It was a fun making these videos..Hitting the 👍 button is an easy and free way to support the channel. Thanks 🙂 Watch the entire TinyHawk III Series Here: TinyHawk III RTF Impressions: kzread.info/dash/bejne/Y2WF0tZ7ktfId5M.html TinyHawk III RTF Full Specs: kzread.info/dash/bejne/gK6ozJqDfcK7YLA.html TinyHawk III First Flight: kzread.info/dash/bejne/hHeNxc-el7bQgqw.html TinyHawk III 5 Things I Like and Dislike: kzread.info/dash/bejne/e6Sf2bGQaLLFgsY.html SUBSCRIBE to see upcoming TinyHawk videos. Buy The TinyHawk III RTF Here: bit.ly/3x977ex Buy The TinyHawk III(Drone Only): bit.ly/3DE28Fp Buy The BabyHawk II Here: bit.ly/3czOpDI

@99dedbuffoons17

2 жыл бұрын

Is this supposed to come with an SD card? Mine didn't have one, or any tinyhawk 3stickers just emax ones 🤷‍♂️🙁

@OneManUnmanned

2 жыл бұрын

Mine did not come with an SD card or TinyHawk 3 stickers either. You can see what came with mine in my 1st impressions video linked above.

This has been one of my favorite aircraft for some time now. Good indoors but runs great outdoors as well, super safe. Love to fly it outside on a windy gusty day, really fun. My dogs snatched it out of the air one too many times and broke the frame in multiple places, still flew fine, a little wonky. Can't be glued because it is made of something like Polypropylene. A new body only cost $10. For a while, I liked how it flew with the broken frame, made it even more fun on a windy day, all wobbly and stuff. Finally got tired of the instability and replaced the frame, a somewhat tedios process. Runs like brand new. I beat the daylights out of mine, really rugged. Just got the EMAX TH2 Freestyle. That little thing is a beast, amazing.

@OneManUnmanned

2 жыл бұрын

The TH3 is definitely is a rugged beast of a drone. I've heard great things about the TinyHawk 2 Freestyle. I just reviewed a similar drone, the TinyApe Freestyle, and it seems to be a direct competitor to the TH2 Freestyle. That video should be coming out tomorrow. Check it out and let me know if there are any differences compared to yours. I would like to know, and maybe it could help other pilots in the buying process as well. Thanks!

Thanks for the information 100% gonna try to get this drone. ur underrated my guy

@OneManUnmanned

2 жыл бұрын

Thanks, I appreciate it and your support.

One of the most informative videos on this device!! Thank you

@OneManUnmanned

2 жыл бұрын

Thanks Allen, I appreciate that.

I bought this RTF based on your recommendation and love it. It's my daily flyer - no matter the weather. My dog loves it to, so we're already onto TH3 number three. Well, I bought two complete drones and number three from the first two plus spares. The video on using a TH3 frame to build an HDZ/ELRS is going on my list.

@OneManUnmanned

Жыл бұрын

That's Awesome Emanuel.. I'm glad you loved that build series. Three TH3 is alot! 😆

thanks mate, great video. I needed something to get me set up and flying and your video was exactly what I was looking for. Also, Emax must have listened, as I have bought my TinyHawk III 2 years after your video and the controller has labels on it!

@OneManUnmanned

6 ай бұрын

Haha..I noticed that as well. Thanks!

Thanks for your post, it's well done. My TinyHawkIII is supposed to arrive tomorrow!

@OneManUnmanned

2 жыл бұрын

Awesome...You'll love it! Welcome to the hobby.

I've been flying the T3 for a month or so and never thought of fishing the antenna through that hole. Thank you.

@OneManUnmanned

2 жыл бұрын

Haha.. cool 😎

Thanks for your video. Maybe I missed it, but showing how to set up the simulator would make this a truly all inclusive video. Also had a hard time telling which way the switches were. Great video! Never used a drone before was flying around the yard within an hour of unboxing.

