This is in fact a PR Bobbin knot. The device is effectively the electronic version of the manual bobbin. It does seem to work well ! Thanks for posting it !

It's the best tutorial video on KZread that is made by the electronic Knot tool.

Another unbiased and informative presentation👍

@fishmadpro7210

2 жыл бұрын

Thx Don!👍

Love this gadget!

This is a big Help.

thanks for the video it helped heaps. thank you

@fishmadpro7210

2 жыл бұрын

Glad it was helpful!👌

GOSTEI MUITO PRATICO E EFICIENTE ! OK

Otima explicação por esse ângulo fica bem melhor o entendimento

This looks like an excellent tool for me as I have a badly damaged left hand. How heavy of mono or flouro leader can this be used with? I fish with 60lb and 80lb mostly.

@fishmadpro7210

2 жыл бұрын

Hello Klaus. It works perfectly well with 0.6-3 mm. line.

Unfortuneately this is NOT an FG knot

@billbfjvgjj8867

Жыл бұрын

I was about to say the same thing .

@TheBentarm

Жыл бұрын

I'm not sure about the knot but I like your presentation style, well done. One thing, it's a half hitch, not a half inch. 😊

@fishmadpro7210

Жыл бұрын

🎣👍

@pjc71

Жыл бұрын

It’s a PR knot but bravo on the demonstration and presentation.

@AMPLEDOCK

11 ай бұрын

@@TheBentarm actually it’s not even a half hitch it’s a full hitch 👍

Is the best👍

I just seen this somewhere else and had to look it up. When I did a search for it I also came up with the FG Wizz....... I'd go with the FG Wizz over this contraption.It doesn't need batteries,no need to use both hands and your teeth,and being made of wood it'll float unlike this thing that will only stop sinking once it hits Davy Jones's Locker. I can also make one for next to nothing since I do woodworking.

It’s a PR knot. They are made with a PR bobber and on ve you get the hang of the technique it’s faster than the machine.

PR which is very strong and much easier than the FG itself

Seems good for people with limited are and finger use. I can tie it faster by hand.

Awesome tool been looking for something like this, can you tell me the brand and where to get it, Thank you.

@fishmadpro7210

Жыл бұрын

Hello. The link to the tool is within the description...

@gunterromeo8979

Жыл бұрын

Thank you .awesome.

Hi Could fly line be used with this tool to connect leaders

@fishmadpro7210

2 жыл бұрын

Hello. You can use any type of line as long as it is 0.6-3 mm. in diameter.

@Jimbobdammit

3 ай бұрын

No- just a few turns in a nail knot is easy and secure on fly line

Where’d you get those scissors? I like them.

@fishmadpro7210

2 жыл бұрын

Hello. You can find them here: amzn.to/3cZYwBH but I would not recommend them. If you want quality scissors, which are only +2$, check out these instead: amzn.to/3nYEXAb

@missiletm

2 жыл бұрын

@@fishmadpro7210 good to know, I have the boomerang snips already. Thanks for the reply!

Onde acho esse aparelho ? .sou do Brasil , moro em mongaguá litoral sul de São Paulo, pesco na plantaforma de pesca . La é a maior plantaforma se pesca da merica latina .✌😎👍🇧🇷

Can use for main line braid 6lbs ?

@fishmadpro7210

2 жыл бұрын

Hey. Yes, you can

I finished tying up 3 fg knots manually only by hand when it took u approx 5mins to do so for one using this gadget.

@fishmadpro7210

Жыл бұрын

If you can do it by hand 3 times faster, then you don't need this gadget...👌

@andremiller1566

Жыл бұрын

I'm very curious. Is an FG knot stronger than simply connecting your main to leader using a swivel barrel and your knot of choice? I would greatly appreciate your insight🙏

@iwill9422

Жыл бұрын

@@andremiller1566 FG knot would not be stronger. BUT it allows you to use a long leader and you can reel in into the spool. This is helpful in many situations. I use this knot on all my spin tackle. I can use 15lb braid but adjust leader to different sizes. I change between 6,8,10 lb test very often.

@andremiller1566

Жыл бұрын

@@iwill9422 Ok this makes sense. Thanks for the info.

