video.

Good video. This is happening to my 06 Infiniti M35. How much does a repair like this usually cost?

Did you replace all the rod bearings when you dropped the oil pan or just the one bad one? I'm curios if you only changed one if the returned knocking was from the others failing or the fact you didn't replace the rod, bottom hat and polish the crank.

@DIY_PROFESSIONAL

Жыл бұрын

I replaced just the one was making noise from what I remember...

thanks for the video, same issue on my 2016 Hyundai Santa Fe had to replace oil pump and crankshaft with one piston arm.

@DIY_PROFESSIONAL

Жыл бұрын

Happy to help

@johnnycage9914

Жыл бұрын

I have a 2014 Santa Fe same noise did that fix the problem

@DIY_PROFESSIONAL

Жыл бұрын

From the description of the comment that did fix the problem.

Lots of things you guys didn't even try. First of all you can't just replace only one and call it a day, you have to replace all and sand it a little to smoothen it.

I have a 2003 f 150 5.4 liter and ive had a knock for a while but after i was pushing my truck earlier you could heard it a lot more and it would knock faster when yiu accelerate, i changed the oil like 2 weeks ago and idk what it is, any recommendations?

@1430pj

2 жыл бұрын

Rod knock or bearing failure

how long did the repair last

My car have the same noise, I will try to fix it myself. Thank you very much

@DIY_PROFESSIONAL

Жыл бұрын

I'm glad this helped. Thanks for commenting🙂

Can I swap a 2005 tl 3.2 v6 and put it inside my 2004 ex sedan Honda Accord ?? Automatic on both transmissions… can I use the transmission from the Acura and put it on the accord or no!?… and how about the harnesses?

Hey I got a geo metro 3 cylinder, sometimes sounds like it's going to throw a rod and other times it sounds very smooth with no sounds like a slight knock. What could be the issue?

Have a 2002 Subaru outback with a 2.0 4 cylinder, and we're fixing to drop the crankshaft out clean it up and put all new rod and bearings in it this way the bottom in is nice and fresh it only has a mild knock but we all know sooner or later that's going to get worse and catastrophic might as well get on it now and fix it before it gets worse

I have the same issue started yesterday and I'm looking for solutions but its not a desperate process it's more of a learning experience. Would I have to rebuild the engine or just replace the damaged parts?

@DIY_PROFESSIONAL

3 жыл бұрын

Replacing the damaged parts should be enough. But the fastest way is to replace it with a good engine. You will need loads of gaskets and seals ones you tear it down. Also bear in mind that an engine is got couple of screws and parts that you will need to replace before reassembled. Good luck and Hope that helps

First video I’ve found that shows the exact problem and noise I have

Did you install the standard size rod bearings with the sound you had on this video ?

Hallo, danke für das Video. Ich habe exakt das gleiche Problem bei meinem Chrysler new Yorker 1995. schöne Grüße aus Deutschland

If the nocks coming from a Ford f150. The nocks more than likely coming from the bottom on a rod barring. Great video. I ran my 99 ran low in oil and I put oil back in it. Started nocking. Heard it louder from the bottom.

@DIY_PROFESSIONAL

Жыл бұрын

Thanks for sharing your experience.

@Smashachu

Жыл бұрын

BJ if you can hear it coming from the bottom of the engine it's going to be a rod bearing. The crankshaft sits inside the oil pan at the bottom of the engine. The lifters are at the very top of the engine trust me and save yourself some time you'll want to replace the whole engine.

@bjmccoy5060

Жыл бұрын

@@Smashachu oh yeah.. I'm not rebuilding it. I already bought a new ride so. In the long run if I keep it. I'll put a new motor in it. Its definitely locked up.

@bjmccoy5060

Жыл бұрын

@@Smashachu meant to say rod baring. Somebody else told me that. I appreciate the knowledge.

Hi good day could you please tell me what is the torque on the bolt for a Toyota avanza 1.5 vvt

Seat leon 2001 1.9Tdi here, changed the oil and oil filter a months ago, and like 3-4 days ago i started hearing that knock sound but only when i shift (so like if i put the engine on neutral or hold down the clutch the sound is there) but when i accelerate it goes away, and i don't think it's there when i engine break either, it's a loud engine so it may cover it up but u don't think so. What could this be?