@OneManUnmanned

Жыл бұрын

Thanks for the video. I did not cover the sim portion of this drone, but other reviewers have. I'm glad you got it working.

Just got mine and I must say I am very impressed. Got the RTF because I'm still learning betaflight with my Fullspeed leader 120 build. I'm now trying to figure out how to unlock 200 on the vtx without betaflight.... This thing is so much more powerful than I thought a 1s could be. Got 525mah 80/160c lipo sticks and couldn't be happier. Love this one and an going to order the hawk freestyle next

@OneManUnmanned

2 жыл бұрын

Awesome.. they are great drones. I think you unlock the VTX by pressing the button on the VTX while powering the drone.

Great video not zipping about like mad like some other reviewers to start with nice and easy which is where I want to be thanks for sharing.

@OneManUnmanned

2 жыл бұрын

Thank you Keith! I like the slow start as well.

Love your video. It's very helpful!!

@OneManUnmanned

2 жыл бұрын

Thank you!

Hey man thanks for the info. My drone is arriving soon, and I'm getting all the info I can. 👍

@OneManUnmanned

2 жыл бұрын

Awesome.. you'll love it, especially for indoor flying. I'm glad I could help.

@vizzieizzy

2 жыл бұрын

How are you liking it?

Very impressive throttle control!

@OneManUnmanned

2 жыл бұрын

Thank you Greg! Thanks for the support.

Awesome review !!!

@OneManUnmanned

Жыл бұрын

Thank you Mauro!

Subbed Great review one of the best

@OneManUnmanned

2 жыл бұрын

Thanks..I appreciate the support!

Nice brother, this is a great little kit! Keep up the great work man!! 👊🤙

@OneManUnmanned

2 жыл бұрын

Thanks, I appreciate it.

i am getting one too in about a month i bought one from marketplace with 14 batteries and 2 extra chargers for 210 euros a friend of mine will look at is to see if it still flies good and hes recieved it and he says it looks good so im exited to do my first flight!

Just bought this, love it but i do get a lot of signal break up and i struggle as i need glasses to read but loving it and it has wet my appetite to get into fpv deeper perhaps with a cinelog 25

@OneManUnmanned

2 жыл бұрын

Yes, it's a good starter kit and the goggles are subjective, especially when it comes to focusing distance. As far as the break up, make sure you're at the maximum power of 200mw.

Thanks for the video. Took mine for the first flights today. Lots of hovering. Trim seems weird like it wants to pull to the right. Not such a big deal when headed away but returning is really challenging. Is there a way to calibrate the controller to the drone?

@OneManUnmanned

2 жыл бұрын

Thank you James...I think you can trim the drift out using the trim buttons. As far as calibrating the sticks, you have to press the L3 button(Left trim-left button) while powering on the radio. The power light will flash fast, then flash slowly. Once the light is flashing slowly, then you can calibrate the sticks(all gimbals) by moving them in their full travel each direction. Once you have moved the sticks in all full directions, then you press the L3 button again. The radio should reset and reboot. I'll live a link to the E8 manual for better clarity and instructions: drive.google.com/file/d/1U1lzmPebaX2nCmFCzDBtlNtkOorMTkZ0/view?usp=sharing

My dad may have asked this, but I wanted to up the signal strength to the vtx. My problem is that at the moment I don't have a computer. Is there a way to up the signal strength without computer?

I am a total newbie to the drone hobby and thanks to your reviews I bought the Tinyhawk 3 kit. The drone comes with the VTX set to 25mW. I noticed that you and most reviewers fly at 200mW. I tried changing the VTX from 25 to 200 in the monitor menu. After saving the change on the monitor menu, the VTX was still at 25mW. How exactly can I get this done? Do I use Betaflight or are there other steps required when using the monitor menu?

@OneManUnmanned

2 жыл бұрын

I think some VTX comes locked from the factory(mine did not). To unlock it, you press the button on the VTX while powering up the drone.

