Please tell this to all the "influencers" who are spreading nonsense all over.

@rvkvikas

Жыл бұрын

Let's us share this video ALL Over the internet brother. This is a very important matter, which Tarun bro discovered with his daily, on hands experience working on Engines.

This is an Important information for all the Motorcycle Lovers across the world. Thankyou Vikas Sir for making such an informative Video.

@rvkvikas

Жыл бұрын

Thanks a ton brother

this is what we call real influencer......but sad part is people are blindly following so called influencers who doesn't even know basic motorcycle maintenance and do ride with folded and no mirrors, rev bombing near girls, lose(with no proper slack) and dry chains, etc....

Next, need info on 4t shooter or additive that is added to fuel tank.

@rvkvikas

Жыл бұрын

Sure brother!

to clean sludge, oil solvency is much more important than detergent. If you want to clean the engine, using grup 1 oil work better than engine flush. better if you mix it with palm oil or corn oil

Thank you soo much for sharing the content like this. I was not missing your podcast series 💯💯❤❤

Thanks for such informative content bro! Always loved learning stuff from your uploads.

Nice informative video. Was about to 11:55 flush my old activas engines through some equipment in a workshop which I feel shouldn't be done.

Nice to recall this info after a long time. This stuff suddenly become popular in recent time

I think this information was already out especially for cars and the same thing applies here as well. Thanks for spreading this to a larger audience

Rite time rite video for me. My bike done 55000 km thinking about engine flush after watching this video I don't even think about it. Thank you Anna for informative videos. Keep educating the bikers.

Make a video on Engine decarbonization. Much needed one

Personally I don't recommend engine flush for smaller segment motorcycles, I once did that on my 12 year old CB Twister 110. All the major oil seals were damaged.

Vikas sir and tarun brother... Now much thanks we say to you guys it's less... This is the only channel where clear cut information is served...! Love you sir and brother... You guys are our heros ✨✨✨

@rvkvikas

Жыл бұрын

Thank you very much brother!

Sir please one podcast on "Engine Oil And Coolant Mixing" And How to avoid it, what are the precautions to be taken!

@kupas2

Жыл бұрын

don't use synthetic oil, use better coolant.

Very useful and informative video!

Hi vikas sir please make more videos like this,i met you in the bank few years ago, thankyou so much for selfie,Big Fan❤️

Thank you sir.great informative videos

Vikas Sir is THE BEST 🙏❤️

Bro really thanks for the video. Even i thought of using engine flush on my motorcycle. But your video helped me to avoid using engine flush. Please keep posting more informative videos like this. Please let me know can we use engine oil additives while replacing new engine oil

What about using diesel or tarpin oil for flushing

Thank u so much for this informational video

Any openion about using Fuel X on a dominar 400 2022 model? Will there be any change in vibration?

Could u also make more informative videos on dominar 400 ug. Really great content!

Pls make a video on properly rebuilding an old engine with new components. Do's and Don'ts

Hey, vikas what about engine oil additives like Abro oil treatment?

Thank you sir !

Again,first one to like and comment.And lots of love for your efforts and work❤️

@rvkvikas

Жыл бұрын

Thank you so much 😀 Brother!

Absolutely correct 💯.

Want more podcasts with tarun👐🏻

I have been waiting for this video finally thank you sir

@rvkvikas

Жыл бұрын

Thank you brother!

Great topic. Everyone should know.. 👌

@rvkvikas

Жыл бұрын

Thanks brother

Make video on liqui moly Mos2 . please

Can we use it in New bikes and will it help in clearing the metal shavings from the engine or we have any other way to do it.

Can i use racing oils like motul 300v Or 300v2 in my Duke or should i go for 7100 only?? Is there any major difference between racing synthetic oil and normal synthetic oil?

next video make it on ,do we need MOSO2? waiting!!!!

Very crucial information inseminated..

Absolutely true I am also thinking about this sometime old engine are running due to this carbon deposit of you remove them they will start leakage compression and all rubber parts will get worse

The engine flush will also clean your clutch plates effectively causing too much friction between them. It will destroy your clucth.

thanks for the info❤ but what about the Mos2 engine oil additive ? is that safe or useless.

