Awesome Video! Thank you!

That was your best ever video. You are quite the teacher. Your explanations were so sharp and understandable. So much info all in one place

@MakerPipe

Жыл бұрын

Thanks so much Dianne! You’re very kind.

Thanks for this. Helps me plan out how and where I need specific things for my basement

@MakerPipe

3 ай бұрын

Awesome, glad it was helpful! Good luck with your basement project

Rain tight connector, that's what I need. Thanks!

@MakerPipe

5 ай бұрын

You're welcome! Thanks for the comment

Very good intro to EMT fittings. I’m an electrician and you taught me a few things. Thanks. It would be nice to have you give technical comparisons of your connectors and the electrical counterpart. That way a builder can be certain they are using the correct hardware for their project.

@MakerPipe

9 ай бұрын

Thanks for the comment! I am glad you found it useful. That is a good idea for a video. In the meantime, here is a complete walk through of our system that might be helpful. kzread.info/dash/bejne/iaqFqLeSh6e2oco.htmlsi=7R1nlS3ndmTqTWl5

Nice educational video. I used some of the couplers and 90’s before discovering Maker Pipe. They can be useful for situations where maximum strength is not needed and sometimes they fit where MP may be too big.

@MakerPipe

Жыл бұрын

Glad you found it helpful Garrett! Thanks for watching and commenting.

Great informative video. I appreciate your time, effort and money you spent to make this vide. Great channel.

Thank you so much.. this video is so helpful to me.

Good presentation, thanks.

@MakerPipe

6 ай бұрын

Thanks for the comment!

Great video. 101 for the DIY's.

@MakerPipe

6 ай бұрын

Thanks, glad you liked it!

thanks for sharing

Helpful, Thanks

@MakerPipe

Жыл бұрын

Glad to hear it. Thanks for the comment!

Great video

@MakerPipe

Жыл бұрын

Thanks Ernesto!

4:25 how can I create a 90 elbow by myself and expand the start and end?

What type of threads these electrical conduits? Is is NPT or NPSM?

Thank you for this great informational video. Is there an EMT to NMC compression coupling besides the set-screw style?

@MakerPipe

11 ай бұрын

Glad you enjoyed it. I don't believe there is one, at least not commonly available. Thanks for the comment.

Great video. What's the advantage of buying the connectors and stuff from Maker Pipe versus a box box store?

@MakerPipe

8 ай бұрын

Thanks for the comment and question. The connectors at the big box store are designed for electrical work and the connectors that we make are made specifically for DIY projects. Our products aren't in stores yet but fingers cross for the future.

Nice explanation of all the accessories. Are there any adapters that can connect 3/4 conduit to 3/4 or 1" square tubing?

@MakerPipe

Жыл бұрын

Thanks for watching and commenting Billy. There might be a solution for that but I have never seen one before. Would make for a great accessory though!

I need a reductor from 1/2 " emt to 3/4"

Are there any types of emt to nm connectors that you can install after the workbox is already installed? I have a weird situation where I can't open the wall. It's decorated.

@MakerPipe

5 ай бұрын

Hi there, thanks for the question. You might could make this work. www.homedepot.com/p/Halex-3-4-in-to-1-in-Non-Metallic-NM-2-Piece-Clamp-Connectors-5-Pack-26512/100179425

@legalize420

5 ай бұрын

@@MakerPipe I totally forgot I can just cut the nails and install an old work box too. Thank you so much for this though.

Please show written names on the screen .

@MakerPipe

5 ай бұрын

Thanks for the feedback

Useful, but dude stop with the terrible background music.

@MakerPipe

4 ай бұрын

Thanks for the feedback!

EMT is not pipe, it's tubing Have to be carefull with some of the POS garbage that big box stores sell. NEVER purchase or use garbage die cast fittings especially crap made in India. Code does not require bushings for conduit with all of the wires smaller then #6 guage. If you install garbage die cast fittings and move the conduit say more then 15 degrees it often egg shaped &/or cracks. Best practice is to run 3/4" RMT instead of 1/2" from circuit breaker panels to first pull box in case you need to add additional circuits. 99.9% of the time you never need a two hole strap to secure conduit. Sparkies call the pipe hanger straps mineralacs or mini's.