Thanks for the video. I just got the Tinyhawk 3 and for whatever reason the left stick up / down does nothing. If I give it left / right it tries to yaw on the floor. Right stick also triggers the motors. This has to be something stupid / silly that I'm missing. Any ideas? Eager to check this thing out.

@OneManUnmanned

Жыл бұрын

That sounds weird... Are you in crash/flip(turtle) mode? This mode allows you to flip the drone over after a crash. Usually only the right sticks widths in this mode. You can also confirm that all your radio sticks work by plugging your drone into Betaflight, go to the receiver tab, and check if you see stick movements from all channels.

that was so smooth. i like how you hold the height. i cant seam to hold the height. yes i am new to this type of drone. i make small throttle but i cant keep it at one height.

@OneManUnmanned

2 жыл бұрын

Thank you. Yes, throttle management is difficult, but extremely crucial in FPV flying. I still struggle with that aspect of FPV flying as well. It will get better with time and practice.

Anybody know how to make it so it’s not a fisheye view? Please help

Hello. Thank you! I'm very new to this and I purchased the TW3 BNF, however, I have no clue how to bind the drone to the transmitter. Can you help?

@OneManUnmanned

Жыл бұрын

Ready Set Drone made a great video on how to bind any drone to the E8 radio. I'll leave it linked below. kzread.info/dash/bejne/faWowcqPfsbHZ9I.html

Hey nice videos, one question though, why is the video transmission popping in and out so much? For $170.00 I would hope the video reception would be better, or is it because of the beginning style goggles. Thanks.

@OneManUnmanned

2 жыл бұрын

Very good question... Some other reviewers have noticed the same thing, but I do feel it's the nature of the beginner style goggles and more importantly the quality of the DVR. My reception in the goggles was not as bad shown by the DVR. Analog DVRs have a history of doing this and showing more interference than what's actually experienced in the actual goggles.

@OneManUnmanned

2 жыл бұрын

Thanks for the support, and yes..170 dollars is alot of money 💰 🤑.

Hi. Can I run Mobula6/7 or other drones on these Tinyhawks goggle and radio? Thank you.

@OneManUnmanned

Жыл бұрын

Yes, as long as the drone is analog and uses the D8/D16 radio protocol.

Could you compare this drone to the geprc tinygo a good vs video would be cool, thank you

@OneManUnmanned

2 жыл бұрын

It's already made.. just have to edit it. 😊 Thanks for a great idea.

Can I put a 2s battery on this drone without like slowly breaking the drone because I want it to fly longer

@OneManUnmanned

Жыл бұрын

I don't know if it is setup for 2s. Try to find the largest 1S battery that can fit it.

Awesome flight footage, what are the PID settings that you used? new sub here

@OneManUnmanned

2 жыл бұрын

Thanks for the Sub... Since I do publish reviews on these drones, I keep the factory settings to get an objective feeling of the drones. So, factory tune, and it flies well on it.

Does the video feed look that choppy in goggles? Or is it just playback?

@OneManUnmanned

2 жыл бұрын

It's not that choppy in the goggles. The DVR records a little worse than actual experience.

Quality video brother, nice and smooth flying as well. Making me consider getting a micro drone so I can fly around the house when its raining outside. Subbed up!!! Look forward to more of your content as your channel continues to grow 😎💪.

@OneManUnmanned

2 жыл бұрын

Thanks, It's a pretty fun drone to fly indoors. I appreciate the support, boss.

@GregSupe

2 жыл бұрын

@@OneManUnmanned Of course man, happy flying. Next time I hope to see some sick acro tricks...😁✌🏾

Sick video, looks impressive. Do you know if the controller can work with PS4 to use as part of DRL sim? I’m learning and would like to have a controller that works with sim and this.

@OneManUnmanned

2 жыл бұрын

Thanks, I appreciate that. I'm not certain if it works with the PS4. It is compatible with computers though, and you can download DRL if that's the simulator that you're familiar with.