@rvkvikas

Жыл бұрын

I shall discuss this with Tarun bro and update you brother! Thank you!

This video deserves a like, share and subscribe

What about mileage increasing liquid?

Can you please talk about ktm rebuilds and how to do them and what is the procedure it will be very helpful as I am planning to buy a bs4 ktm rc 390

@rvkvikas

Жыл бұрын

Sure brother!

I learned about this detergent thing in oils when i wanted to change oil of my pressure washer Washer uses non detergent oils

As always nice content👌 But what about the Engine Oil Additives and Petrol Additives specially in KTMs? And exactly after how much Kms Engine Oil must be changed?

@rvkvikas

Жыл бұрын

Great point!

@3rdclasstatamahindrabajajREtvs

Жыл бұрын

Ktm refers fully synthetic oil. Easily lasts 6-7k kms. You can change it every 7k once. Modern engine oils are very long lasting.

@AndrewNoronha-cb2gy

Жыл бұрын

Ill tell you my opinion I think ull find it makes sense.. If ur going to buy an additive consider putting it in after the oil has passed its half km usuage. At that time the oil is already slightly worn out and the additive will help.

Good information bro

@rvkvikas

Жыл бұрын

Thank you so much 🙂

Are aap mumbai me kabhi service centre dalo... mereko honda shine service karni hai... I am you tooooo old subscriber

I had used engine flush only once in my KTM that also when the coolant was getting mixed in the engine oil around 22000 kms

Hello sir my bike is royal Enfield Thunderbird 350x which I have riden about 42,000kms I do service my bike at correct intervals. But now my bike burns engine oil for 500kms 150ml oil is getting used. I have also checked my rubber gasket their is no oil leakage from anywhere but still my oil level goes down. Please tell me solution for me. I never used any engine flush till now. I am totally confused state

synthetic oil can make piston ring stick to the piston, causing compression loss. Engine flush leftover in the engine (oil do not fully depleted during oil drain) will make this much much worse.

Omg after a long time

@rvkvikas

Жыл бұрын

Thanks brother!

❤👍

Liqui Molly 4t additive shooter is also bad ?...🥺

@rvkvikas

Жыл бұрын

We will discuss this soon brother

VALUABLE INFO

@rvkvikas

Жыл бұрын

Thank you brother!

Why I am not getting any notifications from you, nearly I stopped watching your videos from Covid due to the bad notifications or only I am facing this issue!!!!! Today suddenly I am watching random bike video’s suddenly I remember you and Lucky me still I remember your name. As usual always sensible video to the fellow commuters 🙏🏻🙏🏻🙏🏻

@rvkvikas

Жыл бұрын

Thanks for the support brother

Bajaj flush my engine on my 1st service of D250 which was 450 kms old.. now what would be the scenario for the new bike now

I have a motorcycle with 2000 miles. It was running perfectly. After the first service it was running perfectly. After the second service it now makes a knocking noise that start 35 seconds after I start it. The dealership just changed the oil but it’s already black. There are no other strange noises other than the knocking. The oil is black after only 3 hundred miles. Why is it knocking and why is the oil black?

The morale : Either use Engine flush on regular intervals say every 15k KMs or don't use it at all !!

Tvs service centres forcing to use flush. Says tvs recommended

What is the service center name and location of this person?

@rvkvikas

Жыл бұрын

+91 80743 14034 Tarun. Please call him brother. Thank you!

👌

You didn't reply to my question on decarbonising.

@rvkvikas

Жыл бұрын

Hey brother, sorry, what is the question?

Vikas sir I've seen ur video about decorbanization is it ok yesterday i did it my bike has done 48k

@rvkvikas

Жыл бұрын

Yes brother, that is fine :) Thank you!

@rvkvikas

Жыл бұрын

This important factor about Engine Flush; we got to know because of Tarun brother!

@3rdclasstatamahindrabajajREtvs

Жыл бұрын

Decarbonization is just waste of money. If you really want to get rid of carbon deps, you have to open engine

but in new bike, there is no carbon

U know what is the best engine flush? Coca-Cola! We have tried and it gave best result! ! Nice video though ❤