@jasonhilton-ft3iz

6 күн бұрын

The FG knot is the best knot there is. Very very strong ​@andremiller1566

Not an FG knot. The FG not alternates loops between two different strands... this knot... like an albright or PR bobbin, has the loops in one direction, in succession, in two different layers. Not the same not. And i dont think this is quite the same as a PR bobbin but as others have commented, they make a tool for that too

@andremiller1566

Жыл бұрын

I'm very curious. Is an FG knot stronger than simply connecting your main to leader using a swivel barrel and your knot of choice? I would greatly appreciate your insight🙏

@sashahess3141

Жыл бұрын

​@@andremiller1566a lot stronger, you should always use leader knots for braid.

Half Hitch?

This knot is PR knot or reverse PR knot.

es necesario quemar el fluorocarbono? gracias

@fishmadpro7210

Жыл бұрын

Sorry, I do not speak this language...

This can be done with anything from a power drill to a doorknob and pencil.

Nice 👍🏻

@andremiller1566

Жыл бұрын

I'm very curious. Is an FG knot stronger than simply connecting your main to leader using a swivel barrel and your knot of choice? I would greatly appreciate your insight🙏

@Ms_Fishing34

Жыл бұрын

Depends on person actually I think. Because there are many way to connect main to leader

@andremiller1566

Жыл бұрын

@@Ms_Fishing34 Thank you for your response! So it might be considered amateur but not necessarily inferior?

@Ms_Fishing34

Жыл бұрын

There are strong and weak. Must try and error

@andremiller1566

Жыл бұрын

@@Ms_Fishing34 Will do👍. Thanks for chatting 🙏.

Would just slip off as soon as you put any weight on it, no tension when doing the windings

All that extra work after the machine, just easier to do it manually

มาชมครับผม+1ครับ

Can this tool handle braid as thin as PE 0.3?

@fishmadpro7210

11 ай бұрын

Hello Christos. Yes it can

@christosstavrinides8493

11 ай бұрын

@@fishmadpro7210 thanks a lot. yes, it is not an fg knot, rather an improved albright knot, but still, it looks like it does the job pretty well. will wait and see. from 3:20 and onwards it is the same as the fg knot pretty much.

Can you use this to tie PR knote?

@fishmadpro7210

2 жыл бұрын

Hey. I haven't tried PR with this gadget, but in my opinion all is possible...I might make a vid about it...

@stevennguyen7443

2 жыл бұрын

that WAS a PR knot .. not FG

This is a PR knot, which is typically stronger than the FG

Looked more like a improved Albright knot.

@johnbuniack5671

Жыл бұрын

Like an Alberto knot, but not quite.

@FishNFoolLures

4 ай бұрын

Wrong the Albright/Alberto knot has a doubled over leader and this ties around a single strain

always use a rizzuto finish for your FG knot guys. trust me, it's way stronger than any other finish out there.

Honnêtement je préfère le Knot Assist 2.0

Looks like an unlooped Alberto knot.

@gentleman.angler

2 жыл бұрын

Nothing to do with Alberto Knot because in Alberto the braid is wrapped in a double mono line in the video the knot is 100% the FG knot.

@SquireBozorth

Жыл бұрын

yeah not even same arena as alberto

wouldn't the braid be the main line? I think you said it backwards

@fishmadpro7210

2 жыл бұрын

I might of said it the wrong way...it's not easy to speak on camera as many people think. The main purpose was to show how to use the tool and I think that all was covered...👌

@johnnycash7803

2 жыл бұрын

@@fishmadpro7210 it was buddy I just got confused a little at that part

Ezen még finomítani kell! Tönkreteszi a monofilt...

😂😂😂 ЛЕНЬ - двигатель прогресса😂😂😂.

It would be cool… if that thing would make a FG knot. In fact, the knot he made is so simple I don’t see the need for a tool unless you are handicapped in some way.

@fishmadpro7210

11 ай бұрын

If you don't need the tool, don't spend $ and do it by hand...

I know nothing about fishing Why is this not a pr knot or whats the difference? Is it weaker? If it is weaker, could you use that for connecting two fishing lines anyways? I saw this for cheap online and am thinking about buying a bunch and giftig them to local hobby fishermen at our river. Dont want to do it if its trash. Why would you even want to connect to lines together, is it when one spool is almost out but you want to use it up before throwing it away?