@DimmyV

2 жыл бұрын

@@OneManUnmanned That’s the one I am currently learning on, its training module is good, with some frustrations. My Mac isn’t powerful enough and prefer it was through PS4. Will do some more research. Any alternative to the Tinyhawk 3?

@OneManUnmanned

2 жыл бұрын

There's not too many whoops in this space of FPV, but the Metor 65 and Meteor 75 are good, as well as the Mobula6 and Mobula7.

@OneManUnmanned

2 жыл бұрын

The TinyGo4K is a good drone, but is only sold as an RTF kit.

@DimmyV

2 жыл бұрын

@@OneManUnmanned maybe be best to get an RTF first to learn on. Thanks 🍻

Thanks for the video!! Sorry for the possible stupid question, but is it possible to upgrade the recording camera somehow? Thats the only thing that is stopping me from buying this set, the flickering is insane and ruins any video, even a video quality of just like a Tinygo 4k would make me feel better! Cheers

@OneManUnmanned

Жыл бұрын

You can change/ upgrade the camera on it, but the camera is not bad. Most of the flickering comes from the fact that these drones are equipped with an Analog video system. The DVR can also contribute to the flickering(especially with this goggle). Any analog drone including the TinyGo will have interference in the video feed. The TinyGo is special in the fact that it records a digital feed to an SD card independent of the Analog transmission system.

@marciodasilva8797

Жыл бұрын

@@OneManUnmanned Thanks for the reply! So basically i would need to buy a cam with a direct digital SD recording, or is it much more complicated than i am assuming? Im new to this and it's a pretty complex subject haha - Thank you!

@OneManUnmanned

Жыл бұрын

Yes, it's more complicated than that. You can go for a digital system like DJI, HDZero, or WalkSnail to have clear image. You can also go for an analog system, with a split camera setup that sends a clear uninterrupted signal to an on-board DVR(examples are the TinyGo 4K or Mobula6 HD). I would recommend you do some research on digital vs analog transmission systems. There are benefits to both.

@marciodasilva8797

Жыл бұрын

@@OneManUnmanned Thanks!

Love tiny hawk but not sure without elrs how it is going to hold up. I know this is a full kit but sitill

@OneManUnmanned

2 жыл бұрын

Understood... yeah, ELRS is pretty much the future. I don't know how long EMAX and its engineers worked on this kit. It could have been months before ELRS became popular. Then they would also need to develop a transmitter as well(more cost to them). I think it will eventually happen. I think BetaFPV is the only company with an official radio with built-in ELRS.

Please help! Emax tiny hawk 3 won’t arm or bind to controller

@OneManUnmanned

2 жыл бұрын

I don't know exactly what you're experiencing, but there could be many things that may cause your drone not to arm. First thing to note is that your drone will not arm if the throttle is up. Throttle has to be at full idle(lowest position) to arm the TinyhawkIII. If your radio is in fact not bind to your drone, no radio switch or input will make the drone respond. Ready Set Drone made a great video showing how to bind the radio to the drone. I'll link it below. Hope it helps. kzread.info/dash/bejne/e3ubr7B9g8rRhMo.html

I was never going to be able to use these goggles that come with the tiny hawk kit, I am old and need reading glasses now. I got a digiadapter and a rapid fire module today and am now flying my tinyhawk 3 using my dji v2 goggles. 🙂😄😁😀

@OneManUnmanned

2 жыл бұрын

Haha..smart man. That's a killer combo. Wish I could afford the RapidFire.

Hey man great video, i just received my th3 but when i arm it the engines dont turn on.I did the binding in the intial set up, there a flashing light of rgb on the drone itself is that normal?

@OneManUnmanned

2 жыл бұрын

The drone comes "binded" from the factory and should work straight out the box. The "Arm" switch is the 3 position switch right above the throttle. Also, your throttle has to be at idle(fully down) in order to arm the drone.

@ste7en530

2 жыл бұрын

@@OneManUnmanned you are the man, i didnt have the throttle fully down, thank you!