@chriscusick6890

2 жыл бұрын

Piston slap maybe

Good men

Good video. Youd probably have got away with it if you'd polished the surfaces with very fine sandpaper and a wrapped shoelace. Does the trick most times.

You did other truck mean the engine lock on thetruck and you did? Or better can be fixed on truck

Emery cloth to hone the surfaces is a good all contact surfaces to prevent it spinning again and probably should replace the oil pickup too as it's probably clogged with bearing material

@GunPlayBreezy

6 ай бұрын

I just bought a 01 Ram 1500 SLT 5.2 Oil pan has left the chat on me after hearing knocking from under on a drive I will take oil pan off tomorrow to see as it is night time now but I’m mainly asking what all should I replace do I have to lift engine just to get pan off

Good info and advise thanks

Mate, get long screwdriver and put rubber end to ear and put other end on motor, move around until U find where sound coming from.

Thanks for been honest

thank you for the video. Does it cause more damages if I continue driving the car with the knocking noise? how long can I still drive the car from the moment I hear the sound? should I refrain from driving the car altogether?

@nedoscarsandfishingvideos5500

3 жыл бұрын

Yes don’t drive it won’t last long at all

@mduduzimahlangu731

3 жыл бұрын

Thank you@@nedoscarsandfishingvideos5500

@DIY_PROFESSIONAL

3 жыл бұрын

I don't recommend driving it. As long you drive the worse will get. To ask how long will drive ...depends on your driving style can last couple of months or weeks...

spun bearing. usually caused from lack of oil. at some point it probably had oil leak and ran it to low on oil in the past.

My car (camry 2018 Se) at times has a knocking noise when I stop at a light or when the car is is D mode.The knocking disappear when I put it in N. any advice on what the problem might be

@DIY_PROFESSIONAL

2 жыл бұрын

I am not an expert in automatic gearboxes but from what you tell looks like you have a problem with the gearbox.

@adamnorton4048

2 жыл бұрын

I have the same issue with my 2018 sonata.

@philjerome9795

2 жыл бұрын

Might be an oil pressure problem. Hook up an external pressure gage.

I have a Chevy 1996 5.7L 350 Sb is knocking noise. I took the oil pan out and found metal residual. I was told I need a new engine. The engine turn on and drives. Any advice please. Thanks

@Manny30004

Жыл бұрын

It’s a rod knock or bearings if you founds metals particles you do need a new engine or you could rebuild the engine

@DIY_PROFESSIONAL

Жыл бұрын

Hi. The most safer way to resolve this issue is to replace the engine . The metal shavings even if you change worn-out parts still can be stuck somewhere and at some point will come back in places you don't want. But if there is just a little amount off metal residual, and there are minimal damages, and you have time to strip the engine and recon/replace damaged parts there are good chances to be still good but you have to find out why engine was starving of oil in the first place. Good luck and hope this helps.

Car made noise and turned off and havent turned it on since, its best to get new engine? And if it messed up due to oil starvation, im sure the rest of the cranks gonna mess up too eventually or theres damaged components throughout the engine just awaiting to mess up? I would drive recklessly😂 need answers

@coastalblast5503

11 ай бұрын

Update?

@Mar_len.

8 ай бұрын

Any updates!!!??

My Little Ford Fiesta 1.4i was making a nasty clunking sound the other day I recorded the sound I immediately drained the oil and found ZERO metal fragments I took of the Valve cover casket and saw the seal was damaged so I replaced the seal now the car is not smoking anymore and the clunking is gone I couldnt believe it was probably low on oil since it burned oil.

I just did this job yesterday on my 07 grand prix I put a std bearing in but it still had a little play in it. I wanted to know if there is a little thicker bearing I can get. This is a great video keep help thanks

@vibrantalien430

3 ай бұрын

If Std bearing have the play, try the 10 size bearing, if that also have the play use 20. When you go for 20 remember it's the final point of the crankshaft. 20 can't hold load for too long.

