You always do the most interesting things with your laser, I really appreciate your creativity figuring out what else your laser can do.

@LaserEngraving911

9 ай бұрын

Thank you very much! I love doing that kind of stuff!

*I’m glad I stay until the end. I almost stopped the video when I saw the results after the powder was applied. Huge Difference After the Heat is Applied!!!*

@LaserEngraving911

8 ай бұрын

Its pretty cool tech for sure! You should see the black!

Going to put my wife's logo for her new business on an order book for her - thanks so much for sharing

@LaserEngraving911

9 ай бұрын

Fantastic!

Nailed it! Great technique! Can’t wait to see the full video.

@LaserEngraving911

9 ай бұрын

Coming soon!

Awesome. Last step blew me away!. Great work mike. Thanks for the lesson.

@LaserEngraving911

9 ай бұрын

Glad you liked it! your very welcome

Very cool! So, much info! Thanks for the video.

@LaserEngraving911

9 ай бұрын

You bet!

Excellent, never thought of embossing with the laser before…always appreciate your content.

@LaserEngraving911

9 ай бұрын

Thanks for watching!

Thie was excellent. I got so many ideas floating around in my brain. Thanks!

@LaserEngraving911

9 ай бұрын

Great to hear! I thought so too!

I’d love to try this for some leather shoes! Great video thanks:)

@LaserEngraving911

9 ай бұрын

Go for it!

Great demo! I'm going to try this out on some PU journals.

@LaserEngraving911

8 ай бұрын

Have fun!

Great video, awesome result, another project for the laser. Thanks for taking the time to make this video👍

@LaserEngraving911

9 ай бұрын

No problem 👍 Thanks Dave!!

Great video! Thank you!

@LaserEngraving911

9 ай бұрын

Glad you liked it! Thanks!

Great video!

@LaserEngraving911

9 ай бұрын

Glad you enjoyed it

That is freakin' awesome!

@LaserEngraving911

9 ай бұрын

Thanks!! Hope To Inspire!

@AnthonyGriz

9 ай бұрын

@@LaserEngraving911 definitely inspiring, thank you!!

That’s awesome 😮😮😮👍🏽👍🏽👍🏽

@LaserEngraving911

3 ай бұрын

Thanks!

The ducky stole the show ❤ How long does the glue stay usable on the pad, once closed up? Fun little project!

@LaserEngraving911

9 ай бұрын

Thanks!! I found the glue stay pretty wet and tacky for about 3-5min hope you have fun experimenting!

so it was , mm this is interesting, then ah, oh wow followed so cute!

Screen printing is also a good method.

Excellent !. Do you think stamp rubber would make a embossing stamp as well if glued to a hard backing. I think it would go better into the little grooves of the leather, or maybe it would push out from the stamp and ruin it all.

@LaserEngraving911

2 ай бұрын

Great idea! always worth a try, anther material might be lino stamp material.

Thank you so much!! I've been struggling all summer to add gold lettering and graphics to leather luggage tags, and I've wasted a lot of time and effort. I tried liquid mask/liquid gold leaf/leather primer and finishes in so many iterations and orders, and I was about to give up. Thank you, I can't wait to give this a try.

@LaserEngraving911

9 ай бұрын

Glad I could help! it works best one smooth finished leather, no so good on raw vegtan, because the glue soaks into the raw leather to fast, need the glue to float ontop, so your application should work well

@ivorytuskmeg

9 ай бұрын

@@LaserEngraving911 That's reassuring, thanks! If I may ask, have you ever experimented with using tape or liquid mask to keep the glue in place on your design versus creating an acrylic stamp? The stamping technique seems perfect for a scenario wherein I'll be making the same design repeatedly, but if I'm making different monograms for each customer, my desire for efficiency wants there to be an easier way. Haha. Thanks, your channel is wonderful.

@LaserEngraving911

9 ай бұрын

@@ivorytuskmeg Yes, and my final thoughts are do not put anything on the surface like mask or tape, liquid mask that may affect the finish of the leather or leatherette, the way I demonstrated I had the best results with.

Did you do a video on making the actual acrylic debossing stamp?

@LaserEngraving911

7 ай бұрын

Working on that!

Would like to see if these could be used for debossing and pressure activated foils.

@LaserEngraving911

8 ай бұрын

I think you need heat and pressure for those foils, thats why they use metal stamping dies, you cant heat the acrylic up hot enough to activate the glue on the foil, unless you know of a foil that doesn’t require heat that would work

Great video! Very helpful. If I may ask, how do you make the stamps? Do you have a tutorial? Or svg files for sale?