@OneManUnmanned

2 жыл бұрын

Not a problem.. Glad I could help. Enjoy the drone and FPV.

@ste7en530

2 жыл бұрын

@@OneManUnmanned oh and another question if you don't mind, for the included charger I have the one 1s battery charging which is a solid green light, are the other open spots suppose to be blinking green all the time?

@OneManUnmanned

2 жыл бұрын

Yes, This is normal. The other ports that’s not being used will flash.

Maybe someone can help me cause Im not seeing this info...how do I hover? It seems the drone wants to turn even if there is no turn input. Just got it today and messing around finding I have NO control. If anyone has a good video on forst time maneuverability, please link me

@OneManUnmanned

Жыл бұрын

It's difficult to answer this question, not knowing your prior experience level. FPV drones are different than camera drones and are particularly difficult to control at first, or with little experience. They have little to no automation, and everything (including hovering) has to be done by you, the pilot. I would highly recommend downloading a sim, and start practicing. It's cheap, you can experiment while flying, and will create a stress free / no jeopardy environment to learn. If you still want to fly instead, here's a video I found about learning to fly. kzread.info/dash/bejne/ZWFnpNidmqrZhto.html

How do you charge the batterry’s without burning your house down?(with the charger that comes with the kit)

@OneManUnmanned

11 ай бұрын

I stopped using that charger a long time ago, but did not have any issue with it other than it was slow and that it only charged 2 batteries at a time. I have this now and would recommend something similar. They even have a newer version. kzread.info/dash/bejne/Zpx2z8utnrvgj7w.html

@jeltegielen9003

11 ай бұрын

@@OneManUnmanned alright thanks but k don’t have Many battery’s so don’t Realy need it yet. So how does the charger that you get with the rtf kit work? Do i just plug it in my laptop/charging brick and then just plug in the battery’s and pull it out if there full?

@OneManUnmanned

11 ай бұрын

Yes, plug it into a computer or brick. I think the lights turn green or go out completely when fully charged. It's always a good idea to monitor the batteries when they are charging. Never charge the batteries, and leave them plugged in overnight while you sleep.

@jeltegielen9003

11 ай бұрын

@@OneManUnmannedYess Thank you so much keep going man your doing great and I love your video’s

Mine doesn’t level at all in angle mode. It lurches forward.

@OneManUnmanned

11 ай бұрын

You might want to contact support or realign your gyro/accelerometer

I bought one for my son. He and I cannot get it to auto level no matter what mode it is in and we are inside. Any thoughts???

@OneManUnmanned

6 ай бұрын

When you say Auto-level, do you mean auto-hovering? When in Angle mode, or any mode for that matter, the drone will still drift, and not maintain altitude unless it has that specific feature. I think I need more clarification on what the drone is doing.

@FB-gm6el

2 ай бұрын

yeah you prettymuch need to be an accomplished drone flyer to have any chance flying these things. and good luck with the goggles- i can't use them because my eyes aren't perfect. the utter lack of instructions with this drone is maddening. it's basically garbage, and i regret buying it 100%. i played with it a few minutes when i got it then put it away, disgusted. now a few months later i can't even get the props to fire up. no instructions, of course. maddening.

Can someone please tell mw how ro get into the menu interface. I had this drone a month ago but broke it so i bought a new one but now i have forgot how to go into the menu. I knew how to do it before

@OneManUnmanned

Жыл бұрын

Left stick half way up and full left. Right stick centered, but full up.

@Iubas

Жыл бұрын

@@OneManUnmanned okay thank you very much 🙏

Great video! I got my kit today, so excited to fly it, but ran into a problem. Any pointers would be appreciated. All batteries charged, can see video on goggles, can pair radio to the tinyhawk3. But it appears the throttle (left joystick vertical movement only does not engage the motors. All other joystick motors appear to engage various pairs of motors. *--Update*: Thanks for letting me ask my question. Re-pairing the controller to the drone fixed my problem... After my first flight, I now understand the need for the simulator. so that will be my next step. Thanks for letting me vent

@OneManUnmanned

2 жыл бұрын

In order to Arm the motors, the throttle(Left stick) has to be at idle(fully down). So the throttle has to be fully down then hit the Arm switch. Let me know if that helps.