@gregorymalchuk272

2 ай бұрын

Use green or blue loctite between the bearing shell and the rod/cap. The bearing will never spin again and it will provide some thickness. This is an actual racetrack practice and it works.

That's wonderful.. I also did to my volvo 850 too

Crank needs to be balanced as well sometimes it looses , yes you mentioned it

Video gave me confidence to get under car and drain it and take transmission oil pan off ,zz I have 2006 Subaru outback with this knock noise

@wangxiong2745

5 ай бұрын

The Subaru is way different due to it being a BOX motor, the casing has to be split apart. Just so you know and good luck. Coming from a former Subaru owner. I miss mine 😢

My father's subaru rattles and smokes on cold start then sounds fine (visible smoke only in cold weather). until you accelerate above 3000 rpm and the rattle starts again. I'm too far away to help my father, but the mechanics are telling him to change the engine. Does anyone have any advice or suggested steps to take? Thank you for taking the time

@iDontGetWifi

Жыл бұрын

I'm having same problem with my Honda Accord 01 but if I drive too aggressive with it or especially up hill it knocks so hard coming from the passenger side I have to let off the gas a little bit just to stop it

@DIY_PROFESSIONAL

Жыл бұрын

Apparently there is a problem with injectors from my experience...

Very Amizing thank you so much

Im very thank full for this video today i save my 30000 from yours tip

looked like potentially an oil starvation issue to that journal imho - it was dry as a bone so the same thing probably happened to the new one as the root cause wasnt fixed.

@gillespriod5509

Жыл бұрын

Crankshaft and Rod were already ruined, if they are scratched like that there Is no point on changing the bearings, Is too late the crank Will eat the new bearings in no time

So with all that being said, how much does this cost on average and at this point?

I did all this to my ford focus and had to fit new undersized bearings (thicker) and added the Lucas oil thickener...like the guy said.. the engine didn't turn over to easy but it wore its self in sufficiently..still going a year on

@DIY_PROFESSIONAL

Жыл бұрын

That is great. Thanks for sharing your experience.

@LeftInTheEnd

Жыл бұрын

I'm planning on doing this to my car...did you get undersized bearings because rod cap was scored? Did you sand anything down?

@sirrichardrichard5655

Жыл бұрын

@@LeftInTheEnd ...the main journal was pretty much egg shaped to 0.5 of a mm.. With the crank shaft still in the engine.. sanding it down would be impossibly difficult..I just fitted undersized bearings to make the knocking less apparent....the really thick oil helps stop the metal against metal problem of an egg shaped journal...good luck

I was very curious how far this car made it on this fix, not too far looks like !

What bearing ?

Very good video!

Sounds good dude, just add more boost like 1,5 bars would be fine and move ahead.

@tmo2798

Жыл бұрын

And also make sure to rev past 5500 RPM while it's cold to get cold oil circulating at the top end. That way the engine lasts longer and makes more power when you're ready to go.

@Big1_

Жыл бұрын

@@tmo2798 Exactly

@DIY_PROFESSIONAL

Жыл бұрын

😄

Thank You 🙏🏽

@DIY_PROFESSIONAL

Жыл бұрын

You're welcome.

Lmfaoooo the ending had me going

What is the dark orange goo between the oil pan cover?

@markpro546

5 ай бұрын

Might be gasket sealant

I think this can work only if the bearings have not spun. It may not be the right way, but can keep a car on the road longer instead of the junkyard.

This was super helpful

@DIY_PROFESSIONAL

2 жыл бұрын

Glad it was helpful!

Black high temp rtv sealing will work for the oil pan

I knew before the end that the end result wouldn't be good. As soon as I saw the spun bearing, I knew you should have replaced the connecting rod. More than likely, it just spun again.

my 2010 c5 1.6hdi has this problem .thought id found the fix here but going to have to scrap it.