@LaserEngraving911

5 ай бұрын

Yes I do! coming in another video

Looks like a course powder coating paint... makes me wonder if I can adapt that stuff to do this (on account of I have 3kg of the stuff lol)

@LaserEngraving911

9 ай бұрын

I thought so too but its very different even tried this method with powder coat paint with poor results, Embossing Powder is a different animal

Do you have a video on how you made the stamp?

@LaserEngraving911

9 ай бұрын

Yess!! The full tutorial is coming next week!

I would like to use it to emboss some chopsticks but I'm not sure it would work since I would need some small features.

@LaserEngraving911

6 ай бұрын

not so sure that is going to work :( have not tired the powder on wood, but regarding how small you can go, you could make a stamp that small for sure.

@bitsurfer0101

6 ай бұрын

Have you tried using/making rubber stamps?@@LaserEngraving911

I think you should prep it with antistatic pad..

@LaserEngraving911

7 ай бұрын

sure give it a try, I did not find that necessary, but if you think it would help go for it!

how does the embossing hold up with wear and tear? Any special steps to waterproof?

@LaserEngraving911

8 ай бұрын

Hold up great when done right, and it depends on the surface you are using it on as well, its water proof!

I got a 911,I bought a comgrow z1 and I am unable to connect it to lightburn or laser grbl I can see it in device manager but it wot connect.

Can you put embossing powder into an engrave (without the glue) and melt it instead of trying to paint fill an engraving?

@LaserEngraving911

9 ай бұрын

possible yes! but make sure you sweep away all excess outside the engraving, and not sure if it bonds to wood and other substrates

Out of curiosity, why did you create the stamp using acrylic as opposed to the rubber stamping sheets? Do you see a benefit of one over the other?

@LaserEngraving911

9 ай бұрын

Rubber is very stinky and require extra clean up, and more expensive, acrylic works just fine

What is the smallest feature size you've tried to emboss?

Can a similar embossing stamp be made with a diode laser using a black acrylic?

@LaserEngraving911

7 ай бұрын

I don't see why not, it will probably take you a while to get he depth required suing a diode, but in theory, its do-able. 👍

@davidpalmer8419

7 ай бұрын

@@LaserEngraving911or could you engrave the leather first and then fill the engraving with the embossing powder? sorry for all the questions lol. Im getting my first diode laser tomorrow :)

I usually use heat transfer foil vinyl, but I'm curious how using embossing powder would go! Do you think that using a heat press would melt the powder effectively with a silicone sheet cover, or do you think it would be problematic with the glue? Another fun idea: engraving the leatherette journals and pouring the embossing powder into it! (Making sure of course that there's no PVC in the journals. 😆)

@LaserEngraving911

5 ай бұрын

Yes, absolutely its possible but you might smash the powder and not get the raised effect, as far as pouring in the engraving, you would also have to get the glue in there well which could be problematic. But def worth a go!

wooooooow

@LaserEngraving911

3 ай бұрын

its is pretty wow!! 😂

Where’s the video of you making the stamps?

@LaserEngraving911

18 күн бұрын

Haven't uploaded it yet.. thanks for the reminder!

Just an odd thought. How do you think the embossing powder would work spread over an engraved area then lasered again?

@LaserEngraving911

9 ай бұрын

tried it, its to heat sensitive to do it that way, heat gun works just right..

@hotattic

9 ай бұрын

Me not knowing much about lasers and not knowing what laser you use , would a 10w diode laser be a possibility?@@LaserEngraving911

You talk about cutting this out of paper theoretically, you could take a blank sticker material such as the every full page labels white not cut it down and make your stencil out of that because you could stick it in place I could stay in place until everything was done, and then it simply peels off easy

@LaserEngraving911

9 ай бұрын

great idea!

@dasplague3103

8 ай бұрын

I'd be concerned about if the sticker material can be heat cut without offgassing.

@jamesshelton1124

8 ай бұрын

@@dasplague3103 when laser cutting, you should have the proper airflow that holds the offgassing away so offgassing cannot be an issue

👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼😎

@LaserEngraving911

9 ай бұрын

😎😎

First

You're using the term embossing incorrectly for leather. Embossing in leather means its being actually compressed/depth to the design via pressure and/or heat. What you have done is called stamping, not embossing. Very very different. Stamping is essentially painting/colouring. Embossing is pressing depth into the material.

@kerrypratt6077

9 ай бұрын

I believe if you make the stamp with enough depth that you can probably combine the two processes. Emboss the leather using the positive and then apply the glue, or perhaps just fill the embossed mark on the leather with the powder, and then heat it up to fuse the powder into the embossing.

@LaserEngraving911

9 ай бұрын

I like your way of thinking!! 😎

@jonathanhorvat2452

9 ай бұрын

@@kerrypratt6077 i will try this out, was thinking about it during video