in your glue up put a sacrificial board on that can be cut off on the table saw after your plaining , it works for me

A lot of talent in this beautiful work!!! Congratulations!!! Marcus 🇧🇷

Beautiful work

Hermosa tabla, como el atardecer, gracias maestro!!! 👌👍

Unique.... awesome

Beautiful work and creative. I love to build cutting boards myself . But have yet to master one so nice.

All your videos are phantastic!!!

@thewoodplank4376

2 жыл бұрын

Your too kind, Thank you!!

I've learned so much from watching your videos. I appreciate your craft and how you share your process and perspective. Not only do you have great woodworking skills, you're an artist. All of your boards are beautiful. Thank you for taking the time to film these and share your work.

Incredible

@thewoodplank4376

2 жыл бұрын

Thanks so much!!

Been waiting for your videos, beautiful cutting boards.

@thewoodplank4376

3 жыл бұрын

Thanks so much!! Long overdue with the videos but the wait is over!

what a beauty;-)100% sunset

@thewoodplank4376

2 жыл бұрын

Thanks! Not very easy to paint with wood.

AMAZING!!!

@thewoodplank4376

2 жыл бұрын

I really appreciate it!! 🙌

Amazing board.

@thewoodplank4376

2 жыл бұрын

🙌

Beautiful board, beautiful video, beautiful music! You're off to a fantastic start with this channel, man! Kudos!

@thewoodplank4376

2 жыл бұрын

I really appreciate it!! I basically locked myself in my shop for the past year working out ideas and getting the technique down. I am at the point where I want to share all the things Ive been working on. Thanks for the support, more videos are on the way!!

Awesome! Well done!

@thewoodplank4376

2 жыл бұрын

Thanks!! I appreciate it! 🙌

Just found you channel. I really enjoy watching

Awesome stuff. Keep making these videos please. Also would love some commentary!

@thewoodplank4376

3 жыл бұрын

Thanks!! I’ll probably bounce back and forth between music and commentary, your input is always appreciated!

Very le epik video. Its satisfying.😎

@thewoodplank4376

3 жыл бұрын

Glad you think so!

Красивая природа и доски красивые у тебя получаются,👍!!!!!

@thewoodplank4376

2 жыл бұрын

👍

One of the best looking boards I've seen. Really nice job!!!

@thewoodplank4376

2 жыл бұрын

I really appreciate it!! It was a fun challenge trying to turn a sunset into a cutting board, most of my boards are inspired by nature. Thanks for watching!

@eudoriooliveiranetoneto6831

2 жыл бұрын

Muito bacana seus trabalhos Vc e qual estado?

Awesome video and board!

@thewoodplank4376

3 жыл бұрын

Thanks so much! More vids are in the works!

That's a thick board. 2" or more? You got a nice place there. Really peaceful!

I really appreciate the different cutting boards you have been making, and what each one means. My questions are on the juice grooves and hand holes. Do yoy make several passes to get to a depth, or hog it all at once. Thanks.

Beautiful board and beautiful views! I'm not too far from you up in the mountains of VA. My dream is to find a view like yours in my back yard as well. Keep up the great work on the boards and videos!

@thewoodplank4376

2 жыл бұрын

Thanks friend, always keep the dream alive! 🙌

Dude where have you been. Did you move or is this as far as you have gone. Please give us an update and let us know how you have been. What’s new in your life. Thanks for the great videos. Very rewarding to watch.

I’m a new subscriber I’m glad I found your channel. You really inspire me. To want to build stay safe.

@thewoodplank4376

2 жыл бұрын

Thanks for the sub and I wish you all the best on your woodworking journey 🙌

Great looking boards love the colors. If I may ask what size do you initially cut your strips when making a cutting board?

Another beautiful board. What bit did you use when routing the juice groove and what bit when routing the fingertip groove?

Very beautiful and inspirational boards. What is the size of the opening on the jig you use to cut the finger holes?

Muito bom

Thank you for showing the tedhnique! What is the purpose of sanding at 3:16 after planing?

I have made many end grain boards in the past few years but have never imagined or have seen a design like this. Very impressive and pleasing. I do not put a trough around the cutting surface because I caution folks not to cut meat on the board. After flattening an antique butcher's block on legs, I know how the juices can turn rancid to the point of being nauseating. How do you treat the board to keep it from absorbing the meat juices? Thanks for making the video.