Im kind of having same noise, but is there a way i can send you a video of the noise? Please help i dont plan into replacing another engine on this truck is a 2010 Nissan Frontier

@DIY_PROFESSIONAL

Жыл бұрын

You can load it into KZread and send me the link for the video. Thank you

@adriannieves1209

Жыл бұрын

Check your cranshaft sensors mighy be bad

You dont have to open on top .. did you only take bearing of and replace on the oil pan? ..

Can it be driven in meanwhile for short period of times ?? Will it damage the engine more ??

@DIY_PROFESSIONAL

Жыл бұрын

Yes . Will destroy it shortly.

@DIY_PROFESSIONAL

Жыл бұрын

It can, but I would not recommend it. The more you drive more damages it will create. At some point, the rod will become detached, and you will be stranded. If these are not big problems for you, then carry on using it. Hope this helps 🙂

Bent valve and bearing sounds like

Brilliant video thank u 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

Oil pump was probably original isue

Excellent video.

@DIY_PROFESSIONAL

2 жыл бұрын

Thanks

No oil pressure at idle usually/very often means the oil pump is gone. Maybe that was the problem in the first place.

Was worth a shot anyway

How did this happen to begin with? Could it be any holes were clogged up and no oil is reaching to the bearing? Either ways...great video. I hope this never happens to anyone's vehicle. I am suspecting this happened due to lack of oil on that specific piston.

@DIY_PROFESSIONAL

3 жыл бұрын

My opinion is because something blocked the access off oil in that area for some reason...either because of lack of oil in the engine or maybe some clogged holes like you said ...but also could be because of weak oil pump or just bad quality oil...

@lewisbotha7831

3 жыл бұрын

Probably bad oilpump...

@endurofan9854

3 жыл бұрын

i doubt about the oilpump, cuz if it was the oilpump it cud hav overheated, and the damge wont just be in 1 of the bearings but all of it specially the pistons and rings

Spun the bearing and when that happens that little oil port hole in the bearings misalign and close off. Then the crank journal REALLY starves on oil and it ovals off the rod journal on the crankshaft. Sometimes you can get lucky and only change the rod bearings and your ok. But it depends on how long you run the vehicle after it starts knocking

@spicykicksreviews9011

Жыл бұрын

What would you consider “running to long?” After the knock?

@zeekvega1385

Жыл бұрын

Yes how long would that be because I just screwed up royally

@gillespriod5509

Жыл бұрын

If you stop immediately when the knock appears you May have luck and save the engine, if you drive the car even a few km with the knock the crank gets ruined and goodbye engine

@GT-Tezzy

3 ай бұрын

​@gillespriod5 Not necessarily goodbye engine but new crankshaft new bearings

I have this noise on my passat estate 2l tdi it does this noise from cold start but eventually goes off after driving about for 10-15 minutes. Do you have any idea what it could be ? As it's not constant

@EG3RED1138

Жыл бұрын

Drop a quart of transmission atf4 in the engine and run it for about a week then drain and Change ur oil as you should 🙄

Can you change the bearings without grinding the crankshaft?

@DIY_PROFESSIONAL

Жыл бұрын

Yes , but the result may not be ideal. If no damage was made to the crankshaft then your good.

@marcusmarrs

Жыл бұрын

If you have a rod as loose as this one, not only can you NOT avoid regrinding the crankshaft, there’s a good chance the crank wear is past the point of grinding. I’ve seen many worn way past .030 rendering the crank junk.

Thanks for the info at the end. 😆

Top vidéos Belgique

Bro u change all the bearnings and rods? What was he cause how u fixed up? It need to change all rods ? Or only the one with problem?

@DIY_PROFESSIONAL

2 жыл бұрын

Hi. Only the one with problems.

@sSs-ts6oi

2 жыл бұрын

@@DIY_PROFESSIONAL and the noise was gone?

@TheDrill65

2 жыл бұрын

Will a bad bearing cause white smoking from tailpipe too?

@TheDrill65

2 жыл бұрын

@@sSs-ts6oi Hi will a bad bearing also cause white smoking from the tailpipe?

@sSs-ts6oi

2 жыл бұрын

@@TheDrill65 dont think so

weak oil pump can cause oil starvation at idle or a restriction. probably should have replaced oil pump to