@fishmadpro7210

3 ай бұрын

Hey. It might be that this tool is not for them as it depends on the type of fishing. Ask them if they would use it and if not, it's a tool that is nice to have in your tackle box...

I can see why people would like this machine but it’s probably quicker and still less fiddly to just use a double uni knot to join your leader to main line.

@FishNFoolLures

4 ай бұрын

Because the uni to uni knot is about 1/3 as strong!!! You might as well tie a granny knot because that's how poor a uni to uni is lol.

Too bad that is not an FG knot .. there are no tools out there for an FG knot. that's a PR knot .. a bobbin tool does the same much cheaper.

@internetuser4601

Жыл бұрын

There is the Daiichi-seiko Knot Assist 2.0

@denisboulavine5007

Жыл бұрын

I bought this device on eBay. LEO brand. Watched the video about ten times It didn't work for me at all. When I try tightening the "knot" the mono line keeps sliding out. Find it hard to understand how this "knot" could work even in theory because it is essentially multiple twists of braid around the mono that you run down then up. If you think about it logically it comes as little surprise that the mono pulls out from those twists when you try tightening the "knot" ☹️

@internetuser4601

Жыл бұрын

@@denisboulavine5007 Hello Denis, Sorry, but I'm not sure what LEO brand is... I understand it doesn't *seem like it should work, but done correctly, it surprisingly does. That's what the FG knot is -- alternating braid wraps on leader. It works on the principle like a Chinese Finger Trap. I have found the key to tying it properly is to 'serve' the knot. JP DeRose has a good video showing what he means by 'serving' the knot: kzread.info/dash/bejne/gYt9k8SThdnWj7A.html . The first time I used the Knot Assist 2.0 (also my first FG knot), my leader pulled through as well. That's when I found JP's video. After properly serving my knots before finishing, I have never had one fail. Hope this helps 😀

@internetuser4601

Жыл бұрын

See also non-tool FG knot: kzread.info/dash/bejne/eqWLptatds22Yto.html

@internetuser4601

Жыл бұрын

@@denisboulavine5007 Sorry, I got notification of your comment and assumed it meant you replied to my post. That said, 'serving' the knot should also apply with that tool. Same principle. There are other videos showing PR knot.

Looks like it's creating an Albright

More PR than FG

That's not at all close to being a FG knot. I believe that's closer to being a PR bobbin?

@geekiejesus8482

2 жыл бұрын

Thats what I thought? The FG was all about the alternate line twists. This just wraps one around the other almost in the same style as an Allbright.

@SquireBozorth

Жыл бұрын

this is a PR knot NOT FG but still great strong knot

Swivel and done.

Not an FG knot but nice video anyway

I can tie 3 real fg knots in the time of this video while being in my bellyboat out on the water

@trucksntrucks3753

11 ай бұрын

video please

@chriss12488

10 ай бұрын

Yeah u are right, a real fisherman doesn´t need any tool especially on the water. much faster without it.

@fishmadpro7210

10 ай бұрын

When you are young and don't have any problems with your hands or fingers - Yes, but with time, all can change...

@pollekem6459

10 ай бұрын

@@fishmadpro7210 I agree and eyes are a second next to the hands

@menshawyshiref

9 ай бұрын

But is it strong enough???

That's is basically an ALBRIGHT knot which in my opinion is better than a fg and I can tie it 5 times faster by hand

You have to be kidding. I can see using this when I’m actually fishing.

1\2 hour later

The bottom end of the tool that the mono/fluro clips into damages the line, absolutely useless for fine lines below 20lb, good tool for cutting line tho 😂 why they make the clip so sharp 😢

Fg knot, what fg knot?

@andremiller1566

Жыл бұрын

I'm very curious. Is an FG knot stronger than simply connecting your main to leader using a swivel barrel and your knot of choice? I would greatly appreciate your insight🙏

Nice demo but that's not an FG. Probably closer to a PR knot.

In the time that it took you to make one knot with this gadget, and on your other video, the other gadget, I could’ve made three Yucatán knots by hand. So much for gadgets.

@fishmadpro7210

Жыл бұрын

These gadgets are useful for some, and for others, they are worthless, like in your case!🎣 I'm glad that you can make knots much faster by hand...👌🐟

It’s a poorly repurposed Bimini twist! Or pr knot but lacks the clinching of the fg knot and looks like it’ll take longer to tie with the tool just my opinion!