@thewoodplank4376

2 жыл бұрын

A juice groove can be helpful, I think as long as you use a tight grain hardwood, and keep the board oiled/waxed you should be ok. Also its not just for meats, watermelons and various other fruits can also produce a lot of fluid. Some of my boards are reversible for this reason, one side for veggies one side for meats.

Beautiful work! Is that a core box bit for the juice groove and if so, what size do you use for this size of board? Thanks!

That is an amazing cutting board. What type of wood did you use? Also any build plans?

@thewoodplank4376

2 жыл бұрын

Thanks! Easily my favorite trio of hardwoods, walnut, cherry and hard maple.I've had some requests on build plans and I may try to figure a way to accomplish that, we'll see!

What brand bees wax did you use on the cutting board agter the mineral oil bath. Also where can I buy it

I know that I have not seen every cutting board that you have made but I have never been disappointed in the ones I have seen. Are most of your cutting boards around 2 inches? Thanks

@thewoodplank4376

2 жыл бұрын

Thanks so much! Yes I normally build a slightly thicker board at 2 inches. I also like to make "prep" boards a little thinner at 1 inch, everyone really needs at least two boards in the kitchen 👍

Amazing as usual! Do you wax the top only?

@thewoodplank4376

2 жыл бұрын

Thanks! I wax the top, bottom and sides, This way if the new owner neglects it a little there will be some good initial coverage.

I really like your cutting boards, where do you buy all your lumber

@thewoodplank4376

2 жыл бұрын

Thanks! Acquiring lumber is the hardest part, it's a constant scavenger hunt. Basically anywhere and everywhere but nowhere in particular.

Suddenly I want to do a cutting board that pays tribute to Impressionism Sunrise.

@thewoodplank4376

2 жыл бұрын

Let me know if you do I'd love to see it!!

What kind of woods are used here?

When you do your initial glue up, are you starting with face or edge grain?

@thewoodplank4376

2 жыл бұрын

It often varies, but with this board design I started with edge grain.

@russelltaylor736

2 жыл бұрын

@@thewoodplank4376 Thanks! I love all your work. You inspire me.

Where do you live? Looks beautiful there. Great work 👍🏼

@thewoodplank4376

2 жыл бұрын

WNC no shortage of inspiration.

What grit sand paper do you use in your drum sander?

@thewoodplank4376

2 жыл бұрын

I mostly use 80 grit and the occasional 100, with endgrain the higher grits help but will tend to burn. I've also started buying the sandpaper in a roll and cutting it myself, saves a lot of money.

where do you get the feet for your boards? are they stainless steel?

@thewoodplank4376

2 жыл бұрын

After going through a few different rubber feet I found a set I really like on Amazon and they come with stainless screws. I have a link in the description in a few different videos.

Just curious, why do you put the feet on before the oil?

@thewoodplank4376

2 жыл бұрын

I know its a little backwards, two reasons 1) I like to make sure there is no wobble or issues before I put the oil on. 2) Once the board comes out of the oil its best to keep airflow underneath, with feet already attached its quick and easy, this is just my protocol.

Потрясающе !!! Можно я кое-что повторю ? 👌

@thewoodplank4376

2 жыл бұрын

Действуй!

I subscribed. Beautiful Work, Wonderful Music. ASMR. At 64 I am looking forward to making Cutting Boards of this Quality. I am in Maryland where some properties sell for millions on the coast. I think they are worth $500 as a closing gift for a Realtor. Your thoughts please.

@thewoodplank4376

2 жыл бұрын

Thanks for the sub! This was the first video I made and I kinda wish I could re-edit it but hey, gotta start somewhere. These do make great closing gifts. My personal experience with realtors is they don't want to spend that much on a closing gift, (although mine haven't been million dollar properties either) and usually they want thier logo engraved somewhere. I think once someone sees how much of a difference a board like this can make in a kitchen, they catch on fairly quickly!

Beautiful cutting board. Video would be much much better if the work were verbalized.

You use glue almost as wastefully as my daughter uses bubble bath lol

@thewoodplank4376

2 жыл бұрын

I agree, I tend to overdue things.

Isn’t this edge grain?

@thewoodplank4376

2 жыл бұрын

I primarily stick with making endgrain boards like this one but may do some edge grain videos in the future.