I forgot to mention how much I enjoyed that they included the drilling guide in the kit and then tell you not to use it! I'm still giggling at that.

@scrimperuk

Жыл бұрын

Hi Mark, thanks for the extra comment. It was very easy to position the hole anyway without the jig, it won't be wasted though, it has found it's way in to my metal collection and will find a use one day in another project.

Have bought the kit.Didnt understand the template error. Great video. Very helpful. Thanks

@scrimperuk

Жыл бұрын

Thanks for your comment Jan. Template was designed as a drilling guide but it was only correct on some models, it's simple to workout where to drill without it anyway.

Our Men's Shed has just been donated one of these- and I was amazed at the poor quality of the guides; really lets down the saw. Will be buying or making a set like this...

@scrimperuk

Жыл бұрын

Thanks for watching and for your comment. Indeed the original guides are very poor quality, they are made of what my friend calls 'Muckite' (sort of cast alloy mix), whilst the replacements I fitted are proper machined alloy, they improve the saw hugely.

@Tensquaremetreworkshop

Жыл бұрын

@@scrimperuk Some call it Chinesium... Even if they used proper material, the design is rather strange. Running on the edge of ball races at each side and the back above the table, and rather crude sliding blocks underneath- one straight and one at an angle. Although I would normally make replacements (I have a machine shop) I think the Shed can afford these, as the saw was free... I find the fence rather poor too- if you tighten the clamp it moves inwards a couple of millimetres! I think it will need a fair amount of fettling. The inserts are crying out to be 3D printed, so no problem there. Thanks for your efforts.

Thanks very much John, I bought a second hand one of these and in renovating it the lower guide broke just as yours had (loved the improvised 3 pin plug replacement guide) and now I know where to get and how to fit some replacement guides.

@scrimperuk

Жыл бұрын

Many thanks for your kind comment Simon, so glad the video was of help to you.

I love your videos! Fun to watch even if I don’t have a band saw! Thank you

@scrimperuk

Жыл бұрын

That is really nice to hear, thank you so much.

Good to see you again John! I agree with you about those dreadful little table inserts - Record want eleven quid for that ghastly wee bit of plastic! I'm still using mine but it'll be a bit of plywood come the time. Thanks for this video, it's always nice to have maintenance information.

@scrimperuk

Жыл бұрын

Good to hear from you again Mark, I also have a Startrite bandsaw which I bought 30+ years ago with the same plastic inset the broke, the wooden version is still fine after 20 years.

Thanks for posting this video John. I managed to acquire a used Bas 317 recently. The durability of the metal seems fine, but i really dislike the design of the guides themselves. These replacements look great and I'll definitely be looking into purchasing some. Glad to see your still making videos. Edit: apparently this won't fit a Bas 317. back to the drawing board then.

@scrimperuk

Жыл бұрын

Thanks for the kind comment, shame the kit won't fit your saw but I bet there is a similar kit that will fit.

Second attempt to comment. I didn't realise the the Elektra Bekum was the same as my Record RSBS14. I bought it in 2001 and it came with the same blocks that you are fitting. So, my thinking is that the insert would be the same size. I 3D print mine these days and keep a few in a drawer. I've messaged you on UKWS. Thanks for another great video.

@scrimperuk

Жыл бұрын

Hi Gary, many thanks for your kind comment. I remember those Record bandsaws and they did look the same as the Elektra models. Great shame what happened to that great company Record who once manufactured top quality machines in their Sheffield factory until the switched to the far east. (I have replied on UKWS)

Good one John. I have a jet bandsaw and find that formica makes a great replacement insert

@fredtaylor6771

Жыл бұрын

Mark try formica as a replacement insert. I use it on a Jet.

@scrimperuk

Жыл бұрын

Thanks Fred, I never though of using formica, however the stuff I have is not thick enough or do you use a backing? The insert on this saw is almost 1/4inch thick.

@fredtaylor6771

Жыл бұрын

@@scrimperuk Fortunately mine was the correct thickness/

@jimdavis8391

Жыл бұрын

I think you're referring to Tufnol, usually in sheets 3 to 6mm thick, was used for circuit boards up until the 1970s.

Hello John greetings from Australia thanks for another great video . I thought you might be interested in a video called BAND SAW CLINIC WITH ALEX SNODGRASSS but make your tea first bye for now Tony

@scrimperuk

Жыл бұрын

Thanks for your comment Tony. I may have seen some Snodgrass videos. Tea is always top priority here, on the hour every hour!

Could you share with me how to slow a whirligig down.. thanks…. Is number of fans on propeller a start? Or what is a gear box… help.. thanks

@scrimperuk

Жыл бұрын

I have tried propellers with up to 12 blades on them but to be honest I am not experienced enough to say if more blades is faster or not, I have used a 3 blade propeller on a simple whirligig but generally I quite like them to 'whizz' around! Some years ago I built one with two chickens on and a 4 bladed all wood propeller, it was the first whirligig I built, it was really fast and one day in a storm the two chickens 'flew' off! The wooden propeller was like a Spitfire prop!

@CR10.07

Жыл бұрын

@@scrimperuk thank you. Again I do enjoy watching you in your shop. The chicken gig sounds pretty funny! What I want to know is how do you slow them down?

Thanks, very useful video. How much is the replacement kit as I'm thinking of buying a second hand one of these which may have this problem. Cheers, Joe

@scrimperuk

Жыл бұрын

Hi Joe, The kit cost £72 UK. the guides in the kit are far superior to those fitted originally which are made from a sort of cast alloy mix which many describe as "Muckite". One fitted the machine performs far better than before.

Hi.I cannot found that upgrade....0 matches for: conversion kit for metabo.....So?Where can I find it, please?Thanks

@scrimperuk

22 күн бұрын

It is not easy to find, if you look at my video description above I have added the actual link to the kit.

Hello John, do you know if this guide set would fit the Elektra Beckum 250 G model

@scrimperuk

Жыл бұрын

Not sure to be honest the 250 looks to be the same design only smaller in size, I would imagine you would be able to make it fit with a little fiddling, but probably best to have a word with the company selling the kit, their link is in my heading above.

You keep putting your hands in front of the camera.

@scrimperuk

Ай бұрын

It is not easy trying to carry out out a repair and at the same time operate cameras and explain what I am doing entirely off the cuff without any script. My main objective is only to show other people with the same issue how to do the modification. I don't make the videos for max views and have not received or claimed any payment from ebay for any of my video content. In essence I do the best I can with the filming but I am not a professional film-maker.

@matsvineyard7564

Ай бұрын

@@scrimperuk Sorry if my comment appeared harsh - more to help you make better vids. Good luck.