You don't tie half inches but half hitches.

8 minutes?? I tied my line and put the first one in the cooler already

They are half hitches

Faster by hand

@andremiller1566

Жыл бұрын

I'm very curious. Is an FG knot stronger than simply connecting your main to leader using a swivel barrel and your knot of choice? I would greatly appreciate your insight🙏

Don't burn. Do rizzuto

Not an FG knot, it’s basically a PR knot and the word is half hitch, not half inch. Cool gadget though.

Good Tool ! but it is not FG knot...I will use the bobbin for this knot. , much easier and doesn't need any battery.

@andremiller1566

Жыл бұрын

I'm very curious. Is an FG knot stronger than simply connecting your main to leader using a swivel barrel and your knot of choice? I would greatly appreciate your insight🙏

That is your leader, not mainline 🤦‍♂️ 1:33. (Half hitches, not half inches)

why not just save $17 dollars and tie a 2 loop connection?

@fishmadpro7210

Жыл бұрын

The choice is always yours... Use other knots if they work well for you

Thats PR knot, not FG

FTFOH with that

Not sure FG. More like a PR

It's a PR knot. Not FG.

Not an FG knot! If you want FG use this method kzread.info/dash/bejne/ZIOVj9hyqbeXY84.html

Too much manual work for an auto device.😅😅

not an fg not

this is not FG Knot...

This is a PR knot. It definitely isn't a FG knot...

This is not an FG knot

Interesting knot, but it's called half hitch not half inch

I presume this is a comedy show???????

Maybe he should read the manual as this is not an FG

@andremiller1566

Жыл бұрын

I'm very curious. Is an FG knot stronger than simply connecting your main to leader using a swivel barrel and your knot of choice? I would greatly appreciate your insight🙏

I see a wasted of money

Thank for inventions but not useful

I tie it 3x faster with my hands

@fazerfzx

4 ай бұрын

Apparently you don’t realize he’s going VERY SLOW and explaining how to do it.

Super gimmicky. I would not put a $50 lure on the end of this line tbh. Not that it's a bad knot, but there are much better ones which I can tie faster.

@testboga5991

3 ай бұрын

I wouldn't put a €50 lure at the end of any line 😂

What a damn mess of a device...

I can tie a knot faster with my hands and both eyes closed

Too long and too complicated !

This is Not a FG!!!

@andremiller1566

Жыл бұрын

I'm very curious. Is an FG knot stronger than simply connecting your main to leader using a swivel barrel and your knot of choice? I would greatly appreciate your insight🙏

@samuelfellmann6773

Жыл бұрын

@@andremiller1566 the FG is especially for spinning or jigging caus it moves smooth to the rod rings. But also I think there is no better knot than fg caus is is not a knot it is a binding

@andremiller1566

Жыл бұрын

@@samuelfellmann6773 Thanks for responding! That's pretty cool. A binding moreso than a knot. I appreciate your response.🙏

Took too long😂 hand is better

What a waste of money!

That's useless...

this is not an FG knot

I bought it and it was a nightmare. I've tried dozens of times but there's no way I can complete a knot. After inserting the mono (0.55) on the left and the braid (1 PE) on the right and starting the machine, the two threads intertwine in the upper part and it jams.

@fishmadpro7210

10 ай бұрын

It might be that the one you've received was dfective as I had no issues with mine...

@marcospalluto.

10 ай бұрын

@@fishmadpro7210 It Is possibile to send you a video in some way?

@fishmadpro7210

10 ай бұрын

I don't think it's possible...😐

@marcospalluto.

10 ай бұрын

@@fishmadpro7210 I don't think it's faulty, the mechanism seems to work fine. The problem is that the two lines systematically intertwine at the top where they exit. In your opinion, is it possible that it is not suitable for 1PE braided line? in theory it should be suitable from 0.6 onwards

@fishmadpro7210

10 ай бұрын

@marcospalluto. It might be. I'd suggest testing it out with different line types and sizes, and if the same is happening with all of them, It's definitely the gadget, not the lines. BTW, sorry to hear that you've got issues with the tool...

If you need this piece of crap for fishing I suggest learn something else . Fishing isn’t for you if you can’t tie a simple knot