@gaojen3365

2 жыл бұрын

​@@OneManUnmanned That too is certainly possible. But at this time I do believe it was the re-pairing. Either way it is flying, and flying very well. I am at least 90% happy with my purchase. Now trying to get the controller to connect to my computer (2021 mac mini) for use with DRL. I even pulled out my good USB cables, from my Cell Phone engineering days, still no dice. so it looks like I need to buy a new ps4 controller to use with simulators. but if I am buying a new device to use simulators is there any merit in a "wireless USB simulator Dongle"? I would rather use my controller for the muscle memory. ​

@OneManUnmanned

2 жыл бұрын

I don’t know if a wireless USB dongle will work. Ready Set Drone has made a video on how to get your E8 radio working on a computer. I think It’s more of a driver issue causing this not to work. I’ll leave the video linked below, although it’s demonstrated on a PC not a Mac. kzread.info/dash/bejne/f5iGzqSIdNSZZps.html

saw the mishimoto parts. Do you have a Subaru?

@OneManUnmanned

2 жыл бұрын

No, but I wish I did though. It's for my Acura/Honda.

I'm sorry if you answered this You mentioned a fpv simulator? Can u give me info on it?

@OneManUnmanned

11 ай бұрын

Any simulator works…DRL, Velocidrone, LiftOff, and Uncrashed are all good options.

Thanks. Your video was REALLY excellent, a good review. But this and every other review I have seen of this drone shows such bad flickering of the video that it's a total deal-breaker. The video feed looks like a lightning storm. I don't know how you could fly through any gaps when the video is breaking up at least once per second. I'd buy this in a minute if it had a decent video feed. Do all analog drones have this? Guess I'm spoiled with the DJI Avata - does not have this problem at all.

@OneManUnmanned

5 ай бұрын

This is Totally normal in an Analog drone. It’s the main reason why digital is so expensive. The image on a digital drone is soo much cleaner, with less interference.

What's the time limit on that battery. Looks like it drains so fast.

@OneManUnmanned

Жыл бұрын

The battery normally last between 4-5 minutes. That's pretty standard for an FPV drone.

@bsi-blakkseriesinitiative7717

Жыл бұрын

@@OneManUnmanned okay thanks. I'm looking to buy a RTF drone soon. But trying to find a cheap price on AliExpress. x.x

Should I get this as my first drone i have little flying experience

@OneManUnmanned

Жыл бұрын

Yes, It’s one of the best drones to start in FPV. Everything you’ll need to start flying, is included in the kit. I would suggest you by additional batteries. You could also piece together a kit if you do some research, and know what you want.

@makka0215

Жыл бұрын

@@OneManUnmanned thanks

sorry for asking how do i make my drone fly level in angle mode

@OneManUnmanned

2 жыл бұрын

I don't know what you mean. In Angle mode the drone should be level once you release the controls. As far as maintaining altitude, you have to use the throttle to keep the drone in the same place.

@deadeye4256

2 жыл бұрын

@@OneManUnmanned the drone will shift too the left and slightly backwards. I updated it with betaflight and used the trim afterwards but it's not perfect albeit alot better. any clue?

@OneManUnmanned

2 жыл бұрын

These drones don't typically need to be adjusted in BetaFlight. Trims are not normally used in FPV drones. I would suggest you put the trims back to center then recalibrate your gyroscope/accelerometer in Betaflight. The drone needs to be in a flat/level surface when doing the recalibration.

@deadeye4256

2 жыл бұрын

@@OneManUnmanned okay how do I reset my gyro and

@deadeye4256

2 жыл бұрын

it's hard too belive you bought a perfect drone that flies dead level when mine drifts

How to record

@OneManUnmanned

5 ай бұрын

The FPV goggles has a built in DVR that sends the video to an SD card. You just have to press the record button.

