Electrical Safety: Underground Contact | WorkSafeBC
This workplace health and safety video shows what could happen when a backhoe operator contacts an underground power line.
This educational video can be used in health and safety training for operating excavators around energized electrical lines and conductors.
Working around underground utility lines is one of the most common hazards that excavator operators need to be aware of.
This video shows you what to do if you strike an underground power line with heavy machinery and the steps you should take to escape from an energized area.
Always contact BC 1 Call before you dig. Visit www.worksafebc.com/electricity for more information on working safely around underground utilities in British Columbia.
(Please note that bchydro.com/besafe is no longer available. Instead, visit bchydro.com.)
__________________________________________________________
We’re working to make a difference in workplace health and safety in British Columbia, Canada. By partnering with workers and employers, we help British Columbians come home from work safe every day.
Subscribe to our channel: kzread.info...
Find us on social media:
Twitter: / worksafebc
Instagram: / worksafebc
Facebook: / worksafebc
LinkedIn: / worksafebc
Visit our website for the most up-to-date health and safety information and regulatory requirements: www.worksafebc.com
Legal terms:
All videos posted by the Workers’ Compensation Board (“WorkSafeBC”) are protected by Canadian and international copyright laws, policies, and treaties. The use of WorkSafeBC videos and other materials is governed by WorkSafeBC’s copyright and trademark statement, available here: www.worksafebc.com/en/legal/c.... Videos cannot be uploaded to other channels without prior permission. If you wish to request permission for use of our videos, please contact us: copyright [at] worksafebc.com
Пікірлер: 32
Contact BC 1 Call before you dig. Learn more about working safely around electricity at worksafebc.com/electricity.
I've watched a bunch of these videos and I've concluded that BC is the most dangerous place in the world to work.
@NicholasLittlejohn
3 жыл бұрын
Or safest
@randomdude6827
3 жыл бұрын
lol.
@chrisandrews414
Жыл бұрын
im glad im not the only one who wandered in here
@Aranimda
Жыл бұрын
China is safest, because you never see warnings for dangers nor accident investigations there.
this feels like the beginning of a 90min drama based on a true story.
These short construction safety PSAs are always OP to watch! Short, direct, and to the point about safety. Like those old PSAs from the 80s and 90s!
That is why there is the so-called "Julie Law"--where you are required by law to call utilities before you dig or do any excavation project, especially in the State of Illinois. That law was implicated to prevent such disasters like the simulated disaster you saw in this video. 10 meters is about 33-35 feet.
@JamesSmith-jq2jc
3 жыл бұрын
Even they make mistakes, or miss something. I seen it myself when working with an excavator, he dug up a fiber optic cable and cut the line. He was upset, I said I'd be mad as hell, it could of been a electrical cable and killed him.
@crazypete3759
3 жыл бұрын
10 meters is EXACTLY 32.8084 feet
Good information .. But why still operator inside the cabinet?
Scary stuff
i have seen this on a job site under ground power boxes caught fire for at least 200 ft
0:20 absolutely nobody is smart enough to know that ''an area can be energized''... not even most electricians unfortunately
@marcusorcasitas7401
Жыл бұрын
That's not how electricity works if you break it underground a loud arc flash can happen until short is blown apart or Tripps or transformer blows it may still have power but it does not mean that rock and dirt becomes conductive hi volt can reach out and touch you but most likely it will go straight to earth before you because there would be less resistance
Actúan mejor esta gente que muchos de holyywood.
Permit to dig required then scan the area and a banksman to keep watch
ZAPPITTY DOOOOO!!!! ⚡️🔌💡⚡️
Play at 2x
Zzzap Look both ways...cover it back up with dirt Act natural, like nothing happened Blame some other guys for the problem if its discovered That's how the pros do it
If you hit a line don't stop making the cut. I think they should tell people not to get off machine if you come in contact with a power line.
@williamweaver1862
5 жыл бұрын
ever heard of step and touch potential? If you make contact, and the machine bursts into flames... then what?? you jump clear as far as possible (if possible without contacting conductive components) from the machine with both points of contact together e.g with both you feet touching not 5 or 10mm.. TOUCHING! you then hop with both feet together out of the exclusion zone for the applicable voltage from point of contact. N.B Only to be performed if additional immediate threats to life exist. the last thing you want to do is continue the cut, 9/10 utilities are run together.... so after contacting the first phase it might be another phase without protection... it might also be a gas main.... excelent combiniation when youve got a live exposed cable right beside it now.
I hit them all the time.
What's a meter?
@TheHAMR1111
7 жыл бұрын
Stenchx 1000 mm, 100 cm, 1.1 yrd, 3.3 ft, 1,000,000 microns, 1,000,000,000 nano meter,s 1.06E-16 light years, .59 smoots, 200,000,000 beard seconds, .2 rods, .002 Li, or 39.38 inches.
@gorillaau
6 жыл бұрын
Gotta remember to use smoots more often. Thanks for the reminder.
@marshalljimduncan
5 жыл бұрын
A meter is a tool used to check electrical current and voltage.
@neophobicnyctophile8264
4 жыл бұрын
A little more than 2 Cubits
@williammoses6232
4 жыл бұрын
a meter is 39 inches 10 meters is about 33 feet
AC, DC inń BC 😲😲😲😱😟😰😟😰😩😩😩😩😩😩😨😨😨😨😨😧😦😥😨😱😲😲😲😲😲😳😵😶😵