Dude. Are you kidding me? I’ve been looking for this small detail for 6 months. I see it now, it’s obvious. Thank you.

You saved me! I was going crazy because on larger prints it would start shaking and all the prints at some point become to be horribly wobbly finally I can fix the bed 😍

This was exactly what I was looking for. Didn’t know why my Y-axis was so wobbly on my Ender 3 Pro. This fixed it. Thanks!

You are a god damn genius my friend. Been having trouble with my bed and just seen this video, but now I have to go to work so can’t play until I get home. Never knew the nut tightens it, so excited now to try this 🎉

Took down my printer for some maintenance for the first time (should have done it years ago) and this was by far the biggest issue. Thank you for the video, saved me a lot of time!

Thank you for the short and on the point video. Saved me half an hour.

Thank you. I had a loose bed. Didn't know if it was supposed to be as i have no experience printing. This is exactly how all how to's should be. To the point. Quick. And all inclusive. THank you again.

This totally saved me a ton of time and frustration, thanks!

Dude thank you! I have been struggling to find out when my bed wouldn't stop woobling and this was it! You are a badass!

Awesome Video. I knew what do and have tightened up those screws a lot of times allready. But honestly - i didn't know how it worked. I've never fully disassembled that and seen the off-centric thingy. Thanks a lot for those close-up shots!

I would have stripped the entire thing down had I not seen this video first - You saved me a ton of problems - Thanks

Fixed my wobble, much appreciated!

I'm so happy I found your video, I've been chasing my tail trying to get my bed leveled out and this was my problem.

I've bought my Ender 3 S1 Pro few days ago and the bed was really loose... This tip help me a lot! Now I need to level it again, but it'll be worth it! Thanks!

Wow! I kept leveling the bed, then I discovered if I pushed down on it even slightly, totally knocked it out again. Just a small adjustment as you have demonstrated here, fixed. Thanks bro!

You are the man! No one ever mentions this

This fixed my issue! Had no idea! Thanks!

Life saver. I just bought an ender v1 and thought: I'm screwed, it's so wobbly, I'll never be able to level it!! And now, Boom, steady as rock (so to speak) :) Thanks so much

THANK YOU SOOOO MUCH MAN!!!! You solved such a big problem for me

Thank you 🙏🏻 I had this issue for days

Thank you! This had me freaking out till i found your video!

TYSM! This is going to help a lot

Didn't know about this, this is really nice made from Creality, my Z-aixs is messed up and always too tight, I'm going to fix that now. Thanks

Thank you so much!! helped alot

thank you so much, that helped a lot

Thanks for this tutorial help me to initial setup my new ender 3E

WOW! I thought my bed was warped badly I just couldn't get it leveled! I am going to recommend this to any one new to 3d printing.

life saver! Thank you

I thought this was normal. Thanks for the advice!

THANK YOU! Ihave a Voxelab Aquila that has serious adhesion problems and a leveling nightmare. The bed has wobbled since day 1. I never knew about the eccentrics...

Thanks for this video, Tony. I just got in and her class and the table was really loose. I own three ender s 1 and I’ve never seen this happen on them. I got the plus today and I was like ugh it’s bad. I’m gonna give it a shot and hopefully it helps. How tight should a belt be

Thank you!!

Excellent, I'm pretty sure this is the problem with mine. I somehow without knowing what I was doing must have adjusted them because the bed isn't wobbly, but it is apparently incredibly crooked, so I must have loosened it, pushed it out of alignment and fastened it again. Time to check it out and set it right. EDIT: Hm, looks to be snug and not binding, but for some reason one of the corners on my CR 10 Smart Pro is still impossible to get leveled for some reason. I had it level when I got it and I'm not quite sure what's happened. I tried ensuring the gantry was level, using the technique shown in another one of your videos, but that wasn't enough. When facing my printers display, the left hand corner closest to me is much further from the nozzle than the other corners are, to the point where adjusting the spring-tensioned corner leveling knobs, I run out of screw and the adjustment wheel comes off before I actually am able to bring it level. I've found others with the same problem, but typically people suggest like 10 different fixes, and then the poster just says "solved it" without explaining what worked and what didn't. Very frustrating.

Thank you for this..

Thanks so much

Awesome thanks bud

Thank you, that is the exact problem I have.

Thank You , it worked

Thanks man!!

Excellent:-) thank you

Thank you soooo much !!!!!!

Plz have my kids, this was very helpful thank you🙏

Thanks i had this issue

You the man!

thankyou!

Thank you

Thanks, I had no Idea those were cam bolts.

Brilliant.

For some reason every time I try to tighten the bolts on the bottom the ones on the top move with it. Any tips? I can’t seem to get the rollers tightened at all

my platform dose not look like yours. I'm having the same problem. Every time I try leveling my bed in the middle of my print it starts moving and runs into the print with the nozzle missing up everything T.T I think I managed to titan it. I hope it works the same...

so if the back of the bed is above and the front is lower, what could be the solution?

I just got mine not to wobble but now it is so out of level that one corner is so high no matter how much I release the leveling knob it won't budge, I have the Ender 3 S1 plus.

Their preassembly has screwed me because it came all wonky and unlevel.

I bet this is my problem I print bigger project and about 10% through the print shifts towards the backward. Ig ima have to go through and tighten all the bolts myself

I was so 🤏🏻 close to return my printer before watching this video

I have an Ender 3 v1. It looks completely different to this, and none of the bolts/nuts have offsets like that.

thanks a bunch

The proper name for those are concentric nuts... Edit * eccentric nuts

There called eccentric nuts there all over the machine make sure they’re all tight but not too tight ✌🏽

HOW DO YOU TAKE THE BED OUT ? come on man explain shir

@AckzaTV

6 ай бұрын

oh wait i can reach it with a wrench! migos offset+

I thought mi printer was damaged during shipping 😅

i fucking hate electronics now everuthing i buy new breaks or comes broken

It's not really a fix, it's called setting the printer up correctly.

@pepebiondigmailcom

Жыл бұрын

but it's not anywhere in the manual, it's impossible to figure it out when putting together a pre-assembled model. Fells like low quality and weird because everything else fits great.

@dojo3175

Жыл бұрын

Its a fix alright. Go through the Ender setup and show me where they told you to do this during setup because I followed the directions carefully and never saw it

@weldingjunkie

Жыл бұрын

It’s a fix from the factory that came incorrectly assembled

@TheRattleSnake3145

Жыл бұрын

@@weldingjunkie so your're saying he set it up correctly?

@TheRattleSnake3145

Жыл бұрын

@@dojo3175 so you're saying he set it up correctly?

That pointing and shaking your finger to me is like you are mad at me :) Please stop or try to reduce it.

Ruined my printer….