What other drone can I used with the tiny hawk III controller and goggles?? I'm hoping that "Santa Claus" bring me this for Christmas :D. What would be a good 2s whoop to used whit this kit?

@OneManUnmanned

2 жыл бұрын

You can literally use any drone on the market as long as it has a D8 or D16 receiver in it. There are not too many 2S drones on the market. The one that comes to mind is the Smart16 by GEPRC, but it’s a tiny drone. There is also the TinyHawk 2 Freestyle(and its 2S powered). Something like an Emax NanoHawk X would be a good drone for this kit(its also a 1S drone).

I'm getting discouraged. I bought a Bugs 16 from Banggood, did all prep, hit auto takeoff, it went up 9', turned over and came down...not even 2 seconds and it no longer broadcasts wifi. I just got my Tinyhawk 3. Charged everything, goggles connect, switch into ARM position, nothing happens. The lights on the drone simply blink fast and that's it. Changing batteries did zero. What did I do wrong?

@OneManUnmanned

2 жыл бұрын

Hmm..flashing lights could mean anything. The throttle has to be at idle(all the way down) in order to arm. Try that and see if it works.

@MikeC-my4lf

2 жыл бұрын

@@OneManUnmanned $#!#^^#@!!!! I mean, yes, I believe you spotted the problem. Wow man. Ive got a looong way to go

@OneManUnmanned

2 жыл бұрын

Lol..You're good. I'm glad I could help, and maybe this comment will help future pilots as well. Enjoy!

@MikeC-my4lf

2 жыл бұрын

@@OneManUnmanned I know I keep bugging you...please forgive me...is it normal that drones want to drift backwards? Is it always a constant battle to keep it level?

@OneManUnmanned

2 жыл бұрын

Yes, it's always a battle to keep it level. The pilot is practically doing everything. That's why is so amazing to see all these well flown fpv videos on KZread. Anything can make a drone drift, even a ceiling fan inside a house. Having said that, there are trim buttons on your remote to help with drift, but I would not recommend it as it's not normal practice to use trim in FPV. Last option would be to calibrate your gyro in the drone or the gimbals in your radio. Those rarely need to be done in an RTF kit though. I think with time, you'll get better on the sticks and not even notice "drone drift".

what you going to put that turbo in? 😁

@OneManUnmanned

2 жыл бұрын

Good eye...I have another channel dedicated to automotive content. I have an Acura that needs its turbo replaced.

@G35Pearl

2 жыл бұрын

I was going to ask the sane thing haha

@OneManUnmanned

2 жыл бұрын

Haha.. awesome. Yeh, I'm a diehard car enthusiasts. Automotive content is difficult in many ways to make though. The other channel is BakeryPilot. I'll document the turbo swap eventually.

@G35Pearl

2 жыл бұрын

@@OneManUnmanned awesome man I’ll check it out. Your videos on this channel are top notch. I’m honestly surprised you don’t have more subscribers. I have a focus st so love me some turbskies!

@OneManUnmanned

2 жыл бұрын

One Man Unmanned was just started just a few months ago, and used what I learned (good and bad)from my automotive channel to help make this one better. It's still a work in progress. My wife owned a Fiesta ST and now has a Gti. Stock vs stock, the Fiesta was a more fun/engaging car.

Nice video.., don’t buy emax made to break crap

@OneManUnmanned

2 жыл бұрын

Alot of people buy them and have good experiences.

@lockingpaul

2 жыл бұрын

Obsolescence

Am I the only one that thinks the plastic cover on the drone makes it look like a cheap toy?

@OneManUnmanned

2 жыл бұрын

I think most drones look this way.

@TheCivildecay

2 жыл бұрын

@@OneManUnmanned well most FPV drones have that carbon fibre look that make them look more “professional”

@OneManUnmanned

2 жыл бұрын

Oh..I see what you mean now. Yes, it's a beginner's drone, and most of them are made of plastic to be more affordable and durable.