Elmo 16mm Transvideo TRV-16G Film to Digital Telecine Review

Тәжірибелік нұсқаулар және стиль

Elmo 16mm Transvideo TRV-16G film to digital review start to finish.

Пікірлер: 19

  • @errolforster2226
    @errolforster22262 жыл бұрын

    Hi. I enjoyed your video because I was in the transfer business myself in the 1980’s. I also had an Elmo 16mm telecine projector. It had a 5 bladed shutter which enabled a flicker free transfer from 16mm sound film at 24fps. It had to run through a telecine system though straight into a VHS or 3/4” VTR. Your ability to run straight into a computer is much more advantageous. I was also limited to standard resolution, no HD in those days.

  • @harperjonesii5695
    @harperjonesii56953 жыл бұрын

    I can vouch for those folks. Great communication and excellent service. They did a bang up job on some 16 mm color and B&W family movies from 1937 and 1939.

  • @gotmemories

    @gotmemories

    3 жыл бұрын

    Hey Harper! Thanks for the big up!!

  • @markjob6354
    @markjob63542 жыл бұрын

    I had one of those ELMO Transvideo 16's dialed in well. I sold it off, and later I totally regretted doing so ! BIG mistake ! These units are critically rare and are going for crazy ass prices ! 🥺

  • @gotmemories

    @gotmemories

    2 жыл бұрын

    Mark, yes they are indeed! The transfer industry has turned into an equipment hoarding business lol!

  • @DandyDon1
    @DandyDon1 Жыл бұрын

    Actually I believe the Singer Graflex was the first with the Easy-Load slot loading. The machines still have the pull down claw, and a sprocket style transport of sorts. It is however not anywhere as hard on 16mm film as a Bell & Howell Filmosound projector. It seems strange that the machine has an S-Video output but only a Monaural audio output, as there was some 16mm with dual audio tracks.

  • @gotmemories

    @gotmemories

    11 ай бұрын

    Thanks for your comment! 👍

  • @MORCOPOLO0817
    @MORCOPOLO0817 Жыл бұрын

    I am looking for the LED replacement light source for my dual 8 projector. The guy that used to make the kits no longer makes them. Anyone know who would do it?

  • @gotmemories

    @gotmemories

    Жыл бұрын

    Sorry can’t help there. Each is specific.

  • @Quickened1
    @Quickened13 жыл бұрын

    Am I right in assuming that this machine does not capture frame by frame?

  • @gotmemories

    @gotmemories

    3 жыл бұрын

    Every frame I can pull up on this and get a clear image. It’s not a seven figure rank cintel but it does a great job.

  • @lewschoen
    @lewschoen3 жыл бұрын

    What is the digital resolution that these units make? 640x480 or can it do higher?

  • @gotmemories

    @gotmemories

    3 жыл бұрын

    640x480, can’t go higher.

  • @lewschoen

    @lewschoen

    3 жыл бұрын

    @@gotmemories Is there any way to modify these machines, i.e replace the camera?

  • @alwarner6268

    @alwarner6268

    3 жыл бұрын

    @@lewschoen - His has the upgrade on it. The TRV-16 didn't come with S-Video. I think his was modified by Urbanski. The TRV-16H came with S-Video from the factory.

  • @lewschoen

    @lewschoen

    3 жыл бұрын

    @@alwarner6268 Thanks!

  • @luisnunez1688

    @luisnunez1688

    3 жыл бұрын

    I have this same project which I bought about four years ago. I myself made an update to the camera to have a better resolution since the original is not very good, now I have at least 720p.

  • @ER7ABY
    @ER7ABY2 жыл бұрын

    From where I can buy this one

  • @gotmemories

    @gotmemories

    Жыл бұрын

    They haven’t been sold retail wise since the early to mid 90’s. You can look online for used ones but a lot of the time they don’t work.

Келесі