Electrolux Electric Drive Belt Replacement
Тәжірибелік нұсқаулар және стиль
This video provides step-by-step instructions for replacing the drive belt on Electrolux electric dryers. The most common reason for replacing the belt is if you hear the motor running but the drum is not spinning.
Buy part #134719300 now: www.repairclinic.com/PartDeta...
Additional dryer repair, troubleshooting tips, help with finding your model number, and part replacement videos: www.repairclinic.com/RepairHel...
You can find printable step-by-step instructions here: www.repairclinic.com/Repair-L...
Parts used: #2 square bit, phillips head screwdriver, flat head screwdriver
All of the information in this drive belt replacement video is applicable to the following brands: Electrolux
Connect With Us!
plus.google.com/+repairclinic
/ repairclinic
/ repairclinic
/ repairclinic
Join our free VIP email list for discounts and money-saving tips: tinyurl.com/pnnh3be
Check out our blog: www.DIY.RepairClinic.com
Don't forget to like and comment on this video, and subscribe to our channel!
Пікірлер: 26
I was concerned that the drum was going to put excessive strain on the belts when I removed the front plate, but your video reassured me of safely removing it. As a precaution, I still had several blocks of wood holding up the drum, and noticed that there wasn't much additional pressure once the front plate was off. Thanks tons for a great video. If you have this dryer or one of the several like it out there, it's worth it to take the front off until the blower motor is exposed just to clean it every 6-12 months... you'll be surprised how much dirt, sand, lint and junk are still down there sticking to the blower blades, regardless of how well you cleaned the lint trap.
Thank you for the video. Instructions were right on and saved me $$ doing the repair myself!
Brilliant explanation. Incredibly clear and idiot-proof. Thanks!
Thank you tremendously for this video. I got my Electrolux dryer belt fixed.
Great explanations and video
Awesome!! We have the same dryer that snapped a belt. You saved us $75 in repairs. Thanks so much for the easy to follow video.
@antwon5033
Жыл бұрын
P
How do you know what belt to buy?
Nice video to learn
Many thanks. Easy breezy
Thank you so much..
Very helpful
Hai boss how to install the new wascator Electrolux pls update full video
My dryer has two wheels? How do I put the belt on?
Bagaimana cara untuk membeli belt drum?
What about the gas line?
When I put the new belt on it is too tight and doesn’t turn easily? Why is that?
@adumb4965
11 ай бұрын
Happening me as well.. did you figure out??
@williamfonua2935
11 ай бұрын
@@adumb4965definitely because the idler pulley bearing seized
@Themitten
10 ай бұрын
It will give more with time.
Was so careful doing this and still have an extra screw somehow
@davidgaston7334
7 ай бұрын
Ive done this twice in 4 years and both times I've had a handful of screws. So far no issues lol.
My spring is wicked tight and doesn't look as easy as yours to pull. I put my new belt on but can not for the life of my put that spring to the hook on the bottom I don't know why and its bruised up my damn arm and irritating the heck out of me! Help!! Why is mine so much tighter than yours?
@amandaramalho6609
3 жыл бұрын
Never mind I was putting it in the wrong hole hahah damn is that how most guys feel posing their virginity cos it seems like I just did with putting a damn belt on lol